CS Paper Radar

Target Sensing in Full-Dimensional MIMO-OFDM ISAC Systems Via Coupled Tensor Decomposition

Ruoyu Zhang, Tingjie Yang, Tianyu Zhao, Lei Cheng, Shuai Wang, Wen Wu, Hüseyin Arslan

eess.SP ·submitted 2026-10-17 11:54 UTC · v1
top venue

Abstract

Integrated sensing and communication (ISAC) has been recognized as a key enabler for future wireless communication systems. However, existing ISAC designs based on MIMO-OFDM generally fail to fully exploit the spatial degrees of freedom and the communication data payload, resulting in restricted target sensing performance. To cope with this issue, in this paper we propose a novel target sensing method for full-dimensional (FD) MIMO-OFDM ISAC systems based on coupled tensor decomposition. We first characterize the system model of FD MIMO-OFDM ISAC, where the base station employs a large number of antennas in two dimensions and facilitates both sensing and communication via the data payload of OFDM signals. Then, we formulate the problem of estimating target parameters as a coupled canonical polyadic decomposition (CPD) problem, which jointly leverages the echo signals of communication data payload over multiple subcarriers in the frequency domain. The theoretical analysis indicates that the formulated coupled CPD problem possesses a more relaxed uniqueness condition compared with the ordinary CPD problem, thereby enabling more stable target sensing performance through the pure communication data payload in FD MIMO-OFDM ISAC. In addition, we develop a coupled CPD-based target sensing algorithm, where the target parameters, including azimuth and elevation angles, ranges, and velocities, are extracted from the decomposed factor matrices. Numerical results show that the proposed target sensing method achieves a higher success rate and more accurate parameter estimation than existing tensor decomposition methods.

Comment
16 pages, 10 figures
Journal ref
EEE Transactions on Wireless Communications, 2026
DOI
10.1109/TWC.2026.3743637

Closest papers

Nearest neighbours by meaning across the whole index.

Tensor Decomposition-Based Wireless Sensing for MIMO-OFDM ISAC via Flexible Spatial-Temporal-Spectral Optimization

eess.SP ·2026-08-16 ·Chengzhi Ye, Ruoyu Zhang, Lei Yao, Xinrong Guan, Yu Zhang +2 more
similarity 0.84
Abstract

Integrated sensing and communication (ISAC) is regarded as a key enabling technique in future 6th-generation (6G) mobile communication systems. However, existing multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) ISAC designs generally rely on the fixed-position antennas and fixed allocation of time-frequency resources, thereby limiting the degrees of freedom of wireless sensing along the spatial-temporal-spectral dimensions. In this paper, we propose a novel wireless sensing framework for MIMO-OFDM ISAC systems with flexible spatial-temporal-spectral optimization and propose a tensor decomposition-based approach to estimate target parameters, including azimuth/elevation angles, ranges, and velocities. Specifically, we first establish a monostatic wireless sensing model for MIMO-OFDM ISAC systems, where the positions of antenna elements, the allocation of OFDM symbols and subcarriers can be flexibly configured. Then, we formulate the problem of estimating target parameters as a tensor decomposition problem admitting to the canonical polyadic format, which enables the parallel target parameters estimation process from corresponding factor matrices along the spatial, temporal, and spectral dimensions, respectively. Based on the decomposed factor matrices, we derive the Cramer-Rao Bound (CRB) for the unknown target parameters and reveal that the estimation accuracy of azimuth/elevation angles, velocities and ranges is fundamentally determined by the array geometry, the distribution of OFDM symbols and subcarriers. Building on this insight, we obtain an optimized solution for the positions of antenna elements, and optimal solutions for the subcarrier allocation and OFDM symbol allocation to minimize the CRB, as well as the mean square error of target parameters estimation.

0.41

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

eess.SP ·2026-09-10 ·Lei Yao, Yin Xu, Aimin Tang, Taohe Chen, Tianyao Ma +1 more
similarity 0.68
Abstract

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

0.22

Sparse Array-Inspired Frame Structure Design for 5G NR ISAC

eess.SP ·2026-11-06 ·Haisu Wu, Hong Ren, Cunhua Pan, Yuqing Chen, Ruizhe Wang +3 more
similarity 0.64
Abstract · 16 pages, 7 figures, 2 tables

Integrated sensing and communication (ISAC) has emerged as a promising paradigm for future wireless networks. However, the extensive occupation of time-frequency resources for sensing limits the communication capacity. To address the resource conflict, this paper proposes a novel sparse sensing frame structure aligned with the 5G new radio (5G NR) resource grid at the slot and physical resource block (PRB) levels through a predefined sensing-pattern block. Specifically, inspired by the design of two-dimensional (2D) sparse antenna arrays, we map the sparse spatial geometries onto the time-frequency resource grid. By leveraging the hole-free property of the difference coarray, we eliminate the range-velocity ambiguity and cast the sensing signals into a reconstructed higher-order tensor representation. For efficient parameter estimation, we propose a novel binary-tree-based tensor train decomposition (BT-TTD) algorithm that extracts lower-dimensional tensor train cores (TT-cores) and executes a Vandermonde-prior-guided rectified alternating least squares (RecALS) algorithm. Simulation results validate that the proposed scheme achieves competitive estimation accuracy with reduced complexity. Furthermore, we investigate the topological properties of various sparse patterns, revealing the inherent trade-off among sensing accuracy, resource occupancy, and computational complexity.

0.19

ISAC Beamforming Design Based on a Matrix Nearness Formulation With Improved Efficiency

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
published similarity 0.61
Abstract

We propose an integrated sensing and communication (ISAC) beamforming method that performs joint multiple-input multiple-output (MIMO) radar sensing and multi-user MIMO communication. Our approach builds on a matrix nearness formulation of the MIMO radar problem and utilizes our recently proposed efficient solver, where the computational complexity is dominated by an eigenvalue decomposition (EVD) evaluation at each iteration. We extend this formulation to an ISAC scenario by incorporating minimum signal-to-noise ratio constraints as communication design criteria, only requiring statistical channel state information knowledge at base station. Furthermore, we propose a method to avoid the burdensome EVD evaluations in certain iterations, reducing the computation time by up to six times in a massive MIMO setting.

0.53

Practical Hardware-Efficient ISAC: Enabling Multi-Target Sensing With Few RF Chains

eess.SP ·2026-10-12 ·Zhenkun Zhang, Cunhua Pan, Hong Ren, Jun Tang, Dongming Wang +1 more
theory similarity 0.60
Abstract

Hybrid analog--digital arrays reduce hardware cost in integrated sensing and communications (ISAC), but spatial compression and beam-dependent scan responses complicate multi-target estimation with few radio-frequency (RF) chains. To address these challenges, this paper proposes a burst beam-scanning multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) framework that reuses downlink reference signals for joint range, radial-velocity, elevation, and azimuth estimation. Specifically, a structured global--local dual-tensor estimator separates targets by using scanning observations and refines their parameters from selected-beam RF-chain responses, with delay--Doppler signatures maintaining cross-stage target correspondence. The recovered subarray responses yield closed-form elevation and azimuth estimates through exact sum--difference relations, avoiding small-angle approximations and fine angular grid searches. To further improve Doppler accuracy, spatial-mask-aided weighted least squares exploits the longer inter-burst temporal aperture while resolving phase ambiguity using intra-burst estimates. The joint multi-target Cramér--Rao lower bound (CRLB) and corresponding three-dimensional (3D) positioning bound are also derived to characterize estimation performance. Simulation results show that the proposed scheme achieves near-CRLB estimation accuracy at high transmit powers and centimeter- to millimeter-level 3D positioning with only four RF chains, while maintaining low computational cost.

0.12

Variational Bayesian Tensor Decomposition With Discrete Mixture Prior for Unsourced Random Access

eess.SP cs.IT ·2026-09-22 ·Ala Baccar, Alexis Decurninge, Alberto Rech, Sofiane Kharbech, Eric Pierre Simon +1 more
similarity 0.60
Abstract · Journal paper, 14 pages, 8 figures

Tensor-based modulation (TBM) schemes are a promising approach for unsourced random access (URA), where user separation relies on decomposing the received signal tensor via the canonical polyadic decomposition (CPD), typically computed with alternating least squares (ALS). Standard ALS, however, treats the factor matrices as unstructured and fails to exploit the discrete structure of the tensor sub-constellations. We propose DVB-ALS, a discrete variational Bayesian CPD framework with specific priors, tailored to a tensor structure with the corresponding encoding strategy, combined with iterative computation of an approximate posterior distribution. A discrete Gaussian mixture prior on one Grassmannian factor softly aligns the estimates toward the constellation points. The remaining factors are jointly modeled with a structured Gaussian prior whose posterior mean is constrained to the Khatri-Rao product manifold and posterior variance upper-bounded to prevent norm divergence during inference. The resulting closed-form coordinate ascent algorithm jointly estimates all latent factors and their uncertainties. We integrate DVB-ALS into DVB-TBM to design a complete URA receiver with single-user demapping, polar decoding with cyclic redundancy check (CRC) verification, and successive interference cancellation (SIC). Simulation results show significant gains over standard ALS-based decomposition and robust detection performance in URA settings, outperforming state-of-the-art schemes under high system loads.

0.27

Channel Estimation for Movable Antenna Systems: Challenges, Solutions, and Opportunities

eess.SP ·2026-09-12 ·Linchu Chen, Zhendong Li, Zile Zou, Zhou Su, Lin Chen +3 more
similarity 0.59
Abstract

Movable antenna (MA) has emerged as a promising technology for future wireless networks by exploiting channel variation over local antenna movement regions. However, accurate and efficient channel acquisition in MA systems remains challenging due to the trade-off between estimation accuracy and computational complexity. In this article, the MA channel model and the associated estimation framework are first reviewed, where channel information over the movement region is reconstructed from finite measurements by exploiting shared path parameters. The structured dependence of MA observations across space, time, and frequency naturally motivates the adoption of tensor-based modeling for channel estimation. Subsequently, we discuss the tensor-based signal model and corresponding parameter estimation methods from multidimensional observations. These methods are further compared with conventional channel estimation methods in terms of estimation accuracy, computational complexity, and general applicability. Furthermore, a representative case study is provided to illustrate the performance and characteristics of different algorithms under MA channel estimation settings. Finally, some future research directions for tensor decomposition-based channel estimation in MA systems are outlined.

0.17

Simultaneous Direct and Indirect Channel Estimation for RIS-Assisted MIMO Communications

eess.SP ·2026-10-08 ·Daniel V. C. de Oliveira, Daniel C. Alcantara, Fazal. E Asim, Andre L. F. de Almeida, Gabor Fodor
publishedtheory similarity 0.58
Abstract

This paper introduces an enhanced channel estimation method for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) communications. Considering the presence of both the direct link from the base station (BS) to the user equipment (UE) and the indirect link \textit{via} the RIS, we formulate a tensor-based receiver for joint direct and indirect channel estimation called the TenDICE algorithm. The proposed receiver relies on an extended parallel factor analysis (PARAFAC) tensor model for the received pilot signals, from which the involved (direct and indirect link) channels are estimated using a simple alternating least squares scheme. The proposed TenDICE method is compared with the state-of-the-art least squares (LS) method, Khatri-Rao factorization (KRF) method, enhanced trilinear alternating least squares (E-TALS), and the theoretical Cramér-Rao lower bound (CRLB) based on normalized mean square error (NMSE) and spectral efficiency (SE). The proposed TenDICE outperforms the LS and E-TALS methods and performs similarly to the KRF methods while estimating the direct channel.

0.38