CS Paper Radar

FlowSep-RF: Rectified Flow Matching for Single-Channel Radio-Frequency Signal Separation

Mohamed Kamel, Tamer Nadeem

eess.SP cs.LG ·submitted 2026-10-14 14:31 UTC · v1

Abstract

Single-channel radio-frequency (RF) signal separation is important for interference mitigation when a signal of interest overlaps with a co-channel interferer in time and frequency. Classical matched filtering and LMMSE receivers are limited under structured non-Gaussian interference, while diffusion and score-based methods often require iterative sampling or optimization. We propose FlowSep-RF, a rectified flow matching framework that learns a clean-endpoint transport from the received mixture to the signal of interest. The model combines time-domain IQ samples with frequency-domain features and recovers the separated waveform using one endpoint velocity evaluation. We evaluate FlowSep-RF on QPSK mixtures with OFDM-BPSK, OFDM-QPSK, and RFChallenge CommSignal2 interference against classical, discriminative, and generative baselines. FlowSep-RF achieves the lowest average BER and MSE among evaluated baselines across all three settings with one-step inference.

Comment
5 pages. Preprint. Under review

Closest papers

Nearest neighbours by meaning across the whole index.

Toward Interference-Agnostic RF Source Separation

cs.AI eess.SP ·2026-11-13 ·Maxence Albert, Raphaël Duroselle, Thibaud Ehret, Olivier Boeffard, Jean-François Bonastre
similarity 0.62
Abstract · 5 pages, 3 figures, 1 tabs. Submitted to ICASSP2027

Separating a radio-frequency signal of interest from a co-channel interference is mostly addressed with specialized separators, each trained for one pair of signal and interference types and therefore relying on a label that a heavily jammed receiver cannot identify. We show that this reliance is not benign: applied to an interference it was not trained on, such a separator usually fails to recover the signal, and in most of the cases we measure it leaves the signal worse than no processing at all. We then train a single separator over every pair, giving it no indication at test time of which one it faces, on two architectures with no component in common: the convolutional WaveNet of the ICASSP 2024 RF Challenge, and a band-split transformer that we adapt from music source separation. Both behave the same way. At the size of one specialized model, the unified separator stays close to the whole models it replaces, keeping the bit error rate close on almost every pair, better on one and worse on another. On an interference absent from every training set, it does as well as the best specialized model, without anyone having to choose which one to deploy.

0.24

FLOMSS: Generative Music Source Separation by Flow Matching

cs.SD ·2026-10-13 ·Shuyang Cui, Zhi Zhong, Keisuke Toyama, Koichi Saito, Qiyu Wu +8 more
benchmark similarity 0.59
Abstract

Music source separation (MSS) has been conventionally addressed by discriminative methods. Recently, flow matching has emerged as a strong generative paradigm for modeling complex data distributions, with successful applications across diverse domains. These advances motivate us to systematically investigate flow matching for MSS in a four-source (Vocals, Bass, Drums, Other) setting in full-band stereo. Specifically, we investigate prediction targets, flow paths, single-source versus multi-source modeling, and mixture consistency constraints. Beyond the signal-level metrics commonly used for MSS, such as signal-to-distortion ratio, we further evaluate MSS methods using embedding-based metrics, as well as a listening test, providing a comprehensive benchmark. On MUSDB18-HQ, our proposed model exhibits competitive performance in both objective and subjective tests, highlighting the potential of flow matching for generative MSS. Demo: https://ik4sumii.github.io/FLOMSS/

0.29

FACE: Flow-Guided Angular Channel Estimation Framework for mmWave MIMO Systems

cs.LG ·2026-11-16 ·Samitha Gunarathne, Eslam Eldeeb, Nurul Huda Mahmood, Matti Latva-aho
benchmark similarity 0.58
Abstract · 14 pages, 11 figures

Acquiring accurate channel state information (CSI) is essential for millimeter-wave (mmWave) multi-input multi-output (MIMO) systems. However, it remains challenging due to high-dimensional channels, limited pilot observations, and measurement noise. To address these challenges, we propose flow-guided angular channel estimation (FACE), a novel channel estimation framework based on flow matching, an emerging generative modeling paradigm that learns continuous transport dynamics between probability distributions. FACE exploits the inherent angular-domain sparsity of mmWave channels and incorporates the learned flow matching model as a generative channel prior. Numerical results show that FACE consistently achieves higher channel estimation accuracy than both conventional estimators and diffusion-based generative estimator across diverse channel and system configurations. Moreover, FACE maintains high estimation accuracy with fewer pilot observations and achieves an average achievable rate close to the perfect-CSI benchmark. Compared with diffusion-based estimation, FACE requires substantially fewer sampling steps while achieving superior or comparable estimation accuracy, reducing inference time and computational cost. Overall, the proposed framework demonstrates the potential of flow matching for accurate, pilot-efficient, and computationally efficient mmWave MIMO channel estimation.

0.33

RFShape: An IQ-Pretrained Wireless Foundation Model for Heterogeneous IQ & CIR Representations

eess.SP ·2026-11-02 ·Mohammad Cheraghinia, Sebbe Van Der Smissen, Jaron Fontaine, Delia Rico, Eli De Poorter +1 more
similarity 0.57
Abstract · 17 pages, 12 figures, 8 tables

In wireless systems, foundation models have been proposed as alternative artificial intelligence models to replace task-specific models with a shared pretrained model that can be reused across many downstream applications (source separation, interference detection, localization, etc.). These wireless foundation models promise to reuse learned representations across diverse tasks, but choosing a foundation model also means choosing its input representation. For example, a model pretrained on spectrograms expects spectrograms, while one pretrained on in-phase/quadrature (IQ) samples expects IQ, limiting which pretrained model can be used for a given downstream problem. To remedy this, we present RFShape, a 7.4 M-parameter foundation model that breaks this coupling by adapting how a signal is presented to a shared pretrained encoder. RFShape is pretrained solely on synthetic IQ waveforms, without real captures, labels, or channel impulse responses (CIRs), and uses deterministic representation operators to support heterogeneous downstream inputs. Across ten tasks and nine datasets unseen during pretraining, the same encoder supports classification, ranging-error regression, and two-dimensional positioning. Representation selection alone increases 23-class radar recognition from 23.0% to 69.5% and short-range technology recognition from 70.8% to 97.1%. RFShape also outperforms CIR-pretrained ultra-wideband baselines by up to 12.7 percentage points for (N)LOS classification despite never observing CIRs during pretraining. These results show that foundation-model reuse need not be limited by the representation or modality seen during pretraining, and adapting how a signal is presented can extend a single pretrained encoder across heterogeneous wireless tasks.

0.30

Iterative Audio Separation with Mixture Consistency via MIMO Model Extension

cs.SD cs.LG ·2026-09-07 ·Yukara Ikemiya, WeiHsiang Liao, Yuki Mitsufuji
similarity 0.57
Abstract

This paper proposes a general framework for stable and effective iterative audio separation with mixture consistency by extending source separation models to a multi-input multi-output (MIMO) configuration. In the field of audio separation, mixture consistency is an essential property for many applications that require accurate phase and timbral information of target sources. While iterative approaches such as diffusion models achieve perceptually superior results in speech enhancement or user-guided target source separation tasks, most existing methods focus on single-step separation with a single-input single-output (SISO) or single-input multi-output (SIMO) configuration through architectural improvements, since mixture-consistent audio separation is generally regarded as a regression problem that admits a unique solution. By extending these architectures to a MIMO configuration, we introduce iterative prediction without compromising the architectural advantages or the characteristics of mixture consistency. We conduct a comprehensive ablation study of combining the framework with discriminators and extending it to a generative model. Experimental results demonstrate significant performance improvements when applying the proposed framework to state-of-the-art separation models.

0.29

Low-Complexity Sequential Detection Framework for Single-Channel Co-Frequency Signal Separation

eess.SP ·2026-09-03 ·Heng Wang, Kexian Gong, Peng Sun, Wei Wang, Hua Jiang
benchmark similarity 0.56
Abstract · This work has been submitted to IEEE for possible publication. Copyright may be transferred without notice, after which this version may no …

Practical separation of single-channel co-frequency signals (SCCFSs) is hindered by the prohibitive computational complexity of benchmark algorithms. To address this issue, we propose a low-complexity separation framework based on sequential detection (SD), in which signal separation is cast as a sequential path search over a trellis. To support both hard-decision detection and log-likelihood ratio (LLR) extraction, we develop two algorithms within this framework: the SD-based separation (SDS) algorithm and its soft-output variant (SO-SDS). Furthermore, SDS employs a windowing strategy combined with dynamic pruning to concentrate computational resources on high-probability paths, thereby enabling efficient detection of transmitted symbol sequences. Building upon SDS, SO-SDS further incorporates a state completeness verification mechanism (SCVM) to estimate bit LLRs, thus facilitating subsequent soft decoding. Numerical results show that, compared to benchmark algorithms, SDS achieves significant complexity reduction without degrading separation performance, while SO-SDS offers notable computational savings with only modest LLR accuracy loss. Notably, the computational complexity advantage of the proposed algorithms over benchmark algorithms grows substantially with increasing modulation order.

0.47

Clearing the Underbrush: AI-Enhanced RF Interference Suppression

cs.LG cs.AIeess.SP ·2026-08-25 ·Rahul Jain, Pierre Trepagnier, Rick Gentile, Joey Botero, Alexia Schulz
published similarity 0.55
Abstract · 7 pages, 10 figures, Accepted to the 2026 IEEE Military Communications Conference (MILCOM)

AI-based structured interference rejection has grown more popular because deep learning approaches can outperform traditional methods by jointly considering the signal of interest (SOI) and the signal mixture (SOI plus interference). This work builds on a previous AI-enabled approach utilizing autoregressive transformer-based models by adding a Finite Scalar Quantization (FSQ) tokenizer layer which aims to improve the interference rejection performance while keeping overall latency to a minimum. Additionally, we experiment with other inference optimization techniques with the goal of speeding up inference without much accuracy loss. We explore this space with an experiment where the SOI is a digitally modulated radio frequency (RF) signal and the structured interference is a digital television signal, an extremely common type of Orthogonal Frequency-Division Multiplexing (OFDM) transmission. Our results achieve low latency and increased interference rejection over traditional techniques and prior work with other AI-enabled methods. We demonstrate the benefits of the AI-enabled approaches via audio metrics such as Perceptual Evaluation of Speech Quality (PESQ). Additionally, we explore a variety of applications and detail how our interference rejection algorithm may be used in operationally-relevant scenarios.

0.27

Receiver-Resolution APS-PDP Maps for Wireless Channels: Benchmarking and Coarse-to-Fine Modeling

cs.AI eess.SP ·2026-11-07 ·Peilin Zheng, Haozhe Jia, Xiucheng Wang, Wenshuo Chen, Nan Cheng
benchmark similarity 0.54
Abstract · 18 pages, 6 figures

Angle Power Spectrum (APS) and Power Delay Profile (PDP) are receiver-facing spectra that govern beam selection and wideband equalization. Most ray-tracing benchmarks provide supervision as variable-size multipath component lists. This format does not match practical receivers, whose angular and delay resolutions are limited by array aperture and system bandwidth. As a result, learning targets are ambiguous and evaluations can change with reconstruction conventions. We introduce UrbanADPSMap, a benchmark that converts ray-traced supervision into fixed-grid APS and PDP targets by explicitly modeling bandwidth-limited and aperture-limited response kernels. By fixing the receiver-domain kernels, discretization, and validity mask, UrbanADPSMap removes reconstruction-induced target ambiguity and stabilizes downstream evaluation across methods. Built on this benchmark, we propose SpecFlowAR, a coarse-to-fine generator based on multi-scale autoregressive flow matching. The model first captures coarse dispersion structure and then refines beam-relevant peaks and low-power tails. The number of function evaluations controls the sampling budget, enabling latency and quality to be adjusted for dense spectrum queries. Experiments on the test set show that SpecFlowAR reduces BPL@5 to 2.03 dB under a unified NFE=80 budget, while improving beam utility and reducing errors of 3GPP dispersion statistics.

0.29