CS Paper Radar

MAPLE-RF: Efficient Probabilistic RF Source Localization in Partially Explored Environments

Haozhe Lei, Sundeep Rangan

cs.RO eess.SP ·submitted 2026-09-17 19:26 UTC · v1

Abstract

Localizing a radio-frequency (RF) transmitter from received signals often requires a model of the environment to predict how obstacles block and reflect the signal. In many robotic applications, however, only a partial map is available, particularly when a robot localizes the source while exploring with simultaneous localization and mapping (SLAM). We study single-snapshot transmitter localization on such partially explored maps and compare two approaches that output a posterior over transmitter locations. The first extends a digital-twin method, which ray-traces every candidate location, to partial maps by treating unexplored space as free and training on mixed map coverage. The second, MAPLE-RF, encodes estimated path angles of arrival and signal-to-noise ratios as grid channels aligned with map knownness, occupancy, and line-of-sight visibility, and a U-Net scores all candidate positions in one pass without simulating propagation at inference. Ray-tracing simulations of indoor environments indicate that training on mixed map coverage is essential for both approaches. The digital-twin approach is more accurate on most single-snapshot metrics, while MAPLE-RF comes close at a query cost that does not depend on the propagation model and is more than two orders of magnitude below a fresh full-grid query with general-purpose ray tracing. Both outperform Gaussian and Gaussian-mixture baselines, and on exploration routes guided by its own estimates, fused MAPLE-RF posteriors place more probability near the source than the compared methods. Code and data will be released.

Closest papers

Nearest neighbours by meaning across the whole index.

MAPLE: Mondrian-Anchored Prior for Learning-free Indoor Exploration

cs.RO ·2026-10-20 ·Kelvin Aladum, Nisar Ahmed
similarity 0.68
Abstract

Robots exploring unknown indoor environments must decide where to move while much of the environment remains unseen. Predicting the occupancy of unseen space beyond the current sensor range can improve these decisions, but recent approaches commonly rely on learned models that require offline training and repeated inference during exploration. We introduce the Mondrian-Anchored Prior for Learning-free Indoor Exploration (MAPLE), a training-free predictive approach that adapts the Mondrian process into an online generative prior conditioned on observed geometric cues in the current partial map. MAPLE generates multiple plausible map hypotheses and evaluates visibility separately within each to estimate frontier gain, preserving differences in predicted visibility across hypotheses. Across KTH floor-plans and real-SLAM environments at multiple sensor ranges, MAPLE consistently improves over non-predictive exploration and remains competitive with learned predictive approaches. Its lightweight procedural construction enables predictive exploration with limited computational resources. Experimental results further show that more accurate map prediction does not necessarily produce better exploration, highlighting the importance of how predictions are represented and used in exploration decisions.

0.16

Visual-Wi-Fi Navigation to Signal-Emitting Devices

cs.RO ·2026-10-08 ·Lihao Wang, Tianjian Xu, Tianmin Shu, Renjie Zhao
similarity 0.64
Abstract · Under review

Indoor navigation to task-relevant targets remains difficult when the target is small, occluded, or visually indistinct. Meanwhile, smart appliances, mobile devices, and IoT tags emit Wi-Fi signals during everyday communication, providing a pervasive but underused spatial cue. We study visual-Wi-Fi navigation, where a robot reaches a signal-emitting device in an unmapped environment using onboard visual observations and Wi-Fi packets overheard from the device, without connecting to the device or modifying infrastructure. Realizing this requires pose-dependent Wi-Fi observations during closed-loop policy learning and reliable spatial cues from bearing measurements corrupted by indoor multipath propagation on a moving robot. We present WiFiSpaces, which extends the Habitat embodied simulator with online ray-traced Wi-Fi sensing, rendering Wi-Fi observations for a robot-mounted antenna array at continuous poses during policy rollouts. On top of it, we build ViFiNav, a localization-aware navigation framework: an online source-localization algorithm exploits robot motion to disambiguate and robustly aggregate bearings from multiple viewpoints into a confidence-aware source estimate, and a learned policy fuses this evolving estimate with depth observations and learns to act on it as it is refined. Experiments show that exploiting robot motion is key to accurate source estimates, and that fine-tuning on ray-traced Wi-Fi observations in WiFiSpaces improves the success rate of ViFiNav. The policy transfers zero-shot to unseen scene datasets, and we deploy it on a real robot with a Wi-Fi sensor built from a commodity router, without any real-world training.

0.22

Diagnosing and Dynamically Filtering Occupancy World Models for Active Mapping

cs.RO cs.CV ·2026-09-06 ·Jiahui Zhang, Gongbo Liang, Yu Zhang
published similarity 0.64
Abstract · Accepted by IEEE IROS 2026 Workshop on WORLDS: World Models and Spatial Intelligence for Physical AI

Active mapping requires a robot to select camera viewpoints that efficiently reconstruct an unknown 3D scene. To reason about unobserved regions, recent systems use pretrained occupancy networks as world models that complete missing geometry. The predicted structure contributes to expected coverage gain and constrains feasible robot motion. Consequently, occupancy errors can change both what the robot chooses to explore and where it is able to move. We diagnose these effects by holding the planner fixed and varying only the occupancy representation provided to it. We consider planning without completion, with learned occupancy, with false positives removed by a ground truth oracle, with false negatives restored by an oracle, and with ground truth occupancy. Our experiments show that correcting false positives or false negatives alone does not consistently improve final coverage. This finding reveals a gap between occupancy accuracy and downstream planning performance. Ground truth occupancy provides a much larger improvement in coverage efficiency than in endpoint coverage, suggesting that planning and reachability remain important bottlenecks even when the geometric world model is accurate. Based on these findings, we introduce a dynamic filtering strategy that preserves predictions in unexplored space while suppressing repeatedly unsupported occupancy using online observations. Preliminary examples show that this strategy can redirect viewpoint selection toward reachable surfaces that would otherwise remain unobserved.

0.34

Bridging the Data Gap: Digital Twin as a New Paradigm for AI-based Radio Sensing

cs.LG eess.SP ·2026-08-11 ·Éloi Sainte-Beuve, Guillaume Larue, Louis-Adrien Dufrène, Quentin Lampin, Ali Al Khansa
published similarity 0.63
Abstract · Accepted at EUSIPCO 2026

We present a methodology that places a 3D digital twin (DT) of the environment as the main enabler behind the development of radio sensing at scale. The DT acts as a world model, providing geometry, materials, and transmitter/receiver placements to a ray-tracing engine that generates time-indexed channel impulse responses (CIRs) for large numbers of plausible scenes (moving people and objects, layout variants, seasonal/weather conditions, etc). From these synthetic sequences, we train a sequential neural network that maps CIR time series to spatial occupancy estimates, enabling device-free localization (DFL) without instrumented targets. We posit that sensing is best approached as an environment-conditioned learning problem: rather than seeking a single global model, we advocate training or fine-tuning local models specialized to a site-specific DT. As a first experiment, we introduce a novel State Space Model architecture, trained and evaluated across multiple room geometries. The localization performances obtained demonstrate the potential of the approach.

0.19

Transformer-based Monte Carlo Localization in Construction Meshes

cs.RO ·2026-09-25 ·Linus Kramer, William Talbot, Olga Vysotska, Marco Hutter
similarity 0.62
Abstract

To be able to perform inspection or digitization tasks, mobile robots on construction sites must be able to localize themselves reliably with respect to a global reference frame that is shared with a building map. Similar room layouts and low-texture surfaces pose a challenge for existing LiDAR- and vision-based localization methods. We approach this problem with a LiDAR-based global relocalization system that estimates the robot's pose relative to a building mesh and combines a PointNet++ encoder with a place recognition decoder, whose outputs serve as a learned observation model within a Monte Carlo Localization (MCL) framework. The pipeline is trained exclusively on synthetic LiDAR scans obtained by simulating the robot's sensors inside the building mesh. Our approach is robust in ambiguous environments due to an uncertainty-aware decoder that scales positional likelihoods and a resampling strategy that injects model hypotheses into the particle set, enabling recovery from potential particle depletion. Evaluations on real-world datasets show that our method outperforms both diffusion-based and ScanContext++ baselines while maintaining fast inference (18 ms per call), demonstrating the practicality of synthetic-data training for mesh-referenced global localization in construction robotics.

0.18

RadioTraj3D: Height-Aware Adaptive Sampling for 3D Radio-Map Reconstruction from Ultra-Sparse Trajectories

eess.SP ·2026-10-30 ·Zixuan Guo, Xiucheng Wang, Wenshuo Chen, Conghao Zhou, Chuan Huang +2 more
similarity 0.62
Abstract

Aerial networks require radio propagation information at unvisited positions and heights to plan routes, select links, and allocate wireless resources. A three-dimensional radio map (3D RM) represents propagation conditions over the service area, enabling these decisions before flight. However, constructing such a map from autonomous aerial vehicle (AAV) measurements is challenging, since radio measurements are available only along the trajectory, whereas the target covers the 3D service volume. Existing methods use fixed AAV trajectories that ignore how building distributions and heights affect electromagnetic propagation, missing the heights most informative for RM reconstruction. To address these issues, we propose RadioTraj3D, which uses building-height information to coordinate measurement selection and layer-wise reconstruction. Building-height variations reveal propagation-sensitive layers that guide height-adaptive sampling. We therefore propose G-METS to select geometry-sensitive heights and allocate an exact budget across edge, corridor, and open regions before channel acquisition. A dual-view reconstructor then integrates local three-dimensional boundaries with full-height context through one bounded coefficient per layer. Simulated outdoor and indoor maps demonstrate state-of-the-art reconstruction across environments and vertical grids. On real-world AAV measurements from the LACN dataset, RadioTraj3D improves peak signal-to-noise ratio by 0.84 dB and reduces normalized mean squared error by 17.5% over Completion AE.

0.32

Rethinking Learned Occupancy in Autonomous Active Mapping with Observation-Gated Filtering

cs.RO cs.CV ·2026-09-08 ·Jiahui Zhang, Bonian Han, Gongbo Liang, Yu Zhang
publishedbenchmark similarity 0.62
Abstract · Accepted to IROS 2026 Space Robotics Workshop (oral)

Autonomous 3D active mapping requires a space robot to choose where to sense while building the geometry needed for navigation. Learned occupancy completion extends spatial context beyond the current field of view, but one predicted map often serves two planning roles: it scores expected surface gain and constrains collision-free motion. Unsupported occupancy can therefore distort both where the robot looks and where it believes it can travel. We study this coupled interface in a controlled closed-loop benchmark by holding the active-mapping system fixed and varying only its planner-facing occupancy across observation-only, learned, oracle-corrected, and ground-truth conditions. Improving occupancy accuracy does not monotonically improve closed-loop coverage: across 25 starts, planning with ground-truth occupancy reaches 70% of the learned baseline's final coverage 12.7 steps earlier on average, while increasing final coverage by only 0.031. Guided by this diagnosis, we introduce an observation-gated filter that retains completion in insufficiently observed regions and suppresses predictions only after repeated frustum exposure without nearby RGB-D support. The filter improves both targeted failure-prone starts without retraining or ground truth. These results motivate online revision of planner-facing geometry during autonomous intervals between communication windows. The current study assumes benchmark RGB-D observations and sufficiently accurate pose estimates; planetary sensing conditions and accumulated localization drift remain to be evaluated.

0.26

Distributed Relative Localization for Homogeneous Multi-Robot Systems through UWB Ranging and Limited Communications

cs.RO ·2026-10-08 ·Zhiqiang Cao, Ran Liu, Billy Pik Lik Lau, Chau Yuen, U-Xuan Tan
top venue similarity 0.62
Abstract · This paper has been published in IEEE/ASME Transactions on Mechatronics

Accurate and reliable relative localization is crucial for multi-robot applications like exploration, search, and rescue missions. LiDAR-based solutions offer high accuracy in localizing surrounding objects; however, distinguishing homogeneous robots with similar appearances remains challenging due to the lack of distinctive identification features. In this paper, we propose a fully distributed relative pose estimation approach by integrating LiDAR, UWB, and odometry measurements, allowing each robot to accurately and continuously localize its teammates without external infrastructure. Specifically, potential anonymous teammate robot clusters from LiDAR scans are tracked by a dynamic tracker. We then identify teammate robots from these tracked anonymous clusters using a joint matching strategy, ensuring reliable data association between robots and clusters. Finally, by combining the corresponding LiDAR observations, UWB ranging, and odometry measurements, each robot precisely localizes others while minimizing data exchange. The system requires only odometry data exchange through onboard UWB, eliminating the need for additional communication infrastructure like WiFi routers or mesh networks. Extensive simulation and real-world experiments demonstrate the effectiveness and reliability of the proposed relative localization approach.

0.38