CS Paper Radar

SFPF: Spatio-Frequency Polarization Fingerprint for Anomalous Wireless Device Detection

Xiaoxuan Huang, Jinlong Xu, Daoyuan Shen, Meng Zhang, Dong Wei

cs.CR ·submitted 2026-09-18 15:00 UTC · v1

Abstract

Periodic inspection of deployed wireless devices is necessary because unauthorized hardware replacement may preserve communication functions, credentials, and logical identity, making anomalous devices difficult to detect. Such inspections are conducted under controlled measurement conditions to verify that each device remains consistent with its enrolled hardware state. Conventional radio-frequency fingerprint (RFF) may provide insufficient separation when replacement hardware closely resembles legitimate hardware, while a polarization fingerprint (PF) constructed at one observation direction may miss spatially nonuniform polarization changes. This paper proposes the spatio-frequency polarization fingerprint (SFPF), which jointly represents complex polarization responses over multiple frequencies and observation directions; conventional PF is its fixed-direction slice. We derive SFPF formation from hardware-dependent modal excitation, directional far-field radiation, and polarization projection. A first-order sensitivity analysis shows that the response to the same hardware change varies with both frequency and direction, motivating joint spatio-frequency acquisition. Electromagnetic simulations confirm the nonuniform spatio-frequency sensitivity and show that, under the same observation budget, SFPF improves normalized distance, Fisher score, and the inter-/intra-class ratio over PF by 17.7%, 45.8%, and 11.3%, respectively. Experiments show that SFPF consistently outperforms RFF and PF over 0--20~dB. At 15--20~dB, SFPF achieves anomalous-device F1 scores of 87.3--90.4% and AUROC values of 85.4--95.5%.

Closest papers

Nearest neighbours by meaning across the whole index.

FreqSpaNet: Frequency and Spatial Learning of SFPF for Physical Layer Hardware Integrity Detection

cs.LG ·2026-09-15 ·Xiaoxuan Huang, Jinlong Xu, YiZhe Wang, Meng Zhang, Xian Li +1 more
similarity 0.67
Abstract · 5 pages, 6 figures

Unauthorized hardware replacement can preserve a wireless device's logical identity while altering its physical implementation, posing a challenge to hardware integrity verification. Spatio-frequency polarization fingerprints (SFPFs) capture device-dependent responses across multiple frequencies and directions, but their frequency and spatial dimensions exhibit different structural dependencies. We propose FreqSpaNet, an SFPF representation learning network for open set hardware anomaly detection. A frequency branch captures local variations among neighboring frequencies, while a geometry-aware spatial branch models directional relationships using angular information. The two representations are combined through adaptive fusion, and complementary pretraining further captures shared information while preserving the distinct characteristics of the frequency and spatial representations. Experiments show that FreqSpaNet achieves a mean AUROC of 96.31\%, 9.05 points above the baseline. Results under seven hardware replacement scenarios further verify the effectiveness of FreqSpaNet.

0.32

Supervised Device Charting with CSI Measurements from Commercial 5G NR User Equipments

eess.SP cs.IT ·2026-09-21 ·Mischa Vasylyev, Frederik Zumegen, Reinhard Wiesmayr, Christoph Studer
similarity 0.57
Abstract · This work has been submitted to the 2027 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP)

Radio frequency fingerprint identification (RFFI) is a promising approach to distinguish physical wireless devices using hardware-induced signal imperfections. Conventional RFFI methods only provide discrete device labels and no human-interpretable representation of the relations among received signals. We propose supervised device charting, which maps location-insensitive channel-state information (CSI) fingerprints to a low-dimensional chart that visualizes cluster compactness, overlap, and outliers. We evaluate the method with real-world 5G New Radio (5G NR) measurements from six commercial smartphones and introduce the neighbor label error rate (NLER) to quantify class-separation accuracy. Our results demonstrate that two- and three-dimensional device charts provide an interpretable visualization of the learned RFFI representation. For three-dimensional device charts, the NLER is 0.22% for same-day measurements and 7.38% for measurements from the next day. The device charts reveal a cross-day distribution shift and map the held-out device close to the known device of the same model. Increasing the device chart dimensions further improves cluster separation at the expense of interpretability.

0.21

What Does an RF Fingerprint Identify? A Cross-Corpus Evaluation of Hardware-Family-Associated and Unit-Level Signal

cs.CR cs.LG ·2026-11-10 ·Hyojung Han
benchmark similarity 0.57
Abstract · 20 pages, 4 tables, no figures

RF fingerprinting benchmarks report how well a classifier separates transmitters, not whether that separability reflects the individual unit or its hardware family. We compare a benchmark's real hardware grouping with size-matched random groupings of the same devices, using calibrated, unclipped variational lower bounds under label-blind, device-level cross-fitting on devices never seen in training. On WiSig (OFDM Wi-Fi), the generation grouping exceeded all 999 matched random groupings (permutation p = 0.001, the resolution floor), although no grouping attained a positive certified bound, and the direction survives removing channel equalization. A preregistered replication on a LoRa corpus (chirp spread spectrum, three hardware models), with a front-end frozen on synthetic data, again exceeded all 999 (p = 0.001), and two sensitivity analyses judged by a reversal rule fixed in advance did not reverse the direction. This is a directional replication only: the excess magnitude reflects a miscalibrated null, the chain-rule decomposition leaves a residual of +0.296 bits, and capture order is undocumented. In a same-model corpus of 122 ESP32 radios, a temperature-calibrated held-out bound of +3.338 bits (label entropy 6.931 bits) indicates substantial device-specific identity, not separable from per-device capture-session effects; relying on the calibrated bound was decided after the uncalibrated bound changed sign. On synthetic transmitters a high-capacity convolutional decoder reaches 98.5% of a known 6-bit ceiling, and the audit protocol leaves chain-rule residuals of +0.072 bits (synthetic, fixed physical features) and +0.060 bits (WiSig, audit features). Two further corpora were excluded by preregistered ingest gates. Across WiSig and LoRa, hardware-family groupings consistently produced stronger identity-associated signal than size-matched random groupings.

0.38

Interpretable Feature Learning for RF Fingerprinting via Polar MKANs

eess.SP cs.LG ·2026-08-20 ·Mikhail Krasnov, Ljupcho Milosheski, Carolina Fortuna
benchmark similarity 0.56
Abstract · 5 pages, 5 figures, 3 tables

Radio frequency (RF) fingerprinting authenticates wireless devices from hardware-induced I/Q impairments, typically with deep learning feature extractors that are accurate but opaque, limiting their use in security critical settings. We propose Polar Monotonic Kolmogorov-Arnold Networks (Polar MKAN), a block partitioned monotonic encoder on polar inputs in which each latent dimension depends exclusively on magnitude or phase, yielding channel separation and monotone responses by construction. On a synthetic gain and carrier frequency offset (CFO) benchmark, Polar MKAN reaches 57.2 percent DCI Disentanglement versus at most 12.9 percent for unpartitioned baselines. We further evaluate the detection accuracy trade off on real data and the sensitivity to blind CFO compensation.

0.36

From Identification to Authentication for Micro-CSI RF Fingerprinting in OFDM Systems

eess.SP ·2026-08-30 ·Matteo Varotto, Stefano Tomasin
similarity 0.54
Abstract

We consider a scenario where a legitimate user (Alice) authenticates itself to an authenticator (Bob) by transmitting orthogonal frequency division multiplexing (OFDM) pilots, from which the authenticator extracts the Micro-CSI (M-CSI) fingerprint and compares it against a stored reference via a likelihood test (LT)-based test. We introduce a new spoofing attack, where two adversarial devices collude to first jointly estimate the M-CSI fingerprints of Alice and Bob and then construct a forged signal able to break the authentication mechanism with high probability, limited only by noise effects on the estimates. We derive approximate closed-form distributions of the authentication test statistic under both the legitimate and spoofing hypotheses, enabling the derivation of false alarm and misdetection probabilities in closed-form. We then validate our analytical results against M-CSI fingerprints extracted from experimental data. The results reveal that, given sufficient pilot observations or an equivalent noise statistic between Bob and the attackers, the latter can always drive the test statistics to a random classifier, vanishing the security of M-CSI-based authentication.

0.25

Physical-Layer Fingerprint-Space Capacity Analysis for 100BASE-TX Devices in IIoT

cs.CR eess.SP ·2026-08-27 ·Chenming Zhang, Aiqun Hu
unusual similarity 0.51
Abstract · 12 pages, 7 figures, 5 tables. Submitted to IEEE Internet of Things Journal

Industrial Internet of Things (IIoT) networks widely adopt Ethernet technologies, such as 100BASE-TX, for industrial communications. As industrial networks continue to scale, reliable device authentication becomes increasingly important for preventing device impersonation and unauthorized access. Physical-layer fingerprinting (PLF) exploits device-dependent fingerprint features in transmitted signals and provides a hardware-based approach for terminal authentication. However, the distinguishable space supported by 100BASE-TX physical-layer fingerprints and its capacity boundary remain largely unexplored. To analyze the capacity of physical-layer fingerprints, this paper proposes a nonlinear and impulse-response model (NAIM) that characterizes device-dependent waveform differences in 100BASE-TX transmitted waveforms. The nonlinear component captures steady-state level deviations, while the impulse-response component describes the transition response during level transitions. The 100BASE-TX transmitter waveform requirements, the observation resolution determined by noise and analog-to-digital conversion (ADC) quantization, and the target bit-error ratio (BER) constrain the admissible fingerprint space. Under the NAIM model, the fingerprint-space capacity of 100BASE-TX terminals is derived as approximately $2.96\times10^{10}$ distinguishable states. Experiments on signals collected from 48 NICs under two cable conditions estimate a Gaussian-equivalent empirical capacity from the measured inter-device and within-device variations. Under the 5-m cable condition, empirical capacity and closed-set identification consistently rank the three NIC models, and a larger empirical capacity yields higher identification accuracy. These results demonstrate that the proposed capacity analysis provides a pre-deployment assessment for physical-layer fingerprinting in IIoT.

0.50

Pluggable Subband-Decoupled Fusion and Unlabeled Capture Prototype Calibration: Bridging High-SNR Null-Subcarrier Regrowth and Low-SNR Coherent Preambles for Cross-Domain IoT RF Fingerprinting

cs.AI cs.ITeess.ASeess.SP ·2026-11-17 ·Fengchong Yao, Jianbing Li, Qing Liu, Kefeng Song, Haitao Li +2 more
benchmark similarity 0.50
Abstract

Zero-overhead physical-layer authentication at edge wireless access points (APs) is vital for securing resource-constrained Internet of Things (IoT) transceivers against credential cloning, yet cross-domain IEEE 802.11a/g radio frequency fingerprint identification (RFFI) faces an acute signal-to-noise ratio (SNR) crossover. Power-amplifier spectral regrowth on unpopulated null subcarriers resists indoor multipath at high SNR but decays quadratically below the thermal noise floor, whereas populated active in-band preambles survive low SNR yet degrade under severe multipath, causing static fusion to lose up to 44.7 percentage points (pp). To our knowledge, we propose the first RFFI framework that dynamically modulates active in-band waveforms and unpopulated null-subcarrier regrowth via a blind physical SNR gate: Pluggable Gated Subband-Decoupled Fusion with Unlabeled Capture-Aware Prototype Calibration (GSDF-CAPC). Avoiding the 20-35 dB subband gradient imbalance of joint training, GSDF pairs any frozen pretrained host backbone with a 46.3K null-subcarrier plug-in encoder (NS-Branch), fusing scale-standardized logits and gate-warped spherical embeddings under a source-calibrated lag-64 thermal-SNR gate with exact low-SNR fallback. Over unlabeled target AP captures, forward-only unbalanced optimal-transport calibration (UOT-CAPC) aligns shifted prototypes under packet-arrival skew and recovers parameter-free balanced Sinkhorn (U-CAPC) at equipartition. Across DataPort-WiFi, WiSig, and ORBIT MobRFFI, zero-retrain GSDF wins all 72/72 paired runs across eight backbones with 0.00 pp low-SNR loss, while edge IB-Host + GSDF (92.6K-93.3K active parameters, 1.82 ms single-core CPU latency) and timing-synchronized GSDF-STO / GSDF-Tri reach 57.50%-65.05% three-benchmark Macro-F1 (89.04%-100.00% over 5-10-packet IoT bursts).

0.27

A New Hope for PRNU on Modern Smartphones? Evidence That Device-Specific Fingerprints Survive Computational Photography

cs.CV eess.IV ·2026-10-18 ·Benjamin Loison, Quentin Bammey, Thibaud Ehret, Rafael Grompone von Gioi, Pablo Musé +1 more
unusual similarity 0.49
Abstract

Photo Response Non-Uniformity (PRNU) is widely regarded as the most reliable marker for source camera identification. Recent studies, however, report high correlations between images and fingerprints from different modern smartphones, which calls into question the discriminative power of PRNU on these devices. Using 30 recent smartphones under controlled acquisition conditions (e.g., no digital zoom), we investigate whether the fingerprint itself is at fault or the way it is compared. We find that a component shared by all fingerprints of the same model inflates the standard signed peak-to-correlation energy (sPCE). To counter this, we propose $Δ$sPCE: the sPCE between a query image and a candidate camera's fingerprint, minus the mean sPCE between that image and the fingerprints of the remaining candidates, in the spirit of T-norm score normalization. $Δ$sPCE improves attribution accuracy, suggesting that the device-specific PRNU signal is still present. Although the limited dataset size and the dependence of $Δ$sPCE on the candidate camera set currently restrict operational applicability, these results suggest that PRNU-based attribution of modern smartphones remains feasible when fingerprints are compared appropriately.

0.22