CS Paper Radar

Channel Estimation for Movable Antenna Systems: Challenges, Solutions, and Opportunities

Linchu Chen, Zhendong Li, Zile Zou, Zhou Su, Lin Chen, Ruoyu Zhang, Qingqing Wu, Wen Chen

eess.SP ·submitted 2026-09-12 04:34 UTC · v1

Abstract

Movable antenna (MA) has emerged as a promising technology for future wireless networks by exploiting channel variation over local antenna movement regions. However, accurate and efficient channel acquisition in MA systems remains challenging due to the trade-off between estimation accuracy and computational complexity. In this article, the MA channel model and the associated estimation framework are first reviewed, where channel information over the movement region is reconstructed from finite measurements by exploiting shared path parameters. The structured dependence of MA observations across space, time, and frequency naturally motivates the adoption of tensor-based modeling for channel estimation. Subsequently, we discuss the tensor-based signal model and corresponding parameter estimation methods from multidimensional observations. These methods are further compared with conventional channel estimation methods in terms of estimation accuracy, computational complexity, and general applicability. Furthermore, a representative case study is provided to illustrate the performance and characteristics of different algorithms under MA channel estimation settings. Finally, some future research directions for tensor decomposition-based channel estimation in MA systems are outlined.

Closest papers

Nearest neighbours by meaning across the whole index.

Low-Complexity Tensor-Based Channel Parameter Estimation for mmWave MIMO-Assisted Systems

eess.SP ·2026-10-08 ·Francisco I. T. Pires, Jean C. S. Ferreira, Fazal-E Asim
publishedtheory similarity 0.74
Abstract

This paper presents a low-complexity tensor-based channel estimation framework for downlink mmWave massive MIMO systems using passive Butler-matrix beamforming. By modeling received signals as a third-order PARAFAC tensor, we exploit known pilot structures via bilinear alternating least-squares (BALS) optimization to reduce computational overhead. The decoupled spatial factors are then processed via 1D and 2D ESPRIT to extract angles of arrival and departure with automatic pairing. Additionally, we derive the Cramer--Rao lower bound (CRLB) for this architecture. Simulations confirm the proposed estimator outperforms conventional least-squares, achieving accurate channel reconstruction and approaching the CRLB at moderate-to-high signal-to-noise ratios.

0.21

Structured Channel Parameter Estimation for RIS-Assisted MIMO Systems via Kronecker and Tensor Factorizations

eess.SP ·2026-09-17 ·Melryllin G. O. Sousa, Jean C. S. Ferreira, Fazal-E Asim
publishedbenchmark similarity 0.74
Abstract

This paper proposes structured channel-parameter estimators for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) systems employing uniform rectangular arrays under line-of-sight propagation. By exploiting the Kronecker and multilinear structures of the cascaded channel, we introduce the Successive Kronecker Factorization (SKF) alongside two Third-Order Tensor Parameter Estimation (TOPE) methods: TOPE-ALS and TOPE-HOSVD. These estimators recover spatial signatures from the pilot-filtered signal matrix, and then decouple the corresponding horizontal and vertical spatial frequencies. This structured formulation achieves benchmark estimation accuracy while reducing computational complexity, offering a efficient solution for RIS-aided systems.

0.25

Simultaneous Direct and Indirect Channel Estimation for RIS-Assisted MIMO Communications

eess.SP ·2026-10-08 ·Daniel V. C. de Oliveira, Daniel C. Alcantara, Fazal. E Asim, Andre L. F. de Almeida, Gabor Fodor
publishedtheory similarity 0.72
Abstract

This paper introduces an enhanced channel estimation method for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) communications. Considering the presence of both the direct link from the base station (BS) to the user equipment (UE) and the indirect link \textit{via} the RIS, we formulate a tensor-based receiver for joint direct and indirect channel estimation called the TenDICE algorithm. The proposed receiver relies on an extended parallel factor analysis (PARAFAC) tensor model for the received pilot signals, from which the involved (direct and indirect link) channels are estimated using a simple alternating least squares scheme. The proposed TenDICE method is compared with the state-of-the-art least squares (LS) method, Khatri-Rao factorization (KRF) method, enhanced trilinear alternating least squares (E-TALS), and the theoretical Cramér-Rao lower bound (CRLB) based on normalized mean square error (NMSE) and spectral efficiency (SE). The proposed TenDICE outperforms the LS and E-TALS methods and performs similarly to the KRF methods while estimating the direct channel.

0.38

Tensor Decomposition-Based Wireless Sensing for MIMO-OFDM ISAC via Flexible Spatial-Temporal-Spectral Optimization

eess.SP ·2026-08-16 ·Chengzhi Ye, Ruoyu Zhang, Lei Yao, Xinrong Guan, Yu Zhang +2 more
similarity 0.70
Abstract

Integrated sensing and communication (ISAC) is regarded as a key enabling technique in future 6th-generation (6G) mobile communication systems. However, existing multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) ISAC designs generally rely on the fixed-position antennas and fixed allocation of time-frequency resources, thereby limiting the degrees of freedom of wireless sensing along the spatial-temporal-spectral dimensions. In this paper, we propose a novel wireless sensing framework for MIMO-OFDM ISAC systems with flexible spatial-temporal-spectral optimization and propose a tensor decomposition-based approach to estimate target parameters, including azimuth/elevation angles, ranges, and velocities. Specifically, we first establish a monostatic wireless sensing model for MIMO-OFDM ISAC systems, where the positions of antenna elements, the allocation of OFDM symbols and subcarriers can be flexibly configured. Then, we formulate the problem of estimating target parameters as a tensor decomposition problem admitting to the canonical polyadic format, which enables the parallel target parameters estimation process from corresponding factor matrices along the spatial, temporal, and spectral dimensions, respectively. Based on the decomposed factor matrices, we derive the Cramer-Rao Bound (CRB) for the unknown target parameters and reveal that the estimation accuracy of azimuth/elevation angles, velocities and ranges is fundamentally determined by the array geometry, the distribution of OFDM symbols and subcarriers. Building on this insight, we obtain an optimized solution for the positions of antenna elements, and optimal solutions for the subcarrier allocation and OFDM symbol allocation to minimize the CRB, as well as the mean square error of target parameters estimation.

0.41

Sparse Array-Inspired Frame Structure Design for 5G NR ISAC

eess.SP ·2026-11-06 ·Haisu Wu, Hong Ren, Cunhua Pan, Yuqing Chen, Ruizhe Wang +3 more
similarity 0.67
Abstract · 16 pages, 7 figures, 2 tables

Integrated sensing and communication (ISAC) has emerged as a promising paradigm for future wireless networks. However, the extensive occupation of time-frequency resources for sensing limits the communication capacity. To address the resource conflict, this paper proposes a novel sparse sensing frame structure aligned with the 5G new radio (5G NR) resource grid at the slot and physical resource block (PRB) levels through a predefined sensing-pattern block. Specifically, inspired by the design of two-dimensional (2D) sparse antenna arrays, we map the sparse spatial geometries onto the time-frequency resource grid. By leveraging the hole-free property of the difference coarray, we eliminate the range-velocity ambiguity and cast the sensing signals into a reconstructed higher-order tensor representation. For efficient parameter estimation, we propose a novel binary-tree-based tensor train decomposition (BT-TTD) algorithm that extracts lower-dimensional tensor train cores (TT-cores) and executes a Vandermonde-prior-guided rectified alternating least squares (RecALS) algorithm. Simulation results validate that the proposed scheme achieves competitive estimation accuracy with reduced complexity. Furthermore, we investigate the topological properties of various sparse patterns, revealing the inherent trade-off among sensing accuracy, resource occupancy, and computational complexity.

0.19

Movable Antenna Aided Robust Wireless Transmission: From Model-Based Optimization to Scalable Reinforcement Learning

eess.SP ·2026-11-03 ·Jinshuo Zhang, Yafei Wang, Hongwei Hou, Wenjin Wang, Shi Jin +2 more
hot direction similarity 0.67
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

This paper investigates robust joint antenna positioning and precoding for multiuser movable antenna (MA) systems under imperfect channel state information (CSI). First, we identify the mismatch between the spatial statistics of densely sampled MA channels and the discrete Fourier transform (DFT) basis used for conventional robust precoding. To address this, we develop a novel discrete prolate spheroidal sequence (DPSS)-based a posteriori channel model. By exploiting the spatial covariance structure of MA channels, this model is better suited to modeling MA channel uncertainty. Building on this model, we develop an efficient iterative algorithm for robust joint antenna positioning and precoding to maximize the expected sum rate. By transforming the coupled optimization of antenna positioning and precoding at each iteration into direct comparisons of closed-form scores, we design a low-complexity position replacement scheme that effectively reuses matrix computations across candidate sets. To further improve efficiency and scalability, we exploit the inherent tensor equivariance (TE) of the problem to develop a reinforcement learning framework. To explicitly account for channel uncertainty, we develop novel pairwise user-interaction and CSI-conditioned equivariant attention mechanisms to encode channel statistics and adaptively fuse them with the available CSI. We further introduce distance-biased spatial attention to incorporate the geometry of candidate positions into attention weighting, thereby enhancing spatial feature learning. Simulation results show that the proposed methods improve sum-rate performance while reducing online runtime under imperfect CSI. These methods also achieve near-optimal performance under perfect CSI, closely matching the exhaustive-search method. Moreover, the learning framework generalizes across different numbers of users and MAs without retraining.

0.30

Training-Efficient Channel Estimation for the Multiuser Uplink Relying on Generalized Flexible Intelligent Metasurfaces

eess.SP ·2026-10-21 ·Daniel C. Araújo, André L. F. de Almeida, Lajos Hanzo
similarity 0.65
Abstract

We consider uplink multiuser channel estimation for a generalized flexible intelligent metasurface at the base station, under narrowband far-field propagation and a twin-time-scale mechanical protocol: on the slow time-scale the panel translates rigidly over a planar grid, while on the fast time-scale the surface morphs along its normal direction. From orthogonal multiuser pilots, we show that each user's channel admits a fourth-order canonical polyadic tensor structure. We develop two complementary estimators: alternating least squares factorization followed by paired rotational-invariance wavevector extraction, and a tensor spatial-smoothing multiple signal classification estimator that preserves the multilinear array manifold. Both share a minimum description length front-end for automatic tensor-rank detection. We derive Kruskal identifiability conditions that relate the numbers of elements, morphing states and grid positions to the maximum number of recoverable multipath components, and show that the tensor model reconstructs the channel at panel configurations beyond the training grid. This prediction capability drives a configuration-selective multiuser transmit precoder that searches the entire motion grid without additional pilot overhead. Numerical results confirm the identifiability limits and show that, once the model order is resolved, the configuration search makes the same choice from estimated as from perfect channel state information. The reconfiguration gain over a fixed panel of identical aperture and training budget grows with the user load, and fast morphing proves valuable for conditioning the tensor factorization rather than as a source of beamforming gain.

0.27

Geometry-Aware Channel Aging in MIMO Systems: When Is Kronecker Separability Enough?

eess.SP ·2026-11-05 ·Steven Rivetti, Gabor Fodor, Emil Bjornson, Mikael Skoglund
similarity 0.65
Abstract · 5 pages, 3 figures. Submitted to IEEE Wireless Communication Letters

This letter investigates when Kronecker-separable spatial correlation approximates the covariance of multiple-input-multiple-output (MIMO) channels. We propose a geometry-aware channel model in which the same propagation environment determines both the Weischelberger spatial coupling matrix and the temporal correlation coefficient. The propagation environment follows a 3GPP-inspired clustered channel model. We consider a MIMO system affected by symbol-level channel aging caused by the user equipment's mobility. We schedule both uplink and downlink pilots, thereby deriving the respective spectral efficiencies (SEs) in the presence of imperfect channel state information. Numerical results show that channel aging's magnitude is strongly geometry-dependent, with diffuse propagation inducing greater temporal decorrelation and SE degradation than concentrated scattering. The results also identify regimes where Kronecker separability can be applied and regimes where geometry-aware Weischelberger coupling is needed.

0.31