CS Paper Radar

Structured Channel Parameter Estimation for RIS-Assisted MIMO Systems via Kronecker and Tensor Factorizations

Melryllin G. O. Sousa, Jean C. S. Ferreira, Fazal-E Asim

eess.SP ·submitted 2026-09-17 20:46 UTC · v1
publishedbenchmark

Abstract

This paper proposes structured channel-parameter estimators for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) systems employing uniform rectangular arrays under line-of-sight propagation. By exploiting the Kronecker and multilinear structures of the cascaded channel, we introduce the Successive Kronecker Factorization (SKF) alongside two Third-Order Tensor Parameter Estimation (TOPE) methods: TOPE-ALS and TOPE-HOSVD. These estimators recover spatial signatures from the pilot-filtered signal matrix, and then decouple the corresponding horizontal and vertical spatial frequencies. This structured formulation achieves benchmark estimation accuracy while reducing computational complexity, offering a efficient solution for RIS-aided systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Simultaneous Direct and Indirect Channel Estimation for RIS-Assisted MIMO Communications

eess.SP ·2026-10-08 ·Daniel V. C. de Oliveira, Daniel C. Alcantara, Fazal. E Asim, Andre L. F. de Almeida, Gabor Fodor
publishedtheory similarity 0.81
Abstract

This paper introduces an enhanced channel estimation method for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) communications. Considering the presence of both the direct link from the base station (BS) to the user equipment (UE) and the indirect link \textit{via} the RIS, we formulate a tensor-based receiver for joint direct and indirect channel estimation called the TenDICE algorithm. The proposed receiver relies on an extended parallel factor analysis (PARAFAC) tensor model for the received pilot signals, from which the involved (direct and indirect link) channels are estimated using a simple alternating least squares scheme. The proposed TenDICE method is compared with the state-of-the-art least squares (LS) method, Khatri-Rao factorization (KRF) method, enhanced trilinear alternating least squares (E-TALS), and the theoretical Cramér-Rao lower bound (CRLB) based on normalized mean square error (NMSE) and spectral efficiency (SE). The proposed TenDICE outperforms the LS and E-TALS methods and performs similarly to the KRF methods while estimating the direct channel.

0.37

Channel Estimation for Movable Antenna Systems: Challenges, Solutions, and Opportunities

eess.SP ·2026-09-12 ·Linchu Chen, Zhendong Li, Zile Zou, Zhou Su, Lin Chen +3 more
similarity 0.74
Abstract

Movable antenna (MA) has emerged as a promising technology for future wireless networks by exploiting channel variation over local antenna movement regions. However, accurate and efficient channel acquisition in MA systems remains challenging due to the trade-off between estimation accuracy and computational complexity. In this article, the MA channel model and the associated estimation framework are first reviewed, where channel information over the movement region is reconstructed from finite measurements by exploiting shared path parameters. The structured dependence of MA observations across space, time, and frequency naturally motivates the adoption of tensor-based modeling for channel estimation. Subsequently, we discuss the tensor-based signal model and corresponding parameter estimation methods from multidimensional observations. These methods are further compared with conventional channel estimation methods in terms of estimation accuracy, computational complexity, and general applicability. Furthermore, a representative case study is provided to illustrate the performance and characteristics of different algorithms under MA channel estimation settings. Finally, some future research directions for tensor decomposition-based channel estimation in MA systems are outlined.

0.17

Low-Complexity Tensor-Based Channel Parameter Estimation for mmWave MIMO-Assisted Systems

eess.SP ·2026-10-08 ·Francisco I. T. Pires, Jean C. S. Ferreira, Fazal-E Asim
publishedtheory similarity 0.74
Abstract

This paper presents a low-complexity tensor-based channel estimation framework for downlink mmWave massive MIMO systems using passive Butler-matrix beamforming. By modeling received signals as a third-order PARAFAC tensor, we exploit known pilot structures via bilinear alternating least-squares (BALS) optimization to reduce computational overhead. The decoupled spatial factors are then processed via 1D and 2D ESPRIT to extract angles of arrival and departure with automatic pairing. Additionally, we derive the Cramer--Rao lower bound (CRLB) for this architecture. Simulations confirm the proposed estimator outperforms conventional least-squares, achieving accurate channel reconstruction and approaching the CRLB at moderate-to-high signal-to-noise ratios.

0.21

Multiuser Channel Estimation in FIM Systems: A Structured Block Term Decomposition Approach

eess.SP ·2026-10-21 ·Xi Han, Junqiao Chen, André L. F. de Almeida, George C. Alexandropoulos
similarity 0.67
Abstract

Flexible intelligent metasurfaces (FIMs) create geometry-dependent array responses that provide spatial diversity but complicate multiuser channel estimation. This paper studies uplink estimation using pilot observations collected under multiple prescribed and calibrated morphing configurations. Each user contributes a matrix--vector block that couples its diagonal reference-array response with its morphing-dependent phases, while its third-mode vector is the known pilot scaled by the complex channel gain. We develop a pilot-constrained structured block term decomposition (BTD) estimator whose alternating least-squares updates exploit both the known pilot directions and the diagonal spatial factors. The undeformed configuration sets the columnwise scaling convention, and a unit first-entry normalization assigns the remaining block scale to the channel gain. Matching the recovered factors to the calibrated spatial--morphing manifold then yields the physical angles and configuration-dependent channels. We characterize the rank conditions for unique conditional least-squares updates, distinguish these conditions from global factor and physical-angle identifiability, and summarize the training, coherence-time, and computational requirements. Simulations show accurate two-dimensional angle and channel recovery in the tested settings, equal total pilot-symbol overhead in rigid-panel comparisons, improved steering-vector estimates as morphing diversity increases, and degradation as user loading or pilot correlation increases.

0.22

Training-Efficient Channel Estimation for the Multiuser Uplink Relying on Generalized Flexible Intelligent Metasurfaces

eess.SP ·2026-10-21 ·Daniel C. Araújo, André L. F. de Almeida, Lajos Hanzo
similarity 0.67
Abstract

We consider uplink multiuser channel estimation for a generalized flexible intelligent metasurface at the base station, under narrowband far-field propagation and a twin-time-scale mechanical protocol: on the slow time-scale the panel translates rigidly over a planar grid, while on the fast time-scale the surface morphs along its normal direction. From orthogonal multiuser pilots, we show that each user's channel admits a fourth-order canonical polyadic tensor structure. We develop two complementary estimators: alternating least squares factorization followed by paired rotational-invariance wavevector extraction, and a tensor spatial-smoothing multiple signal classification estimator that preserves the multilinear array manifold. Both share a minimum description length front-end for automatic tensor-rank detection. We derive Kruskal identifiability conditions that relate the numbers of elements, morphing states and grid positions to the maximum number of recoverable multipath components, and show that the tensor model reconstructs the channel at panel configurations beyond the training grid. This prediction capability drives a configuration-selective multiuser transmit precoder that searches the entire motion grid without additional pilot overhead. Numerical results confirm the identifiability limits and show that, once the model order is resolved, the configuration search makes the same choice from estimated as from perfect channel state information. The reconfiguration gain over a fixed panel of identical aperture and training budget grows with the user load, and fast morphing proves valuable for conditioning the tensor factorization rather than as a source of beamforming gain.

0.27

Low-Complexity Channel Parameter Estimation for Coprime HRIS-Assisted MIMO Systems

eess.SP ·2026-08-13 ·Jean C. S. Ferreira, Melryllin G. O. Sousa, Fazal-E Asim
published similarity 0.66
Abstract

This paper proposes a parameter estimation scheme for uplink MIMO systems assisted by a Hybrid Reconfigurable Intelligent Surface (HRIS). To reduce hardware complexity, the HRIS employs a small number of active elements arranged in a sparse coprime geometry for local sensing, while the remaining elements passively reflect signals. This simultaneous sensing and reflection significantly improves accuracy over fully passive architectures. The method leverages Khatri-Rao and Kronecker factorizations to efficiently decouple the cascaded channel at the base station. Furthermore, spatial smoothing resolves the coprime array rank deficiency, enabling robust angular extraction via Root-MUSIC. Simulations demonstrate highly resilient estimation performance across scenarios.

0.22

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

eess.SP ·2026-09-10 ·Lei Yao, Yin Xu, Aimin Tang, Taohe Chen, Tianyao Ma +1 more
similarity 0.66
Abstract

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

0.22

PARAFAC-Based Low-Latency Angular Tracking for RIS-Assisted Sensing

eess.SP ·2026-09-23 ·Kenneth Benício, André L. F. de Almeida, Bruno Sokal, Fazal-E Asim, Gabor Fodor +1 more
similarity 0.65
Abstract

This paper proposes adaptive tensor tracking for angular trajectories (ATTRACT), a structure-aware alternating least squares algorithm for low-latency target tracking in reconfigurable intelligent surface (RIS)-assisted sensing. The received echo is represented as a dynamic third-order PARAFAC tensor that separates angular, delay, and Doppler information. Unlike batch tensor estimators, ATTRACT processes one data slice at a time and carries forward the preceding factor estimates, avoiding the need to collect an entire sensing window before updating the target state. Its distinguishing feature is the integration of delay and Doppler structure into each iterative update through the known transmitter-RIS channel, pilot signals, and RIS configurations. Numerical results show that, for a large enough RIS, ATTRACT achieves accuracy comparable to the offline tensor baseline at high signal-to-noise ratios while reducing computational overhead and providing slot-wise estimates.

0.18