CS Paper Radar

LiteCASS: A Lightweight End-to-End Network for Real-Time Stereo Cinematic Audio Source Separation

Yuanxin Guo, Qiang Ji, Mengmei Liu, Yuhan Lv, Ningning Pan, Gongping Huang

cs.SD ·submitted 2026-09-20 08:31 UTC · v1

Abstract

Cinematic audio source separation (CASS) decomposes a soundtrack into dialogue, music, and sound-effects (SFX) stems. Existing CASS methods, however, suffer from two critical limitations: they rely on heavily parameterized network architectures and GPU-class hardware, limiting their use in real-time and resource-constrained scenarios, and they are overwhelmingly designed for monaural signals, leaving the stereo scenario largely unexplored. We present LiteCASS, to our knowledge the first lightweight end-to-end network for real-time stereo CASS. LiteCASS combines deterministic STFT subband rearrangement with two jointly trained compact U-Nets: the first extracts dialogue, and the second separates music and SFX from the predicted non-speech component. A multi-task waveform-domain L1 loss supervises all stems. On a spatialized stereo extension of DnR v3, LiteCASS-K8 uses only 1.06M parameters and 0.72G MACs per second, while achieving the highest averaged SI-SDR among the compared CASS baselines.

Comment
5 pages, 2 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Real-Time Music Source Separation on a Low-Power Audio DSP

cs.SD ·2026-09-10 ·Jianan Li, Li Liu, Ken Malsky, Gabby Yi
unusual similarity 0.68
Abstract · 5 pages, 3 figures, 2 tables. Submitted to ICASSP 2027

Real-time music source separation is validated on desktop CPUs and GPUs. Does any published system fit the embedded audio hardware it targets? On a commercial audio DSP (2 MB SRAM, 2.07 GMAC/s measured), none does, and the constraints eliminate different models: memory rules out the 16-51 M parameter TasNet/X-UMX family, per-frame compute rules out RT-STT, needing 5.5x the available MAC rate. Parameter count predicts neither: weight reuse spans 1x to 345x. We then build one that fits. Training on continuous rather than block-padded convolution context proves essential: a model scoring 3.93 dB block-wise otherwise collapses to silence within 2 s frame-by-frame. A gated complex FIR deep filter adds a latency knob, gaining 0.38 dB even when strictly causal. It reaches 4.70 dB cSDR on MUSDB18-HQ and runs in 10.43 ms of an 11.6 ms hop, 0.5-0.7 dB behind systems that do not fit.

0.35

Efficient Streaming Audio-Visual Target Speaker Extraction for Real-World Acoustic Scenes

cs.SD ·2026-10-23 ·Wendi Sang, Kai Li, Yifan Li, Jianqiang Huang, Xiaolin Hu
benchmarkcode/datacommunity pick similarity 0.67
Abstract · 28 pages

Streaming audio-visual target speaker extraction (AVTSE) is essential for latency-sensitive applications. However, current causal systems face two coupled gaps. First, standard benchmarks fix the number of speakers at two and ignore the near-/far-field interference, reverberation, and sudden noise of real scenes. Second, high-performance causal architectures are too heavy for edge deployment. Lightweight alternatives try to reclaim capacity by repeatedly invoking a small separator, which offsets the savings. To address the first gap, we release RealSSA, a realistic AVTSE benchmark consisting of RealSSA-Sim and RealSSA-Real. RealSSA-Sim provides controllable simulated scenes with 1--5 dynamic near-field interfering speakers; scenes with far-field interference additionally include 10--15 far-field interfering speakers. RealSSA-Real provides a held-out real-recorded evaluation set. To address the second gap, we propose Falcon, a causal AVTSE method. Its Separator performs multi-scale time-frequency separation in a single encoder--decoder pass. We train Falcon with an encoder-space speaker contrastive loss. This loss suppresses near-field leakage at zero inference cost and transfers across backbones. Falcon achieves state-of-the-art extraction quality on RealSSA-Sim, LRS2-2Mix, LRS3-2Mix, and VoxCeleb2-2Mix. Compared with the causal AV-TFGridNet baseline, it cuts parameters by 91.9%, computation by 20.2 times, and GPU inference latency by 11.1 times. Code and demo are available at https://cslikai.cn/Falcon/.

0.36

Adapting offline models to a streaming context for music source separation

eess.SP ·2026-09-28 ·Dylan Sechet, Marc Evrard, Matthieu Kowalski
similarity 0.66
Abstract

Real-time music source separation must satisfy two constraints: a bound on algorithmic latency and a bound on computational cost. Offline separators are usually omitted from real-time comparisons or credited with a latency equal to their full input length. We show that this latency is set by where the output is read, not by the length of the separator's input. An unmodified offline model can therefore run in a streaming setting, without retraining. At each step, the input slides by one STFT hop, and one output hop is read out. The resulting latency can be as low as one STFT hop (23 ms), and the computational cost does not increase as latency shrinks. We identify a theoretical model-dependent latency boundary below which separation quality should drop steeply, and confirm this experimentally across three architectures. At equal algorithmic latency, streamed off-the-shelf checkpoints for HT-Demucs and SCNet match the published results of dedicated real-time models in terms of separation quality. Streamed models remain far less computationally efficient: only HT-Demucs runs faster than real time on a GPU.

0.15

SepGen: Multi-Stem Audio-Video Separation and Generation in a Single Model

cs.SD cs.CV ·2026-10-08 ·Aviad Dahan, Rajaei Khatib, Yonatan Bitton, Idan Szpektor, Lior Wolf +1 more
code/data similarity 0.65
Abstract · 24 pages, 8 figures, 18 tables. Project page: https://sepgen.github.io/

A 4D audio-visual scene comprises a video, the dynamic geometry it depicts, and the sound sources that populate it, each with its own position and trajectory. Rendering such a scene from a novel viewpoint requires that every source be available as an individual waveform, so that it can be localized in the scene and propagated to the observer before the signals are mixed. Joint audio-video generators can synthesize the video and its soundtrack, but the soundtrack is emitted as a single audio-mix in which the sources are not individually accessible. We present SepGen, which extends a pretrained audio-video generator to emit the video, the mixed soundtrack, and one waveform per captioned source in one joint sampling run. SepGen supports two complementary modes: generation and separation. In generation mode, each source caption specifies what its stem contains. A two-speaker dialogue, for example, comes out as one stem per speaker in the original turn order. In separation mode, the input audio-mix remains clean while the captions specify what to extract, so the model can decompose a recording from a free-text description. We evaluate generation on scenes synthesized from text, and separation on scenes rendered by other generators and on real recordings of speech, music, and sound effects. Given an audio-mix and captions that carry the spoken lines, SepGen outperforms language-conditioned separators, most clearly on speech, and it keeps the lead when the lines are removed from the captions. Code, checkpoints, and datasets are available at https://sepgen.github.io/

0.28

DAMSEP: Distance-Aware Monaural Source Separation using Multi-RIR Estimation

eess.AS ·2026-09-24 ·Wen Wen, Qiang Zhou, Yu Xi, Haoyu Li, Bohan Li +1 more
code/datahot direction similarity 0.64
Abstract · 5 pages, 1 figure, 5 tables. Submitted to ICASSP 2027. Comments updated; manuscript unchanged

Although room impulse responses (RIRs) encode source-distance cues, conventional monaural source separation focuses on recovering audio content without estimating source-specific RIRs, losing the associated spatial information. To address this limitation, we propose Distance-Aware Monaural Source Separation using Multi-RIR Estimation (DAMSEP), the first end-to-end framework that is jointly trained for source separation and multi-source RIR estimation from a single-microphone mixture. DAMSEP integrates a separation backbone with shared dereverberation and RIR estimation modules to jointly recover clean sources and source-specific complex convolutive transfer functions under source estimation and reverberant reconstruction objectives, enabling relative near/far ordering through the direct-to-reverberant ratios of the corresponding RIRs. For comprehensive evaluation, we introduce HETMIXR, which spans heterogeneous source content and diverse simulated room conditions with source-specific RIRs and geometric distance annotations. Experiments on HETMIXR demonstrate superior performance in source separation, RIR estimation, and distance ordering. Ablation studies reveal the complementary benefits of source supervision and reverberant reconstruction, while additional evaluations show generalization to single-speaker inputs and mixtures generated using measured RIRs from an unseen room. Our code and dataset are available at https://github.com/Wenanzhi/DAMSEP.

0.49

Learning Where to Split: Dynamic Band Splitting for Audio Source Separation

cs.SD ·2026-10-10 ·Bingzhe Zhang, Kai Li, Xiaolin Hu
code/datacommunity pick similarity 0.64
Abstract · 25 pages, 11 figures, including appendices. Code and audio demos: https://cslikai.cn/Dynamic-Band-Splitting

Audio source separation models must preserve fine spectral structure while keeping the cost of the separator tractable. Band-split architectures reduce this cost by manually partitioning the spectrum into predefined frequency bands and encoding each band as a token, but the same boundaries are used for every mixture. Because informative spectral structure varies with source content, fixed boundaries can merge discriminative components or spend tokens where little resolution is needed. We introduce Dynamic Band Splitting (DBS), an end-to-end framework that adapts boundary locations and band widths to each mixture under a fixed band-token budget. DBS predicts content-conditioned boundary scores within frequency blocks, selects a prescribed number of boundaries using hard Top-$K$, and applies content-dependent pooling to obtain compact band tokens. After separation, it smooths and expands these tokens to the original STFT grid, refines them along frequency, and decodes complex masks with a frequency-shared head. DBS improved separation over the corresponding static models on DnR v2, MUSDB18-HQ, and EchoSet, with DBS-BSRNN achieving relative gain of 29.0% in average SI-SDR on DnR v2. These results and boundary analyses on DnR v2 show that content-adaptive frequency partitioning benefits multiple separator backbones under a fixed band-token budget. Code and audio demos are available at https://cslikai.cn/Dynamic-Band-Splitting

0.37

BridgeCodec: Mamba Enhanced Neural Audio Codec with Schrödinger Bridge at Low Bitrate

cs.SD cs.AIcs.LGeess.AS ·2026-10-11 ·Zijian Lin, Jing Yang, Jinghao Luo, Zhuo Wang, Fan Fan +1 more
top venue similarity 0.64
Abstract · Accepted by Interspeech 2026

Neural audio codecs achieve remarkable performance but operate as closed ecosystems with rigidly co-trained encoderdecoder pairs, severely hindering interoperability. To resolve this, we propose BridgeCodec, a versatile framework that decouples these pairs by translating latent representations between mismatched, frozen endpoints. We formulate this cross-codec translation as a Schrödinger Bridge optimal transport problem, enabling robust mapping between disparate distributions without predefined noise priors. To efficiently capture longrange speech temporal dependencies, we integrate a Mambaenhanced U-Net architecture. We validate BridgeCodec on an extreme deployment scenario: mapping a lightweight 8 kHz source encoder directly to a 48 kHz target decoder at an ultralow bitrate of 1 kbps. Experimental results demonstrate that BridgeCodec achieves superior wideband reconstruction and high perceptual quality, successfully bridging heavily bottlenecked, heterogeneous codecs.

0.29

WorldSonus: Bringing Sound to Worlds

cs.SD cs.AIcs.CVeess.AS ·2026-10-06 ·Pengjun Fang, Jingyi Fa, Kam Man Wu, Jiaming Wang, Haoyuan Huang +7 more
code/data similarity 0.64
Abstract · 25 pages, 4 figures, 16 tables. Project page: https://noizai.github.io/WorldSonus/

Recent advances in world models have enabled increasingly realistic visual synthesis. However, these generated environments remain largely silent. Bringing sound to world models poses three core challenges: real-time generation to keep pace with interactive video streams, interactive control to respond to mid-stream sound instructions, and spatially aligned stereo to reflect scene geometry and camera motion. To address these demands, we introduce WorldSonus, an interactive video-to-audio framework designed for real-time spatial sound synthesis in world models. For real-time generation, WorldSonus employs a streaming causal autoregressive diffusion architecture that synthesizes audio chunks at a low real-time factor (RTF) of 0.41. For interactive control, we incorporate an audio-centric captioning pipeline with chunk-indexed prompt scheduling, enabling dynamic manipulation of sound events during generation. For spatial alignment, we leverage high-quality stereo supervision curated from diverse stereo and ambisonic data. Extensive experiments demonstrate that while tailored for world models, WorldSonus generalizes effectively to open-domain video-to-audio benchmarks, matching or outperforming state-of-the-art bidirectional models in both acoustic quality and spatial alignment. Project page: https://noizai.github.io/WorldSonus/

0.53