CS Paper Radar

Optimization of Joint Beamforming in RIS-aided Multi-carrier and Multi-user MIMO Systems

Nuwan Balasuriya, Atefeh Termehchi, Ekram Hossain

cs.NI ·submitted 2026-11-04 01:06 UTC · v1

Abstract

Reconfigurable intelligent surface (RIS)-aided multiple-input multiple-output (MIMO) communication is a promising enabler for beyond-fifth-generation wireless networks. However, RIS phase shifters typically rely on a tuning element (for example a variable-length stub), which can be optimally configured for only one carrier frequency at a time. This constraint complicates RIS deployment in multi-carrier systems and often necessitates additional measures, such as using multiple RIS panels or partitioning RIS elements across carriers. In this work, we propose a novel scheme in which all RIS elements simultaneously serve multiple carriers, delivering improved performance over existing approaches. Our method leverages the multiple reflections captured by physically consistent RIS models to realize the desired phase shifts for all carriers using a single stub length setting. We further develop a joint active and passive beamforming optimization framework tailored to multi-carrier, physically consistent RIS-aided systems. Simulation results confirm the effectiveness of the proposed

Closest papers

Nearest neighbours by meaning across the whole index.

Tri-Hybrid Beamforming for T-RIS-Enabled Base Station

cs.IT ·2026-08-20 ·Hongtao Zhang, Chenlong Ding
similarity 0.67
Abstract

Transmissive reconfigurable intelligent surfaces (T-RISs) integrated into the transmitter provide a viable realization of tri-hybrid multiple-input multiple-output (MIMO), where spatial processing is distributed across the digital, analog radio-frequency (RF), and electromagnetic (EM) domains. However, unlike conventional RIS-assisted links, a transmitter-native T-RIS directly participates in radiation formation, making T-RIS front-end modeling and weighted sum-rate (WSR)-oriented joint precoding challenging under practical hardware constraints. This paper develops a unified modeling and precoding framework for transmitter-native T-RIS tri-hybrid multi-user (MU) downlink transmission. Specifically, starting from a continuous-field description, the received field is characterized by the interaction among the feed array, the programmable T-RIS aperture, and the user-side propagation, leading to a cascaded baseband input-output model for MU precoding. Furthermore, the same representation is instantiated in the Fresnel, Fraunhofer, and mixed-field regimes, so that near-field focusing and far-field angular steering can be handled within one front-end model. Additionally, a WSR maximization problem is formulated over the digital precoder, analog network, and T-RIS coefficients under power and quantization constraints. A two-level solver is then developed by coupling outer weighted minimum mean-square error (WMMSE) updates with WMMSE-induced aperture-field shaping and hardware projection. Simulations validate the modeling accuracy and convergence, and show that the proposed full tri-hybrid design improves WSR over baselines while suppressing mixed-field cross-regime leakage.

0.17

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.66
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

Discrete Phase-Shift Optimization of Reconfigurable Intelligent Surfaces using Uniform Reference Directions

cs.PF cs.ITeess.SY ·2026-10-17 ·Pavithra P., Manoj Kumar Panda, Chandramani Singh
similarity 0.65
Abstract

Reconfigurable Intelligent Surfaces (RISs) enable programmable control of the wireless propagation environment through adjustable reflecting elements. A fundamental challenge in RIS-assisted communications is the optimization of discrete phase shifts to maximize the received signal power. While recently developed algorithms can obtain optimal solutions with linear complexity, their computational cost may still be excessive in applications requiring large-scale simulations, real-time adaptation, or repeated optimization over numerous channel realizations. This paper proposes a low-complexity discrete phase-shift optimization algorithm based on multiple reference directions within the feasible optimality sector. By evaluating candidate phase configurations generated from uniformly distributed reference directions, the proposed method systematically improves upon existing approximation approaches that rely on a fixed set of reference directions. The number of reference directions serves as a design parameter that enables a controllable trade-off between computational complexity and optimality. Extensive simulations demonstrate that the proposed algorithm achieves substantial computational speedups while maintaining a small optimality gap relative to the optimal solution. The results further show that increasing the number of reference directions progressively reduces the optimality gap, providing flexible operating points that can be tailored to application-specific complexity and performance requirements.

0.22

A Reduced Greedy Minimum Distance Phase Shift Design for Quantized RIS-Assisted Spatial Modulation

eess.SP ·2026-10-12 ·Alexander Kelly, Mark F. Flanagan
benchmark similarity 0.64
Abstract

Reconfigurable intelligent surfaces (RISs) have emerged as a key enabler for next-generation wireless networks, offering control over the propagation environment through nearly passive reflecting elements. When combined with spatial modulation (SM), an RIS shapes a finite set of noise-free signal points at the receiver, and the error rate performance under maximum-likelihood (ML) detection is governed by the smallest pairwise Euclidean distance among these points. In this paper, we propose a low-complexity RIS phase shift design algorithm for RIS-assisted SM under practical discrete phase shift control. The proposed method targets the minimum Euclidean distance directly through a reduced greedy search over the discrete set of RIS phase shifts, in contrast to existing approaches that align RIS phase shifts to maximize the effective channel gain and therefore do not directly address the dominant error events. The search effort is controlled by a small set of integer parameters, providing a tunable trade-off between bit error rate (BER) performance and computational cost. We evaluate the proposed method against continuous and quantized phase-alignment baselines, including a complexity-matched comparison against the most directly comparable benchmark. Numerical results show that the proposed method achieves a significant SNR gain over quantized phase alignment under the same discrete hardware model, and this advantage persists under imperfect channel state information.

0.24

Robust Joint Beamforming and Configuration Design in FARIS-Aided Systems

eess.SP ·2026-08-28 ·Hong-Bae Jeon, Yonghwi Kim, Hyung-Joo Moon, Kai-Kit Wong
similarity 0.63
Abstract

In this paper, we propose a robust transmission design for multi-user systems assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection and thereby offers enhanced flexibility, under imperfect channel state information (CSI). We formulate a robust minimum sum-rate maximization problem by jointly optimizing the base station beamformer, the utilized FARIS coefficients, and the active element selection, while explicitly accounting for CSI errors and practical power constraints. The resulting problem is inherently nonconvex due to the coupled optimization variables and discrete port-selection structure. To tackle this challenge, we first reformulate the original problem via a weighted minimum mean square error (WMMSE) approach and then devise an alternating optimization (AO) framework, where each resulting subproblem admits efficient solutions and the overall algorithm converges to a stationary point. Simulation results demonstrate that the proposed robust FARIS scheme consistently outperforms conventional designs, highlighting the effectiveness of jointly leveraging degree-of-freedom (DoF) enhancement and active signal amplification under CSI uncertainty.

0.09

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.63
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.62
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.62
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44