CS Paper Radar

Recursive Semi-Blind Receivers for Wideband Array Processing

Eleftherios Kofidis

eess.SP ·submitted 2026-11-13 11:09 UTC · v1

Abstract

Using the commonly employed uniform rectangular array (URA) as an illustrative example, we have recently shown that the block-term tensor decomposition (BTD) model provides a natural representation for the output signal of a multi-dimensional separable sensor array structure in the presence of channel multipath. A palette of effective and efficient semi-blind joint channel estimation/data detection (JCD) algorithms for URA processing, which wed BTD modeling with existing JCD schemes, has thus been developed, and recently extended so as to be applicable in large-scale arrays and/or time-varying environments. However, both the model and the algorithms were based on the assumption of narrowband signals, arriving through paths of effectively the same delay. In this paper, recursive JCD algorithms for wideband sources are developed and evaluated through simulations in a time-varying setting and across different constellation sizes, in comparison with their batch counterparts and the training-only-based solution. They are seen to enjoy the ability to track channel variations and detect the transmitted symbols `on the fly', with the aid of only a short initial training stage.

Closest papers

Nearest neighbours by meaning across the whole index.

Sparse Array-Inspired Frame Structure Design for 5G NR ISAC

eess.SP ·2026-11-06 ·Haisu Wu, Hong Ren, Cunhua Pan, Yuqing Chen, Ruizhe Wang +3 more
similarity 0.62
Abstract · 16 pages, 7 figures, 2 tables

Integrated sensing and communication (ISAC) has emerged as a promising paradigm for future wireless networks. However, the extensive occupation of time-frequency resources for sensing limits the communication capacity. To address the resource conflict, this paper proposes a novel sparse sensing frame structure aligned with the 5G new radio (5G NR) resource grid at the slot and physical resource block (PRB) levels through a predefined sensing-pattern block. Specifically, inspired by the design of two-dimensional (2D) sparse antenna arrays, we map the sparse spatial geometries onto the time-frequency resource grid. By leveraging the hole-free property of the difference coarray, we eliminate the range-velocity ambiguity and cast the sensing signals into a reconstructed higher-order tensor representation. For efficient parameter estimation, we propose a novel binary-tree-based tensor train decomposition (BT-TTD) algorithm that extracts lower-dimensional tensor train cores (TT-cores) and executes a Vandermonde-prior-guided rectified alternating least squares (RecALS) algorithm. Simulation results validate that the proposed scheme achieves competitive estimation accuracy with reduced complexity. Furthermore, we investigate the topological properties of various sparse patterns, revealing the inherent trade-off among sensing accuracy, resource occupancy, and computational complexity.

0.19

Channel Estimation for Movable Antenna Systems: Challenges, Solutions, and Opportunities

eess.SP ·2026-09-12 ·Linchu Chen, Zhendong Li, Zile Zou, Zhou Su, Lin Chen +3 more
similarity 0.62
Abstract

Movable antenna (MA) has emerged as a promising technology for future wireless networks by exploiting channel variation over local antenna movement regions. However, accurate and efficient channel acquisition in MA systems remains challenging due to the trade-off between estimation accuracy and computational complexity. In this article, the MA channel model and the associated estimation framework are first reviewed, where channel information over the movement region is reconstructed from finite measurements by exploiting shared path parameters. The structured dependence of MA observations across space, time, and frequency naturally motivates the adoption of tensor-based modeling for channel estimation. Subsequently, we discuss the tensor-based signal model and corresponding parameter estimation methods from multidimensional observations. These methods are further compared with conventional channel estimation methods in terms of estimation accuracy, computational complexity, and general applicability. Furthermore, a representative case study is provided to illustrate the performance and characteristics of different algorithms under MA channel estimation settings. Finally, some future research directions for tensor decomposition-based channel estimation in MA systems are outlined.

0.17

A Gram-Attention Learning Framework for Spatially Non-Stationary Channel Estimation

eess.SP ·2026-09-22 ·Jiannan Wang, Xianghao Yu, Chenshu Wu
similarity 0.61
Abstract · 13 pages, 10 figures

As next-generation wireless systems migrate to high-frequency bands, extremely large-scale multiple-input multiple-output (XL-MIMO) is indispensable for combating severe path loss. However, the received path energy along the extremely large array aperture (ELAA) may exhibit spatial non-stationarity, rendering the conventional discrete Fourier transform (DFT) codebook inadequate for channel estimation (CE) due to its full-array angular representation. To address this mismatch, we propose a novel joint angle-subarray (JAS) codebook, where each codeword corresponds to an angular direction and a specific subarray. Spatially non-stationary CE is thus transformed into structured sparse support detection in the JAS domain. However, reliable support recovery remains challenging for conventional model-based methods. We therefore develop a signal processing and deep learning co-design framework, where data-driven JAS parallel support detection is followed by least-squares (LS)-based channel reconstruction. The matched filter response of each JAS grid is embedded into a high-dimensional feature vector. We then propose a Gram-attention module that incorporates the Gram matrix as a physical prior to guide feature purification, enabling the network to suppress leakage-related components while preserving support-relevant information of each grid. The purified features are passed to decoupled heads to infer the hierarchical sparse supports in the JAS domain. Finally, LS is performed over the low-dimensional dictionary constructed from the detected supports to retrieve path gains. Simulation results demonstrate that the proposed framework achieves the highest support detection F1-score and the lowest CE normalized mean square error (NMSE) among all baselines, while ablation studies verify the benefits of integrating the Gram-domain physical prior with data-driven representation learning.

0.19

Simultaneous Direct and Indirect Channel Estimation for RIS-Assisted MIMO Communications

eess.SP ·2026-10-08 ·Daniel V. C. de Oliveira, Daniel C. Alcantara, Fazal. E Asim, Andre L. F. de Almeida, Gabor Fodor
publishedtheory similarity 0.58
Abstract

This paper introduces an enhanced channel estimation method for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) communications. Considering the presence of both the direct link from the base station (BS) to the user equipment (UE) and the indirect link \textit{via} the RIS, we formulate a tensor-based receiver for joint direct and indirect channel estimation called the TenDICE algorithm. The proposed receiver relies on an extended parallel factor analysis (PARAFAC) tensor model for the received pilot signals, from which the involved (direct and indirect link) channels are estimated using a simple alternating least squares scheme. The proposed TenDICE method is compared with the state-of-the-art least squares (LS) method, Khatri-Rao factorization (KRF) method, enhanced trilinear alternating least squares (E-TALS), and the theoretical Cramér-Rao lower bound (CRLB) based on normalized mean square error (NMSE) and spectral efficiency (SE). The proposed TenDICE outperforms the LS and E-TALS methods and performs similarly to the KRF methods while estimating the direct channel.

0.37

Structured Channel Parameter Estimation for RIS-Assisted MIMO Systems via Kronecker and Tensor Factorizations

eess.SP ·2026-09-17 ·Melryllin G. O. Sousa, Jean C. S. Ferreira, Fazal-E Asim
publishedbenchmark similarity 0.57
Abstract

This paper proposes structured channel-parameter estimators for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) systems employing uniform rectangular arrays under line-of-sight propagation. By exploiting the Kronecker and multilinear structures of the cascaded channel, we introduce the Successive Kronecker Factorization (SKF) alongside two Third-Order Tensor Parameter Estimation (TOPE) methods: TOPE-ALS and TOPE-HOSVD. These estimators recover spatial signatures from the pilot-filtered signal matrix, and then decouple the corresponding horizontal and vertical spatial frequencies. This structured formulation achieves benchmark estimation accuracy while reducing computational complexity, offering a efficient solution for RIS-aided systems.

0.25

Model-based learning for DoA estimation and array calibration via continuous sparse recovery

cs.AI cs.LG ·2026-11-06 ·Baptiste Chatelier, José Miguel Mateos-Ramos, Vincent Corlay, Matthieu Crussière, Christian Häger +3 more
similarity 0.57
Abstract

Direction of arrival (DoA) estimation, a classical signal processing problem, has experienced renewed interest with the advent of integrated sensing and communication (ISAC). While decades of research have yielded highly accurate DoA estimators, hardware impairments have frequently been neglected, despite degrading both DoA estimation accuracy and downstream communication performance in ISAC systems. This work introduces a joint array calibration and DoA estimation method based on the simultaneous orthogonal matching pursuit (SOMP) algorithm, following the model-based machine learning paradigm. The proposed method enables the calibration of antenna arrays subject to severe gain-phase and antenna location impairments through projected gradient descent (PGD), with either supervised or unsupervised objectives. Additionally, DoA estimation is enhanced by extending SOMP to continuous dictionaries via PGD refinement steps. Simulation results demonstrate that the proposed method enables efficient hardware impairment compensation, even without labeled samples, while outperforming conventional sparse recovery and subspace-based DoA estimation baselines.

0.24

Scalable High-Precision Near-Field Channel Parameter Estimation via Spatial Chirp Structure

eess.SP ·2026-09-17 ·Lin Chen, Xiaojun Yuan, Ying-Jun Angela Zhang
similarity 0.56
Abstract

This paper presents a scalable framework for high-precision near-field multipath channel parameter estimation in extremely large antenna array (ELAA) systems, enabling joint recovery of path number, path gains, angles, and ranges from a single noisy observation. The key idea is to interpret the near-field multipath channel as a superposition of spatial chirp components with spatially varying frequencies and exploit this structure through a partitioned ELAA architecture. Specifically, we establish a Chirp-coupled Subarray Far-field (CSF) model, where each near-field path is locally represented as a far-field sinusoid with a constant spatial frequency within each subarray, while these local spatial frequencies are coupled across subarrays through a linear relationship induced by the underlying spatial chirp, forming a path-specific chirp trajectory. Based on this model, we propose the CHirp-coupled Angular-Range estiMation (CHARM) algorithm, which performs gridless local frequency estimation followed by cross-subarray trajectory recovery. To mitigate the potential modeling mismatch of the CSF model, we further propose the enhanced CHARM (E-CHARM) algorithm, which refines the CHARM estimate under the near-field channel model through maximum likelihood. The computational complexity of the proposed algorithms scales linearly with the array size. Moreover, simulation results show that the proposed algorithms achieve reliable path-number detection, high-precision angle-range estimation, and accurate channel reconstruction.

0.16

Analysis and Approximation of Spatially Wideband Array Factor of Thinned Antenna Arrays

eess.SP ·2026-09-30 ·Marcin Wachowiak, André Bourdoux, Sofie Pollin
similarity 0.55
Abstract

This work investigates the spatially wideband (SWB) array factor (AF) of linear thinned antenna arrays. The SWB AF is formulated as a matched filter and expressed as a spatially variant convolution of a spatially narrowband (SNB) AF and a SWB kernel. Originally derived for uniform arrays, the SWB AF approximation is revisited and extended to thinned arrays. The approximation is shown to remain accurate across a wide range of parameters. Representing the SWB AF as a convolution offers an intuitive interpretation of how the bandwidth-aperture product modifies the SNB AF. Specifically, the SWB kernel acts as an averaging window for the SNB AF, suppressing the sidelobe levels (SL) of the SNB AF. In thinned arrays, the sidelobes away from the mainlobe can be treated as random, noise-like, making averaging and suppression particularly effective. Next, the analytical formulas for the expected SL and peak-to-sidelobe level (PSL) in SNB thinned arrays are first introduced and subsequently extended to the SWB regime. Finally, simple closed-form expressions for the expected SL and PSL levels of the uniformly thinned arrays with a uniform spectrum are provided. The expected SWB SL and PSL are formulated as functions of the bandwidth-aperture product and are shown to steadily decrease with distance from the mainlobe.

0.07