CS Paper Radar

FreqSpaNet: Frequency and Spatial Learning of SFPF for Physical Layer Hardware Integrity Detection

Xiaoxuan Huang, Jinlong Xu, YiZhe Wang, Meng Zhang, Xian Li, Yuying Bian

cs.LG ·submitted 2026-09-15 17:32 UTC · v1

Abstract

Unauthorized hardware replacement can preserve a wireless device's logical identity while altering its physical implementation, posing a challenge to hardware integrity verification. Spatio-frequency polarization fingerprints (SFPFs) capture device-dependent responses across multiple frequencies and directions, but their frequency and spatial dimensions exhibit different structural dependencies. We propose FreqSpaNet, an SFPF representation learning network for open set hardware anomaly detection. A frequency branch captures local variations among neighboring frequencies, while a geometry-aware spatial branch models directional relationships using angular information. The two representations are combined through adaptive fusion, and complementary pretraining further captures shared information while preserving the distinct characteristics of the frequency and spatial representations. Experiments show that FreqSpaNet achieves a mean AUROC of 96.31\%, 9.05 points above the baseline. Results under seven hardware replacement scenarios further verify the effectiveness of FreqSpaNet.

Comment
5 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

SFPF: Spatio-Frequency Polarization Fingerprint for Anomalous Wireless Device Detection

cs.CR ·2026-09-18 ·Xiaoxuan Huang, Jinlong Xu, Daoyuan Shen, Meng Zhang, Dong Wei
similarity 0.67
Abstract

Periodic inspection of deployed wireless devices is necessary because unauthorized hardware replacement may preserve communication functions, credentials, and logical identity, making anomalous devices difficult to detect. Such inspections are conducted under controlled measurement conditions to verify that each device remains consistent with its enrolled hardware state. Conventional radio-frequency fingerprint (RFF) may provide insufficient separation when replacement hardware closely resembles legitimate hardware, while a polarization fingerprint (PF) constructed at one observation direction may miss spatially nonuniform polarization changes. This paper proposes the spatio-frequency polarization fingerprint (SFPF), which jointly represents complex polarization responses over multiple frequencies and observation directions; conventional PF is its fixed-direction slice. We derive SFPF formation from hardware-dependent modal excitation, directional far-field radiation, and polarization projection. A first-order sensitivity analysis shows that the response to the same hardware change varies with both frequency and direction, motivating joint spatio-frequency acquisition. Electromagnetic simulations confirm the nonuniform spatio-frequency sensitivity and show that, under the same observation budget, SFPF improves normalized distance, Fisher score, and the inter-/intra-class ratio over PF by 17.7%, 45.8%, and 11.3%, respectively. Experiments show that SFPF consistently outperforms RFF and PF over 0--20~dB. At 15--20~dB, SFPF achieves anomalous-device F1 scores of 87.3--90.4% and AUROC values of 85.4--95.5%.

0.29

Interpretable Feature Learning for RF Fingerprinting via Polar MKANs

eess.SP cs.LG ·2026-08-20 ·Mikhail Krasnov, Ljupcho Milosheski, Carolina Fortuna
benchmark similarity 0.60
Abstract · 5 pages, 5 figures, 3 tables

Radio frequency (RF) fingerprinting authenticates wireless devices from hardware-induced I/Q impairments, typically with deep learning feature extractors that are accurate but opaque, limiting their use in security critical settings. We propose Polar Monotonic Kolmogorov-Arnold Networks (Polar MKAN), a block partitioned monotonic encoder on polar inputs in which each latent dimension depends exclusively on magnitude or phase, yielding channel separation and monotone responses by construction. On a synthetic gain and carrier frequency offset (CFO) benchmark, Polar MKAN reaches 57.2 percent DCI Disentanglement versus at most 12.9 percent for unpartitioned baselines. We further evaluate the detection accuracy trade off on real data and the sensitivity to blind CFO compensation.

0.36

FedSwitch: Federated Region Classification From Wireless Channel Measurements

eess.SP ·2026-10-02 ·Mattia Piana, Stefano Rini, Stefano Tomasin
similarity 0.59
Abstract

Wireless Internet-of-Things (IoT) networks can leverage locally observed channel state information (CSI) at base-stations (BSs) to perform region classification, i.e., infer the region of origin of a transmitter (TX), thereby enabling channel-based authentication. However, centralizing these measurements incurs substantial communication overhead and requires sharing location-dependent radio fingerprints. To address these difficulties, we propose an edge-native federated learning (FL) framework where BSs collaboratively train a shared classifier via a parameter server (PS) without exposing raw data, thereby supporting physical-layer security tasks like spoofing detection. To overcome the statistical heterogeneity arising from diverse BS locations and propagation conditions, we introduce FedSwitch, a personalized FL algorithm that automatically transitions edge nodes from collaborative training to local fine-tuning upon loss stagnation. We provide theoretical convergence guarantees for the proposed collaborative training phase and derive analytical bounds linking classification errors to statistical discrepancies. Extensive evaluations on synthetic channel measurements demonstrate that FedSwitch significantly improves region-classification accuracy over standard FL baselines.

0.17

From Identification to Discovery: Holistic RF Fingerprinting via Learning-Aided Quantization

eess.SP ·2026-10-05 ·Omer Hazan, Gil Paryanti, Nir Shlezinger
similarity 0.58
Abstract · Under review for publication in the IEEE

Radio frequency fingerprint identification (RFFI) enables device identification and authentication by exploiting transmitter-specific hardware impairments embedded in received RF signals. Existing RFFI methods are typically designed for a specific operating regime, such as closed-set identification, open-set recognition (OSR), or discovery of new devices, and often treat these tasks as separate algorithmic components. In this paper, we propose a holistic RFFI framework that jointly supports closed-set identification, OSR, and novel class discovery (NCD) within a single expandable architecture. The proposed method formulates RFFI as vector quantization in a learned latent feature space, where registered devices are represented by labeled codewords. This representation enables closed-set identification through codeword assignment, OSR through uncertainty measures induced by the codebook geometry, and NCD by using the latent representations and open-set uncertainty of rejected samples to organize them into new device identities. We further develop a multi-stage training procedure that combines supervised representation learning, latent-space refinement, codebook initialization, and vector-quantization-aware optimization. Experimental results on LoRa and WiFi RFFI datasets demonstrate that the proposed framework achieves accurate identification of registered devices, reliable detection of unseen transmitters, and effective discovery and registration of new device classes, highlighting the benefits of coupling the different RFFI tasks.

0.16

Hardware-Rooted PUF Fingerprinting for Device-Level Traceability in Knowledge Distillation

cs.CR ·2026-09-25 ·Ning Lyu, Yuntao Liu, Yonghong Bai, Zhiyuan Yan
similarity 0.57
Abstract

Knowledge distillation (KD) enables model transfer across heterogeneous platforms and deployment environments, yet it exposes proprietary models to distillation-based theft, where an adversary extracts intellectual property (IP) by training a student model on teacher outputs. Current defenses, such as software watermarking or hardware-based access control, either fail to survive the distillation process or lack the granularity to identify the specific device responsible for a leak. Aiming to provide post-theft accountability and traceability, we propose a novel fingerprinting framework that superimposes device-specific Physical Unclonable Function (PUF) signatures onto teacher logits during distillation. By utilizing signatures derived from Ring Oscillator (RO) PUFs measured on a Xilinx Zynq-7020 FPGA, we ensure that any student model trained via KD inherits a unique, hardware-linked identity. Our framework is architecture-agnostic, enabling reliable identity inheritance across heterogeneous structures, including Convolutional Neural Networks, Vision Transformers, and encoders. To ensure robust attribution, we implement a two-stage recovery pipeline consisting of a neural decoder and Hamming-distance refinement, maintaining high detection accuracy even under noisy conditions. Furthermore, we introduce a multi-level logit encoding scheme to support large-scale device deployment. Experimental results demonstrate that the embedded fingerprints are resilient against common post-distillation modifications. These results establish a practical system-level approach for enabling hardware-linked model traceability in distributed AI deployment environments.

0.25

C$^2$T-OpenMax: A Novel Open-Set WiFi RF Fingerprinting Method via Center Constrained Learning and Confidence-Guided Tail Modeling

cs.CR ·2026-09-02 ·Yuanyu Zhang, Junjie Yang, Ji He, Shuangrui Zhao, Lele Zheng +1 more
similarity 0.56
Abstract

Radio frequency fingerprinting (RFF) enables device authentication from transmitter-specific hardware imperfections, but practical deployment requires cross-environment open-set recognition. Data augmentation improves environmental generalization, yet may yield dispersed, low-confidence known-class representations that distort the class statistics used by OpenMax. To address this problem, we propose C$^2$T-OpenMax, an enhanced OpenMax framework combining center-constrained learning with confidence-guided tail modeling. The former improves intra-class compactness, making class-wise representations more suitable for distance-based modeling. The latter retains only correctly classified, high-confidence logits for mean activation vector estimation and Weibull fitting, reducing bias from ambiguous boundary samples. Together, the two modules refine representation geometry and OpenMax construction while preserving augmentation benefits. Experiments on a public WiFi CSI dataset show that C$^2$T-OpenMax achieves the highest open-set accuracy in seven of eight location groups and outperforms all baselines in area under the receiver operating characteristic curve (AUROC) and open-set classification rate (OSCR) across every tested openness level. Under the largest-openness setting, it improves accuracy by 12.31%, AUROC by 0.0887, and OSCR by 0.0856 over the augmented OpenMax baseline.

0.26

Supervised Device Charting with CSI Measurements from Commercial 5G NR User Equipments

eess.SP cs.IT ·2026-09-21 ·Mischa Vasylyev, Frederik Zumegen, Reinhard Wiesmayr, Christoph Studer
similarity 0.56
Abstract · This work has been submitted to the 2027 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP)

Radio frequency fingerprint identification (RFFI) is a promising approach to distinguish physical wireless devices using hardware-induced signal imperfections. Conventional RFFI methods only provide discrete device labels and no human-interpretable representation of the relations among received signals. We propose supervised device charting, which maps location-insensitive channel-state information (CSI) fingerprints to a low-dimensional chart that visualizes cluster compactness, overlap, and outliers. We evaluate the method with real-world 5G New Radio (5G NR) measurements from six commercial smartphones and introduce the neighbor label error rate (NLER) to quantify class-separation accuracy. Our results demonstrate that two- and three-dimensional device charts provide an interpretable visualization of the learned RFFI representation. For three-dimensional device charts, the NLER is 0.22% for same-day measurements and 7.38% for measurements from the next day. The device charts reveal a cross-day distribution shift and map the held-out device close to the known device of the same model. Increasing the device chart dimensions further improves cluster separation at the expense of interpretability.

0.21

PCB-MC: Missing Component Analysis in Printed Circuit Boards

cs.CV ·2026-09-30 ·Betsy Villa Brochero, Ian Gibson, Estefania Talavera
benchmarkdataset similarity 0.55
Abstract · Preprint

Detecting missing components on printed circuit boards (PCBs) differs fundamentally from conventional object detection, as the model must localize components that are not present. We introduce PCB-MC, a curated dataset for missing component detection with footprint level annotations built on top of the RF100 dataset. The dataset contains 197 distinct board types, each corresponding to a unique PCB design, with multiple augmented samples per type. We also provide benchmark results on PCB-MC by evaluating a diverse set of supervised and unsupervised methods. To ensure fair evaluation, we propose board type aware cross validation splits that prevent layout leakage between training and test sets. Supervised models showcase high false negative rates on unseen board designs, and unsupervised anomaly detection methods fail entirely due to the lack of spatial alignment with a board specific reference. These results confirm that missing component detection on diverse PCB layouts remains an open challenge. We release PCB-MC and all training protocols to support reproducible research on structural absence detection in industrial inspection.

0.22