CS Paper Radar

Sparse Array-Inspired Frame Structure Design for 5G NR ISAC

Haisu Wu, Hong Ren, Cunhua Pan, Yuqing Chen, Ruizhe Wang, Jun Tang, Dongming Wang, Jiangzhou Wang

eess.SP ·submitted 2026-11-06 14:53 UTC · v1

Abstract

Integrated sensing and communication (ISAC) has emerged as a promising paradigm for future wireless networks. However, the extensive occupation of time-frequency resources for sensing limits the communication capacity. To address the resource conflict, this paper proposes a novel sparse sensing frame structure aligned with the 5G new radio (5G NR) resource grid at the slot and physical resource block (PRB) levels through a predefined sensing-pattern block. Specifically, inspired by the design of two-dimensional (2D) sparse antenna arrays, we map the sparse spatial geometries onto the time-frequency resource grid. By leveraging the hole-free property of the difference coarray, we eliminate the range-velocity ambiguity and cast the sensing signals into a reconstructed higher-order tensor representation. For efficient parameter estimation, we propose a novel binary-tree-based tensor train decomposition (BT-TTD) algorithm that extracts lower-dimensional tensor train cores (TT-cores) and executes a Vandermonde-prior-guided rectified alternating least squares (RecALS) algorithm. Simulation results validate that the proposed scheme achieves competitive estimation accuracy with reduced complexity. Furthermore, we investigate the topological properties of various sparse patterns, revealing the inherent trade-off among sensing accuracy, resource occupancy, and computational complexity.

Comment
16 pages, 7 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Tensor Decomposition-Based Wireless Sensing for MIMO-OFDM ISAC via Flexible Spatial-Temporal-Spectral Optimization

eess.SP ·2026-08-16 ·Chengzhi Ye, Ruoyu Zhang, Lei Yao, Xinrong Guan, Yu Zhang +2 more
similarity 0.70
Abstract

Integrated sensing and communication (ISAC) is regarded as a key enabling technique in future 6th-generation (6G) mobile communication systems. However, existing multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) ISAC designs generally rely on the fixed-position antennas and fixed allocation of time-frequency resources, thereby limiting the degrees of freedom of wireless sensing along the spatial-temporal-spectral dimensions. In this paper, we propose a novel wireless sensing framework for MIMO-OFDM ISAC systems with flexible spatial-temporal-spectral optimization and propose a tensor decomposition-based approach to estimate target parameters, including azimuth/elevation angles, ranges, and velocities. Specifically, we first establish a monostatic wireless sensing model for MIMO-OFDM ISAC systems, where the positions of antenna elements, the allocation of OFDM symbols and subcarriers can be flexibly configured. Then, we formulate the problem of estimating target parameters as a tensor decomposition problem admitting to the canonical polyadic format, which enables the parallel target parameters estimation process from corresponding factor matrices along the spatial, temporal, and spectral dimensions, respectively. Based on the decomposed factor matrices, we derive the Cramer-Rao Bound (CRB) for the unknown target parameters and reveal that the estimation accuracy of azimuth/elevation angles, velocities and ranges is fundamentally determined by the array geometry, the distribution of OFDM symbols and subcarriers. Building on this insight, we obtain an optimized solution for the positions of antenna elements, and optimal solutions for the subcarrier allocation and OFDM symbol allocation to minimize the CRB, as well as the mean square error of target parameters estimation.

0.41

Channel Estimation for Movable Antenna Systems: Challenges, Solutions, and Opportunities

eess.SP ·2026-09-12 ·Linchu Chen, Zhendong Li, Zile Zou, Zhou Su, Lin Chen +3 more
similarity 0.67
Abstract

Movable antenna (MA) has emerged as a promising technology for future wireless networks by exploiting channel variation over local antenna movement regions. However, accurate and efficient channel acquisition in MA systems remains challenging due to the trade-off between estimation accuracy and computational complexity. In this article, the MA channel model and the associated estimation framework are first reviewed, where channel information over the movement region is reconstructed from finite measurements by exploiting shared path parameters. The structured dependence of MA observations across space, time, and frequency naturally motivates the adoption of tensor-based modeling for channel estimation. Subsequently, we discuss the tensor-based signal model and corresponding parameter estimation methods from multidimensional observations. These methods are further compared with conventional channel estimation methods in terms of estimation accuracy, computational complexity, and general applicability. Furthermore, a representative case study is provided to illustrate the performance and characteristics of different algorithms under MA channel estimation settings. Finally, some future research directions for tensor decomposition-based channel estimation in MA systems are outlined.

0.17

Target Sensing in Full-Dimensional MIMO-OFDM ISAC Systems Via Coupled Tensor Decomposition

eess.SP ·2026-10-17 ·Ruoyu Zhang, Tingjie Yang, Tianyu Zhao, Lei Cheng, Shuai Wang +2 more
top venue similarity 0.64
Abstract · 16 pages, 10 figures

Integrated sensing and communication (ISAC) has been recognized as a key enabler for future wireless communication systems. However, existing ISAC designs based on MIMO-OFDM generally fail to fully exploit the spatial degrees of freedom and the communication data payload, resulting in restricted target sensing performance. To cope with this issue, in this paper we propose a novel target sensing method for full-dimensional (FD) MIMO-OFDM ISAC systems based on coupled tensor decomposition. We first characterize the system model of FD MIMO-OFDM ISAC, where the base station employs a large number of antennas in two dimensions and facilitates both sensing and communication via the data payload of OFDM signals. Then, we formulate the problem of estimating target parameters as a coupled canonical polyadic decomposition (CPD) problem, which jointly leverages the echo signals of communication data payload over multiple subcarriers in the frequency domain. The theoretical analysis indicates that the formulated coupled CPD problem possesses a more relaxed uniqueness condition compared with the ordinary CPD problem, thereby enabling more stable target sensing performance through the pure communication data payload in FD MIMO-OFDM ISAC. In addition, we develop a coupled CPD-based target sensing algorithm, where the target parameters, including azimuth and elevation angles, ranges, and velocities, are extracted from the decomposed factor matrices. Numerical results show that the proposed target sensing method achieves a higher success rate and more accurate parameter estimation than existing tensor decomposition methods.

0.35

Recursive Semi-Blind Receivers for Wideband Array Processing

eess.SP ·2026-11-13 ·Eleftherios Kofidis
similarity 0.62
Abstract

Using the commonly employed uniform rectangular array (URA) as an illustrative example, we have recently shown that the block-term tensor decomposition (BTD) model provides a natural representation for the output signal of a multi-dimensional separable sensor array structure in the presence of channel multipath. A palette of effective and efficient semi-blind joint channel estimation/data detection (JCD) algorithms for URA processing, which wed BTD modeling with existing JCD schemes, has thus been developed, and recently extended so as to be applicable in large-scale arrays and/or time-varying environments. However, both the model and the algorithms were based on the assumption of narrowband signals, arriving through paths of effectively the same delay. In this paper, recursive JCD algorithms for wideband sources are developed and evaluated through simulations in a time-varying setting and across different constellation sizes, in comparison with their batch counterparts and the training-only-based solution. They are seen to enjoy the ability to track channel variations and detect the transmitted symbols `on the fly', with the aid of only a short initial training stage.

0.21

Near-Field Channel Estimation via Deep Unfolding for Extremely Large-Scale Antenna Arrays

eess.SP ·2026-11-09 ·Nguyen The Khang, Do Hai Son, Tran Trong Duy, Trung Thanh Le, Viet-Dung Nguyen +4 more
similarity 0.60
Abstract · 6 pages, 7 figures, submitted to the 2026 International Conference on Advanced Technologies for Communications (ATC 2026), Best Paper Award

The Extremely Large-scale Antenna Array (ELAA) has been envisioned as a promising candidate to meet the ambitious demands of 6G. However, this evolution also brings about two primary limitations: high computational complexity caused by large-scale arrays and inherent operation in the near-field region. To address these issues, this work exploits the sparsity of near-field channels in the polar domain and formulates channel estimation as a compressed sensing (CS) problem, thereby enabling estimation with reduced pilot overhead. In particular, we propose a guideline to design a sparsifying codebook for the near-field channel, which is strictly based on a target coherence value. Building on this, we develop a deep unfolding architecture, derived from the iterative solver ISTA, with a hybrid loss, namely Hybrid LISTA. Numerical results demonstrate that our proposed codebook, with comparable complexity, still exhibits improved estimation performance and greater coverage in the near-field region. Moreover, our unfolded model with the hybrid loss consistently delivers better recovery performance over existing estimation schemes.

0.25

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

eess.SP ·2026-09-10 ·Lei Yao, Yin Xu, Aimin Tang, Taohe Chen, Tianyao Ma +1 more
similarity 0.60
Abstract

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

0.22

Completing Radio Map Tensors via Factor Diffusion Posterior Sampling

eess.SP ·2026-10-11 ·Le Xu, Rajesh Shrestha, Xiao Fu
similarity 0.59
Abstract · 19 pages (14 pages of main text and 5 pages of appendix)

Radio map estimation (RME), also known as spectrum cartography, aims to recover radio signal strength across multiple domains (e.g., spatial and spectral domains) from sparse measurements, naturally leading to a tensor completion problem. Recent advances show that deep learning-based generative models can provide data-driven structural constraints for RME, yielding substantial performance improvements over traditional model-based approaches. Diffusion models (DMs) represent the current state of the art in generative modeling and hold strong promise for advancing RME. However, existing diffusion-based RME methods often require extensive training data, necessitate retraining when scenarios or measurement formats change, and lack recoverability guarantees. This paper proposes a latent factor diffusion framework for spatio-spectral radio map tensor completion. By training two independent DMs on single-emitter's spatial loss field and spectral signature and embedding them into the factors of the radio map tensor, the proposed approach enables diffusion posterior sampling-based recovery with reduced training complexity as well as enhanced measurement format/sensing pattern flexibility. Recoverability and sample complexity guarantees under the proposed approach are also established. Numerical experiments validate the effectiveness of the proposed method, showing strong generalization across city environments unseen in training data.

0.21

Low-Complexity Tensor-Based Channel Parameter Estimation for mmWave MIMO-Assisted Systems

eess.SP ·2026-10-08 ·Francisco I. T. Pires, Jean C. S. Ferreira, Fazal-E Asim
publishedtheory similarity 0.59
Abstract

This paper presents a low-complexity tensor-based channel estimation framework for downlink mmWave massive MIMO systems using passive Butler-matrix beamforming. By modeling received signals as a third-order PARAFAC tensor, we exploit known pilot structures via bilinear alternating least-squares (BALS) optimization to reduce computational overhead. The decoupled spatial factors are then processed via 1D and 2D ESPRIT to extract angles of arrival and departure with automatic pairing. Additionally, we derive the Cramer--Rao lower bound (CRLB) for this architecture. Simulations confirm the proposed estimator outperforms conventional least-squares, achieving accurate channel reconstruction and approaching the CRLB at moderate-to-high signal-to-noise ratios.

0.21