CS Paper Radar

A Reduced Greedy Minimum Distance Phase Shift Design for Quantized RIS-Assisted Spatial Modulation

Alexander Kelly, Mark F. Flanagan

eess.SP ·submitted 2026-10-12 10:09 UTC · v1
benchmark

Abstract

Reconfigurable intelligent surfaces (RISs) have emerged as a key enabler for next-generation wireless networks, offering control over the propagation environment through nearly passive reflecting elements. When combined with spatial modulation (SM), an RIS shapes a finite set of noise-free signal points at the receiver, and the error rate performance under maximum-likelihood (ML) detection is governed by the smallest pairwise Euclidean distance among these points. In this paper, we propose a low-complexity RIS phase shift design algorithm for RIS-assisted SM under practical discrete phase shift control. The proposed method targets the minimum Euclidean distance directly through a reduced greedy search over the discrete set of RIS phase shifts, in contrast to existing approaches that align RIS phase shifts to maximize the effective channel gain and therefore do not directly address the dominant error events. The search effort is controlled by a small set of integer parameters, providing a tunable trade-off between bit error rate (BER) performance and computational cost. We evaluate the proposed method against continuous and quantized phase-alignment baselines, including a complexity-matched comparison against the most directly comparable benchmark. Numerical results show that the proposed method achieves a significant SNR gain over quantized phase alignment under the same discrete hardware model, and this advantage persists under imperfect channel state information.

Closest papers

Nearest neighbours by meaning across the whole index.

Discrete Phase-Shift Optimization of Reconfigurable Intelligent Surfaces using Uniform Reference Directions

cs.PF cs.ITeess.SY ·2026-10-17 ·Pavithra P., Manoj Kumar Panda, Chandramani Singh
similarity 0.79
Abstract

Reconfigurable Intelligent Surfaces (RISs) enable programmable control of the wireless propagation environment through adjustable reflecting elements. A fundamental challenge in RIS-assisted communications is the optimization of discrete phase shifts to maximize the received signal power. While recently developed algorithms can obtain optimal solutions with linear complexity, their computational cost may still be excessive in applications requiring large-scale simulations, real-time adaptation, or repeated optimization over numerous channel realizations. This paper proposes a low-complexity discrete phase-shift optimization algorithm based on multiple reference directions within the feasible optimality sector. By evaluating candidate phase configurations generated from uniformly distributed reference directions, the proposed method systematically improves upon existing approximation approaches that rely on a fixed set of reference directions. The number of reference directions serves as a design parameter that enables a controllable trade-off between computational complexity and optimality. Extensive simulations demonstrate that the proposed algorithm achieves substantial computational speedups while maintaining a small optimality gap relative to the optimal solution. The results further show that increasing the number of reference directions progressively reduces the optimality gap, providing flexible operating points that can be tailored to application-specific complexity and performance requirements.

0.22

A Bussgang-based Latent Lifting Method: Discrete RIS Channel Estimation and Beamforming

eess.SP ·2026-11-07 ·Mintaek Oh, Namyoon Lee, Jinseok Choi
similarity 0.64
Abstract · 13 pages, 8 figures

This paper addresses the challenge of discrete phase-shift optimization in reconfigurable intelligent surface (RIS)-aided multiuser communication systems. Practical RIS hardware often utilizes low-resolution phase shifters, leading to challenging combinatorial optimization problems. To address this challenge, we propose a Bussgang-based latent lifting (BuLL) method that represents discrete phase shifts as quantized outputs of continuous latent variables. Our BuLL method calibrates the Bussgang gain and distortion covariance under a reference distribution and keeps these moments fixed during deterministic latent optimization. These fixed moments are then used to construct a distortion-aware continuous surrogate that incorporates reference-averaged discretization effects without penalty terms. For uplink channel estimation, we develop a matrix quadratic transform-based algorithm to optimize a mean-square-error surrogate. For downlink beamforming, we develop a generalized power iteration-based RIS phase-shift optimization algorithm for a spectral efficiency (SE) surrogate. Numerical results demonstrate improvements in channel estimation accuracy and sum SE over conventional benchmarks in the evaluated low-resolution RIS settings.

0.34

Optimization of Joint Beamforming in RIS-aided Multi-carrier and Multi-user MIMO Systems

cs.NI ·2026-11-04 ·Nuwan Balasuriya, Atefeh Termehchi, Ekram Hossain
similarity 0.64
Abstract

Reconfigurable intelligent surface (RIS)-aided multiple-input multiple-output (MIMO) communication is a promising enabler for beyond-fifth-generation wireless networks. However, RIS phase shifters typically rely on a tuning element (for example a variable-length stub), which can be optimally configured for only one carrier frequency at a time. This constraint complicates RIS deployment in multi-carrier systems and often necessitates additional measures, such as using multiple RIS panels or partitioning RIS elements across carriers. In this work, we propose a novel scheme in which all RIS elements simultaneously serve multiple carriers, delivering improved performance over existing approaches. Our method leverages the multiple reflections captured by physically consistent RIS models to realize the desired phase shifts for all carriers using a single stub length setting. We further develop a joint active and passive beamforming optimization framework tailored to multi-carrier, physically consistent RIS-aided systems. Simulation results confirm the effectiveness of the proposed

0.23

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.59
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

RIS Aided Multi-Way Communication Systems based on SIC Decoding Techniques

cs.IT ·2026-10-02 ·Lingya Wang, Harry Leib
similarity 0.59
Abstract

This work considers reconfigurable intelligent surface (RIS) aided multi-way communication systems employing QPSK. The objectives of such system is to allow multiple users to exchange information, exploiting the full-duplex capabilities of RIS. The system under consideration comprises $K$ user terminals and an RIS with $N$ reflective elements. Each user terminal is equipped with one transmit and $M$ receive antennas. To mitigate inter-user interference caused by the full-duplex operation of the RIS, three successive interference cancellation (SIC) techniques are considered. We investigate three SIC ordering methods: $1)$ descending channel variances, $2)$ increasing mean square error, $3)$ optimization approach which maximizes the combined channel gain within the system. The bit error rate (BER) performance of these three SIC methods are evaluated using extensive Monte-Carlo simulations for different numbers of RIS elements, ranging from 4 to 64, and a varying number of transmitting users, ranging from 1 to 5. Additionally, an RIS phase shift optimization method for RIS with reflection elements of varying amplitudes is considered. In this case the previous SIC optimization technique is adapted to address phase-dependent amplitudes in RIS reflection elements. Simulation results indicate that in both ideal and varying amplitude scenarios, when the number of RIS elements is small, SIC with ordering based on increasing mean square error achieves the best BER performance. However, as the number of RIS elements increases, SIC ordering based on the optimization method achieves the best BER performance.

0.27

Joint Beamforming and Phase Shifts Design for RIS-Enabled RSMA-ISAC Systems

cs.IT ·2026-08-19 ·Xuejun Cheng, Qian Zhang, Yuhui Jiao, Yufei Zhao, Zheng Dong +1 more
published similarity 0.59
Abstract

This paper investigates the sensing-centric design of reconfigurable intelligent surface (RIS)-enabled rate-splitting multiple access-integrated sensing and communication (RSMA-ISAC) systems. Specifically, we propose a new beam-gain approximation method to enhance the sensing beam gain while satisfying communication quality-of-service (QoS) constraints.Since the joint optimization of the beamforming vectors and RIS phase shifts is highly coupled and non-convex, existing methods typically rely on generic optimization solvers involving substantial computational complexity. To address this issue, we propose an efficient constraints-separation-based alternating optimization algorithm (CS-AO). Our proposed algorithm effectively decouples the optimization variables and yields closed-form solutions for all subproblems, thereby significantly reducing the computational burden. Simulation results show that the proposed algorithm achieves sensing beam-gain performance comparable to successive convex approximation (SCA) and semidefinite relaxation (SDR) benchmarks, while achieving more than 120-fold and 50-fold runtime reductions. In addition, compared with conventional space-division multiple access (SDMA) schemes, the proposed design exhibits substantial sensing beam gain.

0.56

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.59
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.58
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15