CS Paper Radar

Pluggable Subband-Decoupled Fusion and Unlabeled Capture Prototype Calibration: Bridging High-SNR Null-Subcarrier Regrowth and Low-SNR Coherent Preambles for Cross-Domain IoT RF Fingerprinting

Fengchong Yao, Jianbing Li, Qing Liu, Kefeng Song, Haitao Li, Song Wang, Kunpeng Wang

cs.AI cs.ITeess.ASeess.SP ·submitted 2026-11-17 14:02 UTC · v1
benchmark

Abstract

Zero-overhead physical-layer authentication at edge wireless access points (APs) is vital for securing resource-constrained Internet of Things (IoT) transceivers against credential cloning, yet cross-domain IEEE 802.11a/g radio frequency fingerprint identification (RFFI) faces an acute signal-to-noise ratio (SNR) crossover. Power-amplifier spectral regrowth on unpopulated null subcarriers resists indoor multipath at high SNR but decays quadratically below the thermal noise floor, whereas populated active in-band preambles survive low SNR yet degrade under severe multipath, causing static fusion to lose up to 44.7 percentage points (pp). To our knowledge, we propose the first RFFI framework that dynamically modulates active in-band waveforms and unpopulated null-subcarrier regrowth via a blind physical SNR gate: Pluggable Gated Subband-Decoupled Fusion with Unlabeled Capture-Aware Prototype Calibration (GSDF-CAPC). Avoiding the 20-35 dB subband gradient imbalance of joint training, GSDF pairs any frozen pretrained host backbone with a 46.3K null-subcarrier plug-in encoder (NS-Branch), fusing scale-standardized logits and gate-warped spherical embeddings under a source-calibrated lag-64 thermal-SNR gate with exact low-SNR fallback. Over unlabeled target AP captures, forward-only unbalanced optimal-transport calibration (UOT-CAPC) aligns shifted prototypes under packet-arrival skew and recovers parameter-free balanced Sinkhorn (U-CAPC) at equipartition. Across DataPort-WiFi, WiSig, and ORBIT MobRFFI, zero-retrain GSDF wins all 72/72 paired runs across eight backbones with 0.00 pp low-SNR loss, while edge IB-Host + GSDF (92.6K-93.3K active parameters, 1.82 ms single-core CPU latency) and timing-synchronized GSDF-STO / GSDF-Tri reach 57.50%-65.05% three-benchmark Macro-F1 (89.04%-100.00% over 5-10-packet IoT bursts).

Closest papers

Nearest neighbours by meaning across the whole index.

What Does an RF Fingerprint Identify? A Cross-Corpus Evaluation of Hardware-Family-Associated and Unit-Level Signal

cs.CR cs.LG ·2026-11-10 ·Hyojung Han
benchmark similarity 0.57
Abstract · 20 pages, 4 tables, no figures

RF fingerprinting benchmarks report how well a classifier separates transmitters, not whether that separability reflects the individual unit or its hardware family. We compare a benchmark's real hardware grouping with size-matched random groupings of the same devices, using calibrated, unclipped variational lower bounds under label-blind, device-level cross-fitting on devices never seen in training. On WiSig (OFDM Wi-Fi), the generation grouping exceeded all 999 matched random groupings (permutation p = 0.001, the resolution floor), although no grouping attained a positive certified bound, and the direction survives removing channel equalization. A preregistered replication on a LoRa corpus (chirp spread spectrum, three hardware models), with a front-end frozen on synthetic data, again exceeded all 999 (p = 0.001), and two sensitivity analyses judged by a reversal rule fixed in advance did not reverse the direction. This is a directional replication only: the excess magnitude reflects a miscalibrated null, the chain-rule decomposition leaves a residual of +0.296 bits, and capture order is undocumented. In a same-model corpus of 122 ESP32 radios, a temperature-calibrated held-out bound of +3.338 bits (label entropy 6.931 bits) indicates substantial device-specific identity, not separable from per-device capture-session effects; relying on the calibrated bound was decided after the uncalibrated bound changed sign. On synthetic transmitters a high-capacity convolutional decoder reaches 98.5% of a known 6-bit ceiling, and the audit protocol leaves chain-rule residuals of +0.072 bits (synthetic, fixed physical features) and +0.060 bits (WiSig, audit features). Two further corpora were excluded by preregistered ingest gates. Across WiSig and LoRa, hardware-family groupings consistently produced stronger identity-associated signal than size-matched random groupings.

0.38

Backward-Compatible Tag-Based PHY Authentication for Secure WLAN Sensing

eess.SP ·2026-09-27 ·Dhia Elhak Zerrari, Amira Bendaimi, Hüseyin Arslan
published similarity 0.56
Abstract

Driven by ongoing standardization efforts, Wi-Fi sensing has recently emerged as a promising functionality within wireless local area networks (WLANs). However, due to the use of standard null-data packets (NDPs) to estimate the channel, conventional Wi-Fi sensing systems are susceptible to spoofing attacks. To counter this threat, we propose a lightweight tag-embedding scheme that enables physical layer authentication (PLA) of sensing signals. Specifically, a secret tag is superimposed onto the orthogonal frequency division multiplexing (OFDM) channel sounding signal, allowing legitimate WLAN receivers to verify signal authenticity and detect spoofed transmissions. A unique tag is generated for each transmission to avoid replay attacks, and the subcarrier occupancy of each tag is randomized to minimize the mean channel estimation error at each subcarrier. Simulation results demonstrate reliable authentication performance with a 95% correct authentication rate at a signal-to-noise ratio (SNR) of 10dB, while introducing an additional channel estimation error of only 0.52dB at legacy receivers that are unaware of the embedded tag. Thus, our proposed scheme provides an effective and backward-compatible countermeasure against spoofing attacks, enhancing the trustworthiness of future Wi-Fi sensing systems.

0.36

FedSwitch: Federated Region Classification From Wireless Channel Measurements

eess.SP ·2026-10-02 ·Mattia Piana, Stefano Rini, Stefano Tomasin
similarity 0.54
Abstract

Wireless Internet-of-Things (IoT) networks can leverage locally observed channel state information (CSI) at base-stations (BSs) to perform region classification, i.e., infer the region of origin of a transmitter (TX), thereby enabling channel-based authentication. However, centralizing these measurements incurs substantial communication overhead and requires sharing location-dependent radio fingerprints. To address these difficulties, we propose an edge-native federated learning (FL) framework where BSs collaboratively train a shared classifier via a parameter server (PS) without exposing raw data, thereby supporting physical-layer security tasks like spoofing detection. To overcome the statistical heterogeneity arising from diverse BS locations and propagation conditions, we introduce FedSwitch, a personalized FL algorithm that automatically transitions edge nodes from collaborative training to local fine-tuning upon loss stagnation. We provide theoretical convergence guarantees for the proposed collaborative training phase and derive analytical bounds linking classification errors to statistical discrepancies. Extensive evaluations on synthetic channel measurements demonstrate that FedSwitch significantly improves region-classification accuracy over standard FL baselines.

0.17

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.53
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

AmbSentry: Mitigating Sensing Eavesdropping in ISAC Systems by Harnessing Ambient IoT Devices

cs.CR ·2026-08-12 ·Yifan Zhang, Yu Bai, Riku Jantti, Zhu Han, Christos Masouros
similarity 0.52
Abstract

Integrated sensing and communication (ISAC) has emerged as a pivotal paradigm for 6G networks, enabling the synergistic convergence of spectral and hardware resources to maximize system efficiency. However, the inherent openness of wireless transmission exposes ISAC systems to critical security risks, particularly regarding the privacy of the sensing information. Unauthorized sensing eavesdroppers can extract sensitive target parameters (e.g., range and velocity) by directly estimating open sensing echo channels, rendering traditional data-based protection techniques ineffective. To mitigate this threat, this paper proposes AmbSentry, an ISAC system that prevents the leakage of sensing information to sensing eavesdroppers by harnessing naturally distributed passive ambient IoT (AIoT) devices. Specifically, these AIoT devices are strategically configured to act as cooperative jammers and ghost targets, introducing controllable interference into the sensing environment. Based on the proposed system, we formulate a joint optimization problem to maximize the integrated sidelobe level at the eavesdropper under quality-of-service (QoS) constraints, thereby degrading sensing eavesdropping performance while maintaining sensing and communication performance for legitimate receivers. Since the problem is non-convex, we further develop an efficient iterative algorithm to cooperatively design the transmit beamforming at the base station and the reflection modulations of the AIoT devices based on Dinkelbach transformation and block coordinate descent methods. The detailed results also demonstrate that AmbSentry significantly enhances sensing security, allowing the legitimate sensing receiver to achieve a 14-dB SNR advantage in detection probability and a hundred times lower estimation error compared to the eavesdropper.

0.37

Interpretable Feature Learning for RF Fingerprinting via Polar MKANs

eess.SP cs.LG ·2026-08-20 ·Mikhail Krasnov, Ljupcho Milosheski, Carolina Fortuna
benchmark similarity 0.52
Abstract · 5 pages, 5 figures, 3 tables

Radio frequency (RF) fingerprinting authenticates wireless devices from hardware-induced I/Q impairments, typically with deep learning feature extractors that are accurate but opaque, limiting their use in security critical settings. We propose Polar Monotonic Kolmogorov-Arnold Networks (Polar MKAN), a block partitioned monotonic encoder on polar inputs in which each latent dimension depends exclusively on magnitude or phase, yielding channel separation and monotone responses by construction. On a synthetic gain and carrier frequency offset (CFO) benchmark, Polar MKAN reaches 57.2 percent DCI Disentanglement versus at most 12.9 percent for unpartitioned baselines. We further evaluate the detection accuracy trade off on real data and the sensitivity to blind CFO compensation.

0.36

From Identification to Authentication for Micro-CSI RF Fingerprinting in OFDM Systems

eess.SP ·2026-08-30 ·Matteo Varotto, Stefano Tomasin
similarity 0.51
Abstract

We consider a scenario where a legitimate user (Alice) authenticates itself to an authenticator (Bob) by transmitting orthogonal frequency division multiplexing (OFDM) pilots, from which the authenticator extracts the Micro-CSI (M-CSI) fingerprint and compares it against a stored reference via a likelihood test (LT)-based test. We introduce a new spoofing attack, where two adversarial devices collude to first jointly estimate the M-CSI fingerprints of Alice and Bob and then construct a forged signal able to break the authentication mechanism with high probability, limited only by noise effects on the estimates. We derive approximate closed-form distributions of the authentication test statistic under both the legitimate and spoofing hypotheses, enabling the derivation of false alarm and misdetection probabilities in closed-form. We then validate our analytical results against M-CSI fingerprints extracted from experimental data. The results reveal that, given sufficient pilot observations or an equivalent noise statistic between Bob and the attackers, the latter can always drive the test statistics to a random classifier, vanishing the security of M-CSI-based authentication.

0.25

SFPF: Spatio-Frequency Polarization Fingerprint for Anomalous Wireless Device Detection

cs.CR ·2026-09-18 ·Xiaoxuan Huang, Jinlong Xu, Daoyuan Shen, Meng Zhang, Dong Wei
similarity 0.50
Abstract

Periodic inspection of deployed wireless devices is necessary because unauthorized hardware replacement may preserve communication functions, credentials, and logical identity, making anomalous devices difficult to detect. Such inspections are conducted under controlled measurement conditions to verify that each device remains consistent with its enrolled hardware state. Conventional radio-frequency fingerprint (RFF) may provide insufficient separation when replacement hardware closely resembles legitimate hardware, while a polarization fingerprint (PF) constructed at one observation direction may miss spatially nonuniform polarization changes. This paper proposes the spatio-frequency polarization fingerprint (SFPF), which jointly represents complex polarization responses over multiple frequencies and observation directions; conventional PF is its fixed-direction slice. We derive SFPF formation from hardware-dependent modal excitation, directional far-field radiation, and polarization projection. A first-order sensitivity analysis shows that the response to the same hardware change varies with both frequency and direction, motivating joint spatio-frequency acquisition. Electromagnetic simulations confirm the nonuniform spatio-frequency sensitivity and show that, under the same observation budget, SFPF improves normalized distance, Fisher score, and the inter-/intra-class ratio over PF by 17.7%, 45.8%, and 11.3%, respectively. Experiments show that SFPF consistently outperforms RFF and PF over 0--20~dB. At 15--20~dB, SFPF achieves anomalous-device F1 scores of 87.3--90.4% and AUROC values of 85.4--95.5%.

0.29