CS Paper Radar

Analysis of Integrated Communication and Sensing in Cylindrical Aerial Corridors

Harris K. Armeniakos, Petros S. Bithas, Athanasios G. Kanatas, Harpreet S. Dhillon

eess.SP ·submitted 2026-10-12 08:01 UTC · v1

Abstract

In unmanned aerial vehicle (UAV) networks, integrated communication and sensing (ISAC) is emerging as a key enabler to support extended and continuous communication and sensing capabilities for sixth-generation (6G) services among UAVs operating in swarms. In this paper, a comprehensive framework is presented to investigate the ISAC coverage probability of a reference UAV-base station (BS) in a UAV network. A fixed number of UAV user equipment (UAVUEs) and UAV-BSs are deployed in an aerial corridor modeled as a finite cylinder. The three-dimensional (3D) binomial point process (BPP) is used to model both the 3D spatial locations of the UAV-UEs and the UAV-BSs. By adopting realistic 3D third generation partnership project (3GPP) antenna patterns for both the UAV-UEs and UAV-BSs, the UAVs' boresight direction of the maximum antenna gain is modeled as a random unit vector. All UAV-BSs have sensing capabilities, so an arbitrary yet fixed reference UAV-BS acts as a monostatic radar to acquire sensing measurements associated with a target UAV-UE at a given time snapshot while the target UAVUE communicates with the reference UAV-BS. Consequently, considering both clutter and communication interference, exact analytical expressions for ISAC coverage probability are derived. Low complexity baseline analytical expressions are also derived by ignoring clutter interference and directional characteristics of the UAV-UEs. Finally, motivated by the vision for intelligent UAV networks, a DeepSets-based model is developed and trained to estimate the optimal location of the reference UAV-BS that maximizes ISAC performance given a spatial deployment of the UAVs. To the best of our knowledge, this is the first work to rigorously investigate ISAC performance in UAV networks while incorporating the directionality characteristics of the UAV antennas.

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Communication and Sensing in Aerial Corridors: A Novel Stochastic Geometry Framework

cs.IT ·2026-10-01 ·Harris K. Armeniakos, Petros S. Bithas, Athanasios G. Kanatas, Harpreet S. Dhillon
published similarity 0.88
Abstract · accepted for presentation in 2026 IEEE GLOBECOM

In unmanned aerial vehicle (UAVs) networks, joint communication and sensing (JCAS) is emerging as a key enabler to support extended and continuous communication and sensing capabilities for sixth-generation (6G) services among UAVs operating in swarms. Within this framework, aerial corridors provide a structured environment for supporting coordinated and reliable operations. In this paper, a comprehensive frame- work is presented to investigate the JCAS coverage probability (CP) of a UAV-base station (BS) in an aerial corridor populated by UAV-user equipments (UEs). The corridor is modeled as a finite cylinder, within which a fixed number of UAV-UEs are spatially distributed according to a three-dimensional (3D) binomial point process (BPP). The UAV-BS is assumed to be equipped with a realistic 3D third generation partnership project (3GPP) antenna pattern and exploits radar sensing capabilities to track a known UAV-UE. Subsequently, the tracked UAV-UE is assumed to perform uplink communication with the UAV-BS. Accordingly, the JCAS CP at the UAV-BS is analyzed under the presence of clutter and uplink communication interference, and exact-form analytical expressions are derived. To the best of our knowledge, this is the first work to develop a stochastic geometry framework for the rigorous analysis of JCAS performance in aerial corridors, with UAV-UE locations modeled as a 3D BPP. Among several insights, results show that increasing the directivity of the UAV-BS antenna beams leads to notable JCAS performance gains, particularly for shorter UAV corridors.

0.53

Communication and Sensing Coverage of UAV Corridor under Beam Misalignment Error

cs.IT ·2026-10-01 ·Harris K. Armeniakos, Petros S. Bithas, Konstantinos Maliatsos, Christos Masouros, Athanasios G. Kanatas
published similarity 0.76
Abstract · Accepted for presentation in IEEE ISAC 2026

In this paper, a unmanned aerial vehicle (UAV) corridor-assisted network is proposed to study the joint sensing and communication (JCAS) coverage probability (CP) of a terrestrial (BS) equipped with a realistic three-dimensional (3D) 3GPP antenna pattern. By employing the 3D binomial point process (BPP) to model the spatial locations of the UAV-UEs, a fixed number of UAV-UEs are deployed in an aerial corridor modeled as a finite cylinder. The BS exploits radar sensing capabilities to track a known UAV-UE under a 3D beam misalignment error, which follows a multivariate normal distribution. Subsequently, under clutter and uplink communication interference, exact- form analytical expressions for JCAS CP are derived and used to analyze the performance at the terrestrial BS. The results highlight corridor-length saturation at high UAV heights and the beamwidth trade-off between interference suppression and misalignment sensitivity.

0.34

Integrated Sensing and Communication in 3GPP: Standardization, Performance Evaluation, and Experimental Validation Toward 6G

eess.SP ·2026-10-16 ·Gosan Noh, Gebremeskel Seiley Abraha, Joshua Yabana, Nathaniel Foli, Michael Ankomah Asare +8 more
similarity 0.60
Abstract

Integrated sensing and communication (ISAC) is evolving from a primarily physical-layer research into a standardized cellular-network capability spanning channel modeling, radio procedures, network architecture, and the delivery of sensing services. We review this progression within the Third Generation Partnership Project (3GPP), from Release 19 service requirements and target-aware channel modeling to the Release 20 New Radio (NR) sensing evaluation framework, radio access network procedures, and system architecture, and discuss future directions toward 6G. We then present two 3GPP-aligned simulation case studies to demonstrate the corresponding evaluation approaches. The first case study compares hard-decision, soft-decision, and hybrid fusion for unmanned aerial vehicle (UAV) sensing using multiple transmission and reception points (TRPs). Detection, false alarms, and conditional position and velocity accuracy are evaluated using receiver-derived angle estimates and separately calibrated method-specific thresholds. The second case study compares ideal and practical sensing-assisted predictive handover with conventional handover, while accounting for sensing error and information age. We further present a testbed-based measurement study that characterizes monostatic and bistatic UAV radar cross sections across frequencies, platforms, and observation angles and provides empirical support for correlated target-response modeling. Finally, we discuss open challenges and future research directions in multi-node fusion, resource and interference management, network evolution, security, privacy, and reproducible evaluation. Together, these components connect calibrated channel models, link- and system-level simulation, real-time prototypes, controlled measurements, and field trials through a staged evaluation roadmap.

0.23

Pareto-Optimal Rate-CRLB Tradeoff via Anchor Placement Optimization for UAV-Assisted 3D ISAC

eess.SP ·2026-09-14 ·Haoyu Jiang, Hengyou Kong, Xiaoli Xu, Yong Zeng
benchmarktheory similarity 0.58
Abstract

This paper considers an unmanned aerial vehicle (UAV)-assisted 3D integrated sensing and communication (ISAC) system, where a UAV is deployed to communicate with a base station (BS) and simultaneously monitor a volume of interest (VoI). By exploiting the flexible placement of the UAV anchor node, we aim to characterize the Pareto optimal tradeoff between the communication rate and sensing CRLB. For the special case of a singleton VoI, the exact Pareto-optimal UAV anchor placement set is shown to be the line segment connecting the BS and the sensing target. For a radially truncated spherical sector VoI, we derive geometric conditions under which all Pareto optimal UAV locations are confined to an axial segment inside the inner radial boundary. For general VoIs, we prove the convexity of the regional worst-case CRLB in the inner region, derive a Pareto-optimal radius upper bound, and develop an efficient algorithm to find the Pareto-optimal UAV anchor node placement. Numerical results validate the analytical placement structures and demonstrate that our proposed design achieves significantly enlarged rate-CRLB region over benchmark schemes.

0.26

Beyond RSRP Coverage: UAV Serviceability in Interference-Limited Urban 5G NR Networks

eess.SY ·2026-09-18 ·Md Sharif Hossen, Vijay K. Shah, Ismail Guvenc
similarity 0.57
Abstract · 6 pages, 4 figures

Reference signal received power (RSRP) is commonly used to assess 5G cellular coverage, but it may substantially overestimate the connectivity available to cellular-connected unmanned aerial vehicles (UAVs) under strong inter-cell interference (ICI). As a UAV ascends, reduced blockage can strengthen the serving signal, while increased line-of-sight visibility to neighboring sectors can intensify ICI. This paper develops a trajectory-aware, 3GPP-based system-level framework for evaluating UAV radio serviceability during a three-dimensional flight in an urban 5G New Radio network. The framework jointly evaluates RSRP, reference signal received quality (RSRQ), and signal-to-interference-plus-noise ratio (SINR) in a 19-site, 57-sector deployment. We introduce the concept of coverage-serviceability gap to quantify the difference between RSRP availability and joint service availability. Under RSRP, RSRQ, and SINR thresholds of -100 dBm, -18 dB, and 0 dB, respectively, an inter-site distance (ISD) of 500 m provides 99.9% RSRP availability but only 13.6% joint service availability, yielding a coverage-serviceability gap of 86.3 percentage points. With RSRQ and SINR thresholds of -22 dB and -6 dB, respectively, joint availability increases to 55.0% and 63.1% for ISDs of 500 m and 1000 m, respectively. These results demonstrate that RSRP-based coverage substantially overestimates joint UAV serviceability under both evaluation configurations, with SINR remaining the limiting metric.

0.45

From Ideal Motion to Flight-Executable Communications: LLM-Evolved Multi-UAV Deployment for Cell-Free Massive MIMO

eess.SP ·2026-09-21 ·Yuyao Wang, Gaoze Mu, Yongan Zheng, Yanzhao Hou, Qingqing Wu +3 more
similarity 0.57
Abstract · 13 pages. 12 figures

Cell-free massive multiple-input multiple-output (CF-mMIMO) is a promising paradigm for future wireless networks, providing user-centric services and cooperative coverage. By using unmanned aerial vehicles (UAVs) as aerial access points, CF-mMIMO networks can exploit UAV mobility to enhance three-dimensional (3D) coverage and spectral efficiency (SE). However, most existing studies on UAV deployment for communication optimization typically assume that UAVs follow ideal point-mass motion (IM), neglecting flight-control constraints and finite-horizon position errors in real flight execution. Consequently, IM-trained deployment policies may degrade severely or become difficult to execute in practice. Motivated by this, we model each UAV as a six-degree-of-freedom quadrotor rigid body with a cascaded flight controller to capture the impact of flight-control-constrained motion (FM) on communication optimization. Based on this model, we formulate a joint UAV 3D deployment and power allocation problem under FM to maximize the downlink average SE in CF-mMIMO networks. To address this problem, we propose LERE, a large language model (LLM)-enhanced multi-agent reinforcement learning (MARL) framework. In LERE, the LLM evolves hybrid rewards with both global and local components via multi-level feedback. The evolved hybrid rewards guide MARL policy optimization and promote multi-UAV cooperation. Experimental results demonstrate that LERE achieves higher SE than reward-design baselines while substantially reducing UAV position errors. Notably, when tested under FM execution, the FM-trained LERE policy achieves a 60.49\% SE gain over its IM-trained counterpart, confirming the necessity of incorporating flight-control constraints into UAV-enabled CF-mMIMO optimization.

0.18

UAV-Mounted Hybrid RIS-Assisted ISAC-RSMA: Performance Analysis with Imperfect CSI and SIC

eess.SP cs.ETcs.PFeess.SY ·2026-10-10 ·Chandan Kumar Singh, Arthur Sousa de Sena, Smriti Uniyal, Deepak Kumar, Prabhat K. Upadhyay +1 more
publishedtheory similarity 0.57
Abstract

In integrated sensing and communication (ISAC) systems, strict sensing requirements can substantially constrain the transmit power available for communication. A hybrid reconfigurable intelligent surface (HRIS) with passive reflection and active amplification capabilities mounted on an unmanned aerial vehicle (UAV) can enhance coverage and strengthen communication links in such power-limited regimes. Meanwhile, rate-splitting multiple access (RSMA) provides an effective transmission strategy for managing inter-user interference, particularly in dense multiuser wireless scenarios. Motivated by this, we analyze the performance of a UAV-mounted HRIS-assisted monostatic ISAC system employing RSMA scheme. We consider the imperfections in the channel state information and successive interference cancellation in the RSMA, which are inevitable in practical system implementations. We then derive highly accurate expressions for outage probability, ergodic rate, and throughput to evaluate communication performance over Nakagami-$m$ fading channels. These expressions reveal key insights into the diversity order and coding gain of the system in the high signal-to-noise ratio regime. To characterize the sensing performance, we derive expressions for the probability of detection, the probability of false alarm, and the Cramér-Rao lower bound. Numerical results validate the theoretical findings and highlight the performance gains of the proposed system over conventional multiple-access schemes and RIS-based systems.

0.39

Geometry-Aware Multi-UAV Full-Duplex Communication: System Design and Experiment

cs.IT ·2026-09-27 ·Tao Yu, Kiyomichi Araki, Tomohiro Mogi, Yasushi Hada, Kei Sakaguchi
published similarity 0.56
Abstract · accepted by IEEE Transactions on Vehicular Technology

The deployment of unmanned aerial vehicle (UAV) systems relies on high-performance yet lightweight wireless links between UAVs and ground stations (GSs). This paper presents a geometry-aware multi-UAV in-band full-duplex (MU-IBFD) communication system that uses high-gain directional antennas and separated uplink/downlink channels to convert self-interference into controllable co-channel interference (CCI) between UAVs, thereby avoiding energy-intensive self-interference cancelers on UAVs. We also derive a geometry-aware CCI model and define a reliable operating region (ROR) in the 3D airspace, within which the SINR requirement is satisfied. A prototype consisting of two UAVs and a GS is developed, and field trials are conducted. The measured CCI as a function of UAV positions agrees well with the theoretically predicted non-ROR region, and the downlink capacity significantly exceeds that of a conventional time-division duplex (TDD) with omni-directional scheme and higher transmit power and approaches that of ideal IBFD in most of the airspace. A proof-of-concept 4K/60p video transmission further demonstrates the practical potential of the proposed MU-IBFD system.

0.34