CS Paper Radar

Exploiting Mutual Coupling Structure for Channel Estimation of Active RIS-Assisted Links

Simon Tarboush, Pinjun Zheng, Hadi Sarieddeen, Tareq Y. Al-Naffouri, Giuseppe Caire

cs.IT eess.SP ·submitted 2026-09-17 20:30 UTC · v1

Abstract

Accurate channel modeling and estimation of active reconfigurable intelligent surface (RIS)-assisted links with densely integrated elements are essential to fully unleashing this technology's potential. This work adopts a physically consistent model incorporating mutual coupling (MC) effects, modeled via scattering parameters, in RIS-aided communication. We formulate the MC-aware channel estimation as a compressed sensing (CS) problem. The MC effect leads to an increase in the sensing matrix dimensions. This increased dimensionality substantially elevates the complexity of the formulated CS problem. To overcome this, we propose a low-complexity estimator that leverages the structure of the scattering matrix and MC mechanisms to obtain a reduced-size design sensing matrix. Numerical results demonstrate that our approach outperforms MC-unaware estimators by several dBs, achieving accuracy comparable to fully MC-aware solutions but with significantly lower complexity.

Closest papers

Nearest neighbours by meaning across the whole index.

Statistical Design of Multi-BD-RIS-Assisted User-Centric Cell-Free Massive MIMO

eess.SP ·2026-10-24 ·Mohammad Ezaz, Azadeh Vosoughi
theory similarity 0.64
Abstract · 6 pages, 5 figures. Submitted to IEEE ICC 2027 on Oct 16th 2026

We study the uplink of a user-centric (UC) cell-free massive MIMO system assisted by multiple beyond-diagonal reconfigurable intelligent surfaces (BD-RISs), under imperfect channel state information (CSI) and pilot reuse. The BD-RISs are modeled as reciprocal, lossless, group-connected scattering networks. We first derive the minimum mean-square error (MMSE) estimation statistics for each user's aggregate channel to its serving access points (APs). To avoid frequent CSI acquisition and RIS reconfiguration, we optimize the BD-RIS scattering matrices using long-term channel statistics, allowing their configurations to remain fixed over multiple coherence blocks. Specifically, we minimize the sum of normalized mean-square errors (NMSEs) of the MMSE aggregate channel estimators, subject to the symmetry and unitarity constraints of the group-connected architecture. We develop a product-manifold Riemannian optimization algorithm and analyze its convergence and computational complexity. To evaluate uplink spectral efficiency (SE), we separately derive a closed-form expression for the effective SINR under maximum ratio (MR) combining at the central processing unit (CPU) and establish a lower bound on the achievable ergodic SE. The SINR derivation accounts for the statistical dependence among channels associated with different APs due to shared BD-RIS-assisted propagation paths, including cross-AP second-order statistics under pilot reuse. Numerical results show that moderate group connectivity retains most of the NMSE improvements achieved by full connectivity, with larger optimization gains as BD-RIS-assisted paths strengthen relative to direct AP-user links. They also reveal that lower estimation NMSE does not necessarily lead to higher uplink SE.

0.32

Two-Stage Refinement Sparse Channel Estimation for Reconfigurable Intelligent Metasurface Antenna (RIMSA) Massive MIMO

cs.IT ·2026-09-19 ·Yakun Ma, Hui-Ming Wang, Jiaping He, Qingli Yan
top venue similarity 0.62
Abstract

To meet the increasing demands for high data rates and large capacity, next generation wireless communication systems require transceivers equipped with a large number of antennas. Massive multiple-input multiple-output (MIMO) with metasurface antennas has emerged as a promising solution. In this paper, we investigate the channel estimation problem for the emerging reconfigurable intelligent metasurface antenna (RIMSA) array systems. Specifically, we develop a two-stage refinement (TSR) channel estimation method based on the compressed sensing (CS) principle. In the first stage, we exploit the antenna structure of RIMSA to receive pilots by setting identical phase response vectors across all RIMSAs. In this manner, the coherence of the measurement matrix under the CS framework is reduced and the channel estimation performance is improved. However, this special design introduces channel direction-of-arrival (DoA) estimation ambiguity and yields an ambiguous candidate DoA set. In the second stage, we optimize the phase responses of the metamaterial elements to resolve the ambiguity and accurately estimate the DoAs and channel coefficients. Overall, the estimation accuracy is improved in the first stage at the cost of ambiguity, and this ambiguity is eliminated in the second stage. We illustrate the performance advantages of the TSR method by presenting the numerical results and comparing it with the existing methods.

0.28

Low-Complexity Channel Parameter Estimation for Coprime HRIS-Assisted MIMO Systems

eess.SP ·2026-08-13 ·Jean C. S. Ferreira, Melryllin G. O. Sousa, Fazal-E Asim
published similarity 0.58
Abstract

This paper proposes a parameter estimation scheme for uplink MIMO systems assisted by a Hybrid Reconfigurable Intelligent Surface (HRIS). To reduce hardware complexity, the HRIS employs a small number of active elements arranged in a sparse coprime geometry for local sensing, while the remaining elements passively reflect signals. This simultaneous sensing and reflection significantly improves accuracy over fully passive architectures. The method leverages Khatri-Rao and Kronecker factorizations to efficiently decouple the cascaded channel at the base station. Furthermore, spatial smoothing resolves the coprime array rank deficiency, enabling robust angular extraction via Root-MUSIC. Simulations demonstrate highly resilient estimation performance across scenarios.

0.22

TRACE: A Modular Framework for RIS-Assisted Channel Estimation and Differential Channel-Aware Reconfiguration

eess.SP eess.SY ·2026-08-12 ·Smriti Kumar, Mansi Ambwani, Arzad Alam Kherani, Vimal Bhatia
similarity 0.58
Abstract · 14 pages, 18 figures, Submitted to IEEE TCoM for review on 18th July 2026

Reconfigurable Intelligent Surface (RIS) research tightly couples channel-estimation, control and communication, yet existing implementations often rely on fixed algorithmic pipelines, making it difficult to compare alternative estimation, tracking and communication strategies under identical conditions and to study low-overhead RIS adaptation under time-varying channels. This paper addresses both challenges through two complementary contributions. First, it presents TRACE (Toolkit for RIS-assisted channel-estimation, adaptive control and communication experimentation), a modular socket-based framework that decouples the transmitter, radio environment, controller and receiver through separate control- and data-plane interfaces, enabling reproducible evaluation across substitutable modules. Second, it proposes the differential channel-aware RIS update (DCAR) algorithm, which estimates channel perturbations from reduced probe observations using a regularized differential update to reduce retraining overhead. TRACE is validated through interchangeable minimum mean square error and orthogonal matching pursuit channel-estimation, Gaussian random walk and Gauss--Markov channel evolution, BPSK, QPSK and 16-QAM modulation techniques and multiple RIS sizes, without modifying the underlying framework. Within TRACE, DCAR is observed to reduce pilot overhead and computational complexity while maintaining beamforming performance close to Kalman-filter-based tracking under time-varying channels.

0.12

Structured Channel Parameter Estimation for RIS-Assisted MIMO Systems via Kronecker and Tensor Factorizations

eess.SP ·2026-09-17 ·Melryllin G. O. Sousa, Jean C. S. Ferreira, Fazal-E Asim
publishedbenchmark similarity 0.58
Abstract

This paper proposes structured channel-parameter estimators for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) systems employing uniform rectangular arrays under line-of-sight propagation. By exploiting the Kronecker and multilinear structures of the cascaded channel, we introduce the Successive Kronecker Factorization (SKF) alongside two Third-Order Tensor Parameter Estimation (TOPE) methods: TOPE-ALS and TOPE-HOSVD. These estimators recover spatial signatures from the pilot-filtered signal matrix, and then decouple the corresponding horizontal and vertical spatial frequencies. This structured formulation achieves benchmark estimation accuracy while reducing computational complexity, offering a efficient solution for RIS-aided systems.

0.25

RIS Configuration with Low-Overhead Measurements via Physics-Guided Neural Networks

eess.SP ·2026-10-20 ·Son Dinh-Van, Matthew D. Higgins
similarity 0.58
Abstract

This paper studies reconfigurable intelligent surface (RIS) configuration for a single-input single-output (SISO) communication link using a two-stage estimate-then-optimize procedure. Within this framework, two common approaches to the estimation stage are pilot-based channel estimation and received signal strength (RSS)-based channel estimation. Our hardware experiments reveal substantial inter-block phase evolution consistent with residual CFO, while simulations show that such phase rotations can severely degrade pilot-based channel estimation when left uncompensated. In contrast, RSS-based approaches are less affected by these phase rotations, although they often require a large number of measurements to achieve a near-optimal received signal-to-noise ratio (SNR). To address this measurement requirement, we propose parametric physics-guided neural blind beamforming (\textsc{P-PGNBB}) for RSS-based channel estimation. Simulations and hardware experiments confirm that the proposed method achieves a received SNR close to that obtained with perfect channel state information (CSI) and comparable to existing methods, while requiring substantially fewer RSS measurements.

0.20

Semi-Blind Channel Estimation for Dynamic NTN Systems via Spiked Random Matrix Theory

eess.SP ·2026-08-26 ·Xue Zhang, Abla Kammoun, Mohamed-Slim Alouini
similarity 0.57
Abstract

Semi-blind channel estimation offers an attractive tradeoff between pilot overhead and estimation accuracy in large-scale wireless systems. However, reliable channel acquisition becomes particularly challenging in highly dynamic environments such as non-terrestrial networks (NTNs), where rapidly varying channels and high system dimensionality significantly degrade the performance of conventional covariance-based estimators due to sampling noise. In this paper, we propose a robust semi-blind channel estimation framework for multi-user uplink systems operating in NTN systems. The proposed approach introduces an optimally regularized least-squares formulation that balances training-based information and blind subspace structure. By exploiting the spiked covariance model within a random matrix theory (RMT) framework, we derive a closed-form characterization of the resulting channel mean-squared error and obtain an analytically tractable design of the optimal regularization parameter. The resulting estimator is computationally efficient and particularly well suited to high-dimensional regimes. Simulation results under realistic Third Generation Partnership Project (3GPP) NTN channel models demonstrate substantial performance improvements over conventional semi-blind and training-based estimators.

0.22

Low-Complexity Neural Pursuit for Line Spectral Estimation

eess.SP ·2026-09-19 ·Chenchen Liu, Wenjun Jiang, Xiaojun Yuan
top venuetheory similarity 0.56
Abstract

In this paper, we propose a high-precision yet low-complexity framework, termed Neural Pursuit for Line Spectral Estimation (NeuPLSE), for off-grid line spectral estimation from a single snapshot. The proposed framework systematically integrates model-driven signal structures with data-driven adaptability, enabling continuous-domain spectral representation together with adaptive parameter learning. Within this framework, model order detection and spectral parameter estimation are jointly achieved through residual analysis, with coordinated use of global and generalized component-wise residual information to ensure robust and accurate estimation performance. Moreover, NeuPLSE supports a unified extension from one-dimensional (1D) to multi-dimensional (MD) scenarios while maintaining low computational complexity. Extensive simulations in representative integrated sensing and communication (ISAC) scenarios demonstrate that NeuPLSE achieves accurate model order detection and high-precision spectral estimation. In sparse-path settings, it approaches the Cramér-Rao lower bound, while in dense-path settings, it attains competitive reconstruction performance with significantly lower computational complexity than state-of-the-art methods.

0.36