CS Paper Radar

SubRoformer: Subband Time-Domain Representation for Music Source Separation

Chunyat Wu, Chuang Ding, Paris Smaragdis, Qiuqiang Kong

eess.AS cs.SDeess.SP ·submitted 2026-11-05 14:58 UTC · v1
code/data

Abstract

Music source separation extracts vocals and instruments from a mixed recording, enabling remixing, content production, and music analysis. Existing systems commonly operate on waveforms or full-band spectrograms. Waveform inputs contain many samples even in short segments, whereas a single spectrogram resolution imposes a shared time-frequency resolution trade-off across frequency ranges. We propose SubRoFormer, a Transformer-based system comprising a subband module and a residual RoFormer module. The subband module decomposes the mixture into frequency-localized, lower-rate signals for separation. It then reconstructs the target waveforms from the estimated subbands. The residual RoFormer module models temporal and cross-band relationships on temporally compressed features. It combines this context with fine-rate features through gated residual fusion to estimate source-specific complex masks. On the MUSDB18-HQ test set, training only on MUSDB18-HQ yields an average signal-to-distortion ratio (SDR) of 10.63 dB across four stems using target-specific models, achieving state-of-the-art performance among the compared systems without extra training data. With 500 additional training songs, a single model jointly separating all four stems achieves an average SDR of 11.59 dB, establishing state-of-the-art performance among the compared single-model multi-stem systems trained with extra data. Code and checkpoints are released at https://github.com/ArchiMickey/SubRoformer.

Comment
13 pages, 4 figures, 5 tables. Submitted to IEEE/ACM Transactions on Audio, Speech, and Language Processing

Closest papers

Nearest neighbours by meaning across the whole index.

FLOMSS: Generative Music Source Separation by Flow Matching

cs.SD ·2026-10-13 ·Shuyang Cui, Zhi Zhong, Keisuke Toyama, Koichi Saito, Qiyu Wu +8 more
benchmark similarity 0.68
Abstract

Music source separation (MSS) has been conventionally addressed by discriminative methods. Recently, flow matching has emerged as a strong generative paradigm for modeling complex data distributions, with successful applications across diverse domains. These advances motivate us to systematically investigate flow matching for MSS in a four-source (Vocals, Bass, Drums, Other) setting in full-band stereo. Specifically, we investigate prediction targets, flow paths, single-source versus multi-source modeling, and mixture consistency constraints. Beyond the signal-level metrics commonly used for MSS, such as signal-to-distortion ratio, we further evaluate MSS methods using embedding-based metrics, as well as a listening test, providing a comprehensive benchmark. On MUSDB18-HQ, our proposed model exhibits competitive performance in both objective and subjective tests, highlighting the potential of flow matching for generative MSS. Demo: https://ik4sumii.github.io/FLOMSS/

0.29

Learning Where to Split: Dynamic Band Splitting for Audio Source Separation

cs.SD ·2026-10-10 ·Bingzhe Zhang, Kai Li, Xiaolin Hu
code/datacommunity pick similarity 0.67
Abstract · 25 pages, 11 figures, including appendices. Code and audio demos: https://cslikai.cn/Dynamic-Band-Splitting

Audio source separation models must preserve fine spectral structure while keeping the cost of the separator tractable. Band-split architectures reduce this cost by manually partitioning the spectrum into predefined frequency bands and encoding each band as a token, but the same boundaries are used for every mixture. Because informative spectral structure varies with source content, fixed boundaries can merge discriminative components or spend tokens where little resolution is needed. We introduce Dynamic Band Splitting (DBS), an end-to-end framework that adapts boundary locations and band widths to each mixture under a fixed band-token budget. DBS predicts content-conditioned boundary scores within frequency blocks, selects a prescribed number of boundaries using hard Top-$K$, and applies content-dependent pooling to obtain compact band tokens. After separation, it smooths and expands these tokens to the original STFT grid, refines them along frequency, and decodes complex masks with a frequency-shared head. DBS improved separation over the corresponding static models on DnR v2, MUSDB18-HQ, and EchoSet, with DBS-BSRNN achieving relative gain of 29.0% in average SI-SDR on DnR v2. These results and boundary analyses on DnR v2 show that content-adaptive frequency partitioning benefits multiple separator backbones under a fixed band-token budget. Code and audio demos are available at https://cslikai.cn/Dynamic-Band-Splitting

0.37

A Stem-Agnostic Approach to Hybrid AI Music Detection

cs.SD eess.AS ·2026-09-22 ·Richa Namballa, François Rigaud, Romain Hennequin
similarity 0.65
Abstract · 4 pages + references, 5 figures, submitted to the 2027 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP)

The inclusion of generative audio in the music production process has led to an increase in hybrid music tracks that blend authentic human performances with AI-generated stems, challenging traditional AI music detectors which operate in a binary setting. In this work, we propose a stem-agnostic framework for identifying synthetic audio sources within hybrid musical mixtures. We introduce the inspectrogram, a novel time-frequency representation that maps localized probabilities of synthetic content across the audio spectrum. By combining the inspectrogram with a Wiener filter estimating target stem energy dominance, a single CNN model evaluates whether the specific stem is generated. Trained on rendered hybrid mixtures and evaluated across various stem classes, our model achieves strong performance on high-frequency sources such as vocals, drums, and guitar, but struggles on the low-frequency, narrow-band bass. We conclude that the quality of separation impacts the detection accuracy and identify source separation as a primary bottleneck and a crucial direction for future research.

0.29

Restore, Separate, Restore: A Modular Framework for Music Source Restoration

cs.SD ·2026-10-06 ·Tobias Morocutti, Emmanouil Karystinaios, Gerhard Widmer
code/data similarity 0.65
Abstract · Code and models: https://github.com/theMoro/music_source_restoration

Music Source Restoration (MSR) seeks to recover original, unprocessed instrument stems from mixed, mastered, and possibly degraded recordings. Unlike conventional source separation, which treats the mixture as a linear sum of clean sources, MSR must additionally invert nonlinear production effects, such as equalization and compression, and transmission-related degradations, such as codec artifacts. We propose a three-stage framework built around this distinction: (1) a mixture restoration model that addresses degradation before separation, (2) a single model that separates the restored mixture into eight target stems (vocals, guitars, keyboards, synthesizers, bass, drums, percussion, and orchestra), and (3) stem-specific restoration experts fine-tuned on the separator's own residual artifacts. Each stage improves restoration quality over the previous one on the MSR Challenge test set. We release code and models to support future research in MSR at https://github.com/theMoro/music_source_restoration.

0.24

SCISSOR: Score-Conditioned Instrument Source Separation for Orchestral Recordings

cs.SD cs.AIeess.AS ·2026-09-27 ·Yiheng Lu, Hao-Wen Dong
similarity 0.64
Abstract · 5 pages, 1 figure, 3 tables. Submitted to ICASSP 2027

Orchestral separation recovers instrument sections from mixtures in which shared pitches, harmonics, and timbres obscure source identity. An aligned score provides instrument labels, note pitches, and activity times. A score-informed approach appends piano rolls to audio features before mask prediction. We introduce SCISSOR (Score-Conditioned Instrument Source Separation for Orchestral Recordings), which uses the score to form a frame-wise query for each source. Each query matches a shared audio representation, and a softmax over instrument and background slots jointly assigns overlapping time-frequency evidence. The queries retain instrument identity even when notes are missing from the score. After training on SynthSOD and a small set of URMP and PHENICX-Anechoic recordings, SCISSOR achieves the highest average SDR on held-out real recordings. With SynthSOD-only training, it leads on SynthSOD and zero-shot PHENICX-Anechoic, and improves on its audio-only control on zero-shot URMP. SCISSOR also degrades less under score corruption than the evaluated score-based baselines.

0.30

Distinguishing AI-Generated Music from Edited Audio as a Hard-Negative Robustness Task

cs.SD cs.AIcs.LG ·2026-08-14 ·Alexandru-Stefan Morosanu, Valerian Cecan, Stefan-Daniel Achirei, Laura Erhan
published similarity 0.64
Abstract · Accepted at the RobustifAI 2026 Workshop @IJCAI-ECAI 2026, Bremen

AI-generated music detectors are commonly evaluated against original songs, but real-world uploads are often remixed, re-encoded, pitch-shifted, or otherwise edited. These edited versions form a difficult negative class: they are not generated by AI, yet they may introduce spectral artifacts that resemble synthetic audio fingerprints. We study this problem as a hard-negative robustness setting for AI-generated music detection, focusing on AI-generated and edited variants derived from the same anchor songs. We compile a YouTube-based dataset of AI, edited, and original variants, using the original tracks only as references, and train a binary AI versus edited detector. Audio is processed as 10-second clips and passed as raw waveforms to a pretrained PaSST spectrogram transformer. To reduce leakage, all splits are performed by anchor song. On the held-out test set, the final video-level system achieves 0.811 balanced accuracy. At clip level, AI-generated clips reach an F1-score of 0.836, while edited clips reach a lower F1-score of 0.720. The results suggest that AI-generated music retains detectable fingerprint-like spectral cues beyond ordinary editing, but the lower edited-class F1-score shows that these cues can still overlap with artifacts from edited audio. Grad-CAM visualizations are used to inspect whether high-confidence predictions rely on localized time-frequency regions.

0.20

Singer-Informed Vocal Source Separation for Multi-Singer Music Mixtures

eess.AS cs.SD ·2026-08-14 ·Jocelyn Xu, Minje Kim
publisheddatasetcode/data similarity 0.64
Abstract · Accepted at IWAENC 2026

Music source separation systems typically extract a single vocal track and do not distinguish between multiple singers. We study singer-informed vocal source separation for multi-singer mixtures. Our framework introduces a short enrollment recording of a target singer to guide separation through a learned embedding. The singer embedding is incorporated using feature concatenation or feature-wise linear modulation (FiLM), enabling the model to focus on the target singer while suppressing interference. We construct a duet dataset based on DAMP-VSEP with quality filtering and non-overlapping enrollment segments. Experiments on solo and duet settings show that while baseline models perform well for single-singer mixtures, the proposed method improves target-singer extraction in multi-singer cases, increasing target-singer SI-SDR from 0.33 dB to 5.58 dB. Fréchet Audio Distance (FAD) further shows improved perceptual quality and better alignment with target audio distributions. Code and checkpoints are available at https://github.com/jocelynxu01/singer-separation-paper.

0.39

LiteCASS: A Lightweight End-to-End Network for Real-Time Stereo Cinematic Audio Source Separation

cs.SD ·2026-09-20 ·Yuanxin Guo, Qiang Ji, Mengmei Liu, Yuhan Lv, Ningning Pan +1 more
similarity 0.63
Abstract · 5 pages, 2 figures, 3 tables

Cinematic audio source separation (CASS) decomposes a soundtrack into dialogue, music, and sound-effects (SFX) stems. Existing CASS methods, however, suffer from two critical limitations: they rely on heavily parameterized network architectures and GPU-class hardware, limiting their use in real-time and resource-constrained scenarios, and they are overwhelmingly designed for monaural signals, leaving the stereo scenario largely unexplored. We present LiteCASS, to our knowledge the first lightweight end-to-end network for real-time stereo CASS. LiteCASS combines deterministic STFT subband rearrangement with two jointly trained compact U-Nets: the first extracts dialogue, and the second separates music and SFX from the predicted non-speech component. A multi-task waveform-domain L1 loss supervises all stems. On a spatialized stereo extension of DnR v3, LiteCASS-K8 uses only 1.06M parameters and 0.72G MACs per second, while achieving the highest averaged SI-SDR among the compared CASS baselines.

0.16