CS Paper Radar

PARAFAC-Based Low-Latency Angular Tracking for RIS-Assisted Sensing

Kenneth Benício, André L. F. de Almeida, Bruno Sokal, Fazal-E Asim, Gabor Fodor, A. Lee Swindlehurst

eess.SP ·submitted 2026-09-23 15:16 UTC · v1

Abstract

This paper proposes adaptive tensor tracking for angular trajectories (ATTRACT), a structure-aware alternating least squares algorithm for low-latency target tracking in reconfigurable intelligent surface (RIS)-assisted sensing. The received echo is represented as a dynamic third-order PARAFAC tensor that separates angular, delay, and Doppler information. Unlike batch tensor estimators, ATTRACT processes one data slice at a time and carries forward the preceding factor estimates, avoiding the need to collect an entire sensing window before updating the target state. Its distinguishing feature is the integration of delay and Doppler structure into each iterative update through the known transmitter-RIS channel, pilot signals, and RIS configurations. Numerical results show that, for a large enough RIS, ATTRACT achieves accuracy comparable to the offline tensor baseline at high signal-to-noise ratios while reducing computational overhead and providing slot-wise estimates.

Closest papers

Nearest neighbours by meaning across the whole index.

Structured Channel Parameter Estimation for RIS-Assisted MIMO Systems via Kronecker and Tensor Factorizations

eess.SP ·2026-09-17 ·Melryllin G. O. Sousa, Jean C. S. Ferreira, Fazal-E Asim
publishedbenchmark similarity 0.65
Abstract

This paper proposes structured channel-parameter estimators for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) systems employing uniform rectangular arrays under line-of-sight propagation. By exploiting the Kronecker and multilinear structures of the cascaded channel, we introduce the Successive Kronecker Factorization (SKF) alongside two Third-Order Tensor Parameter Estimation (TOPE) methods: TOPE-ALS and TOPE-HOSVD. These estimators recover spatial signatures from the pilot-filtered signal matrix, and then decouple the corresponding horizontal and vertical spatial frequencies. This structured formulation achieves benchmark estimation accuracy while reducing computational complexity, offering a efficient solution for RIS-aided systems.

0.25

Simultaneous Direct and Indirect Channel Estimation for RIS-Assisted MIMO Communications

eess.SP ·2026-10-08 ·Daniel V. C. de Oliveira, Daniel C. Alcantara, Fazal. E Asim, Andre L. F. de Almeida, Gabor Fodor
publishedtheory similarity 0.57
Abstract

This paper introduces an enhanced channel estimation method for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) communications. Considering the presence of both the direct link from the base station (BS) to the user equipment (UE) and the indirect link \textit{via} the RIS, we formulate a tensor-based receiver for joint direct and indirect channel estimation called the TenDICE algorithm. The proposed receiver relies on an extended parallel factor analysis (PARAFAC) tensor model for the received pilot signals, from which the involved (direct and indirect link) channels are estimated using a simple alternating least squares scheme. The proposed TenDICE method is compared with the state-of-the-art least squares (LS) method, Khatri-Rao factorization (KRF) method, enhanced trilinear alternating least squares (E-TALS), and the theoretical Cramér-Rao lower bound (CRLB) based on normalized mean square error (NMSE) and spectral efficiency (SE). The proposed TenDICE outperforms the LS and E-TALS methods and performs similarly to the KRF methods while estimating the direct channel.

0.37

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

eess.SP ·2026-09-10 ·Lei Yao, Yin Xu, Aimin Tang, Taohe Chen, Tianyao Ma +1 more
similarity 0.56
Abstract

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

0.22

Adaptive Payload-Aided Near-Field Beam Tracking via Thompson Sampling

eess.SP ·2026-08-22 ·Junchi Liu, Zijun Wang, Shawn Tsai, Rui Zhang
published similarity 0.56
Abstract · Abstract shortened in the arXiv metadata due to the 1,920-character limit; the full abstract appears in the manuscript

Extremely large antenna arrays at high frequencies substantially extend the radiative near-field region in 6G networks, making mobile beam alignment depend jointly on user angle and range. The added range dimension enlarges the beam-search space, making repeated pilot-based sweeping costly under mobility, while sensing-assisted tracking depends on propagation conditions, echo quality, and target reflectivity. We propose an adaptive payload-aided near-field beam-tracking framework based on maximum likelihood estimation (MLE) and Thompson sampling (TS). Selected received payload samples are fed back and reused as tracking observations, avoiding dedicated beam-sweeping symbols during tracking. Within each sliding window, local angle and range trajectories are modeled by low-order polynomials to capture velocity, acceleration, and higher-order motion variations, and are estimated by MLE using the spherical-wave channel model. A local Gaussian approximation centered at the MLE, with covariance from the inverse observed Fisher information, represents trajectory uncertainty. For payload transmissions selected for feedback, TS samples a trajectory hypothesis and maps it to a payload beam toward the sampled state, while the remaining transmissions use the MLE-predicted beam. To handle nonstationary mobility, an asymptotic chi-square characterization of in-window estimation risk motivates joint adaptation of observation-window length and polynomial degree, while online residual statistics adjust the update interval and feedback ratio. The framework is also extended to uniform planar arrays with elevation tracking. Simulations under smooth and sharp-turn trajectories show high payload-accounted mean normalized beamforming gain, low normalized-gain variance, and high effective-symbol reliability, while the adaptive mechanism provides substantial robustness under nonstationary sharp-turn mobility.

0.23

Practical Hardware-Efficient ISAC: Enabling Multi-Target Sensing With Few RF Chains

eess.SP ·2026-10-12 ·Zhenkun Zhang, Cunhua Pan, Hong Ren, Jun Tang, Dongming Wang +1 more
theory similarity 0.55
Abstract

Hybrid analog--digital arrays reduce hardware cost in integrated sensing and communications (ISAC), but spatial compression and beam-dependent scan responses complicate multi-target estimation with few radio-frequency (RF) chains. To address these challenges, this paper proposes a burst beam-scanning multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) framework that reuses downlink reference signals for joint range, radial-velocity, elevation, and azimuth estimation. Specifically, a structured global--local dual-tensor estimator separates targets by using scanning observations and refines their parameters from selected-beam RF-chain responses, with delay--Doppler signatures maintaining cross-stage target correspondence. The recovered subarray responses yield closed-form elevation and azimuth estimates through exact sum--difference relations, avoiding small-angle approximations and fine angular grid searches. To further improve Doppler accuracy, spatial-mask-aided weighted least squares exploits the longer inter-burst temporal aperture while resolving phase ambiguity using intra-burst estimates. The joint multi-target Cramér--Rao lower bound (CRLB) and corresponding three-dimensional (3D) positioning bound are also derived to characterize estimation performance. Simulation results show that the proposed scheme achieves near-CRLB estimation accuracy at high transmit powers and centimeter- to millimeter-level 3D positioning with only four RF chains, while maintaining low computational cost.

0.12

Low-Complexity Neural Pursuit for Line Spectral Estimation

eess.SP ·2026-09-19 ·Chenchen Liu, Wenjun Jiang, Xiaojun Yuan
top venuetheory similarity 0.53
Abstract

In this paper, we propose a high-precision yet low-complexity framework, termed Neural Pursuit for Line Spectral Estimation (NeuPLSE), for off-grid line spectral estimation from a single snapshot. The proposed framework systematically integrates model-driven signal structures with data-driven adaptability, enabling continuous-domain spectral representation together with adaptive parameter learning. Within this framework, model order detection and spectral parameter estimation are jointly achieved through residual analysis, with coordinated use of global and generalized component-wise residual information to ensure robust and accurate estimation performance. Moreover, NeuPLSE supports a unified extension from one-dimensional (1D) to multi-dimensional (MD) scenarios while maintaining low computational complexity. Extensive simulations in representative integrated sensing and communication (ISAC) scenarios demonstrate that NeuPLSE achieves accurate model order detection and high-precision spectral estimation. In sparse-path settings, it approaches the Cramér-Rao lower bound, while in dense-path settings, it attains competitive reconstruction performance with significantly lower computational complexity than state-of-the-art methods.

0.36

TRACE: A Modular Framework for RIS-Assisted Channel Estimation and Differential Channel-Aware Reconfiguration

eess.SP eess.SY ·2026-08-12 ·Smriti Kumar, Mansi Ambwani, Arzad Alam Kherani, Vimal Bhatia
similarity 0.53
Abstract · 14 pages, 18 figures, Submitted to IEEE TCoM for review on 18th July 2026

Reconfigurable Intelligent Surface (RIS) research tightly couples channel-estimation, control and communication, yet existing implementations often rely on fixed algorithmic pipelines, making it difficult to compare alternative estimation, tracking and communication strategies under identical conditions and to study low-overhead RIS adaptation under time-varying channels. This paper addresses both challenges through two complementary contributions. First, it presents TRACE (Toolkit for RIS-assisted channel-estimation, adaptive control and communication experimentation), a modular socket-based framework that decouples the transmitter, radio environment, controller and receiver through separate control- and data-plane interfaces, enabling reproducible evaluation across substitutable modules. Second, it proposes the differential channel-aware RIS update (DCAR) algorithm, which estimates channel perturbations from reduced probe observations using a regularized differential update to reduce retraining overhead. TRACE is validated through interchangeable minimum mean square error and orthogonal matching pursuit channel-estimation, Gaussian random walk and Gauss--Markov channel evolution, BPSK, QPSK and 16-QAM modulation techniques and multiple RIS sizes, without modifying the underlying framework. Within TRACE, DCAR is observed to reduce pilot overhead and computational complexity while maintaining beamforming performance close to Kalman-filter-based tracking under time-varying channels.

0.12

Low-Complexity Tensor-Based Channel Parameter Estimation for mmWave MIMO-Assisted Systems

eess.SP ·2026-10-08 ·Francisco I. T. Pires, Jean C. S. Ferreira, Fazal-E Asim
publishedtheory similarity 0.53
Abstract

This paper presents a low-complexity tensor-based channel estimation framework for downlink mmWave massive MIMO systems using passive Butler-matrix beamforming. By modeling received signals as a third-order PARAFAC tensor, we exploit known pilot structures via bilinear alternating least-squares (BALS) optimization to reduce computational overhead. The decoupled spatial factors are then processed via 1D and 2D ESPRIT to extract angles of arrival and departure with automatic pairing. Additionally, we derive the Cramer--Rao lower bound (CRLB) for this architecture. Simulations confirm the proposed estimator outperforms conventional least-squares, achieving accurate channel reconstruction and approaching the CRLB at moderate-to-high signal-to-noise ratios.

0.21