CS Paper Radar

Variational Bayesian Tensor Decomposition With Discrete Mixture Prior for Unsourced Random Access

Ala Baccar, Alexis Decurninge, Alberto Rech, Sofiane Kharbech, Eric Pierre Simon, Joumana Farah

eess.SP cs.IT ·submitted 2026-09-22 13:01 UTC · v1

Abstract

Tensor-based modulation (TBM) schemes are a promising approach for unsourced random access (URA), where user separation relies on decomposing the received signal tensor via the canonical polyadic decomposition (CPD), typically computed with alternating least squares (ALS). Standard ALS, however, treats the factor matrices as unstructured and fails to exploit the discrete structure of the tensor sub-constellations. We propose DVB-ALS, a discrete variational Bayesian CPD framework with specific priors, tailored to a tensor structure with the corresponding encoding strategy, combined with iterative computation of an approximate posterior distribution. A discrete Gaussian mixture prior on one Grassmannian factor softly aligns the estimates toward the constellation points. The remaining factors are jointly modeled with a structured Gaussian prior whose posterior mean is constrained to the Khatri-Rao product manifold and posterior variance upper-bounded to prevent norm divergence during inference. The resulting closed-form coordinate ascent algorithm jointly estimates all latent factors and their uncertainties. We integrate DVB-ALS into DVB-TBM to design a complete URA receiver with single-user demapping, polar decoding with cyclic redundancy check (CRC) verification, and successive interference cancellation (SIC). Simulation results show significant gains over standard ALS-based decomposition and robust detection performance in URA settings, outperforming state-of-the-art schemes under high system loads.

Comment
Journal paper, 14 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Bayesian Tensor Train Kernel Machines with Automatic Model Complexity Inference

cs.LG stat.ML ·2026-11-04 ·Afra Kilic, Kim Batselier
code/data similarity 0.61
Abstract · 31 pages, 4 figures, 1 algorithm. Code available at https://github.com/afrakilic/BTTKM

Tensor Network (TN) kernel machines accelerate supervised learning by using low-rank TNs to reduce computation and memory. However, most TN-based methods are deterministic with manually tuned ranks and feature dimensions, while the existing Bayesian TN kernel machine is restricted to the CANDECOMP/PARAFAC decomposition (CPD), whose single rank is shared by all modes. We extend this framework to the tensor train (TT) and propose Bayesian Tensor Train Kernel Machines (BTT-KM), whose hierarchical ARD-type priors on the TT cores infer the TT ranks and feature dimensions from data. Since each TT core is coupled to the others only through its neighbors, its closed-form posterior update requires propagating the contributions of all other cores along the chain. Mean-field variational inference yields a Bayesian alternating least squares algorithm with the same computational complexity as its deterministic counterpart and a closed-form predictive distribution. A synthetic experiment illustrates that BTT-KM recovers the true TT ranks and feature dimensions from an over-parameterized initialization.

0.62

Completing Radio Map Tensors via Factor Diffusion Posterior Sampling

eess.SP ·2026-10-11 ·Le Xu, Rajesh Shrestha, Xiao Fu
similarity 0.60
Abstract · 19 pages (14 pages of main text and 5 pages of appendix)

Radio map estimation (RME), also known as spectrum cartography, aims to recover radio signal strength across multiple domains (e.g., spatial and spectral domains) from sparse measurements, naturally leading to a tensor completion problem. Recent advances show that deep learning-based generative models can provide data-driven structural constraints for RME, yielding substantial performance improvements over traditional model-based approaches. Diffusion models (DMs) represent the current state of the art in generative modeling and hold strong promise for advancing RME. However, existing diffusion-based RME methods often require extensive training data, necessitate retraining when scenarios or measurement formats change, and lack recoverability guarantees. This paper proposes a latent factor diffusion framework for spatio-spectral radio map tensor completion. By training two independent DMs on single-emitter's spatial loss field and spectral signature and embedding them into the factors of the radio map tensor, the proposed approach enables diffusion posterior sampling-based recovery with reduced training complexity as well as enhanced measurement format/sensing pattern flexibility. Recoverability and sample complexity guarantees under the proposed approach are also established. Numerical experiments validate the effectiveness of the proposed method, showing strong generalization across city environments unseen in training data.

0.21

Target Sensing in Full-Dimensional MIMO-OFDM ISAC Systems Via Coupled Tensor Decomposition

eess.SP ·2026-10-17 ·Ruoyu Zhang, Tingjie Yang, Tianyu Zhao, Lei Cheng, Shuai Wang +2 more
top venue similarity 0.60
Abstract · 16 pages, 10 figures

Integrated sensing and communication (ISAC) has been recognized as a key enabler for future wireless communication systems. However, existing ISAC designs based on MIMO-OFDM generally fail to fully exploit the spatial degrees of freedom and the communication data payload, resulting in restricted target sensing performance. To cope with this issue, in this paper we propose a novel target sensing method for full-dimensional (FD) MIMO-OFDM ISAC systems based on coupled tensor decomposition. We first characterize the system model of FD MIMO-OFDM ISAC, where the base station employs a large number of antennas in two dimensions and facilitates both sensing and communication via the data payload of OFDM signals. Then, we formulate the problem of estimating target parameters as a coupled canonical polyadic decomposition (CPD) problem, which jointly leverages the echo signals of communication data payload over multiple subcarriers in the frequency domain. The theoretical analysis indicates that the formulated coupled CPD problem possesses a more relaxed uniqueness condition compared with the ordinary CPD problem, thereby enabling more stable target sensing performance through the pure communication data payload in FD MIMO-OFDM ISAC. In addition, we develop a coupled CPD-based target sensing algorithm, where the target parameters, including azimuth and elevation angles, ranges, and velocities, are extracted from the decomposed factor matrices. Numerical results show that the proposed target sensing method achieves a higher success rate and more accurate parameter estimation than existing tensor decomposition methods.

0.35

Learned Diffusion Channel Priors for Coded MIMO Turbo Receivers

eess.SP ·2026-11-02 ·Taejun Ha, Hyeji Kim, Jeonghun Park
similarity 0.60
Abstract · 6 pages, 3 figures. Submitted to IEEE ICC 2027

Iterative receivers for coded multiple-input multiple-output (MIMO) links estimate the channel from pilots, decoded data, and a prior. In short packets with few pilots and at low signal-to-noise ratio (SNR), the prior matters. An expectation propagation (EP) turbo receiver needs the channel's mean and covariance given an anisotropic Gaussian message from the pilots and decoder. A diffusion prior's denoiser, however, returns only a mean, and only for a channel in isotropic noise. We replace only the receiver's channel-prior module with a learned diffusion prior. At an isotropic query formed from the message, one network gives both moments: its output is the mean, its Jacobian the covariance. They form a matrix-valued EP site, the Gaussian factor representing the prior. We show why an indefinite Jacobian can make the receiver diverge, and we floor its eigenvalues. In coded block error rate (BLER), the diffusion prior fails less than a Gaussian mixture model (GMM) prior learned from the same channels. It does so on a controlled sparse specular model and a 3GPP model, at every tested receive-array and training-set size. On the former, scalar-site controls, with one variance instead of the covariance, keep this advantage, so the gain comes from the diffusion prior.

0.31

Variational Bayesian Data Detection for Multiuser MIMO Systems Corrupted by Phase Noises

cs.IT ·2026-09-08 ·Toan-Van Nguyen, Duy H. N. Nguyen
similarity 0.59
Abstract

Phase noise (PN), arising from imperfect local oscillators, introduces multiplicative distortions that degrade the performance of communication systems. In uplink multiuser multiple-input multiple-output (MIMO) systems, this impairment is further compounded by the presence of independent oscillators at each transmit and receive antenna, each contributing an uncorrelated noise component. Existing PN compensation algorithms at the receiver either rely on linearization approximations that lose accuracy under severe PN conditions, or incur computational complexity that scales prohibitively with the number of antennas. To address these limitations, we propose a variational Bayes (VB) framework for joint PN estimation and data detection in uplink MIMO systems. We develop VB-based detectors that treat noise statistics as latent variables, and reformulate the inference problem by absorbing the transmitter PN into the transmitted signal, treating the resulting composite variable as the inference target. Under von Mises priors, this reformulation yields exact closed-form conjugate posterior updates, from which we derive an improved detector achieving superior performance at low complexity. Simulation results demonstrate that the proposed VB algorithm achieves lower symbol error rates than the Self-Interference Whitening (SIW) algorithm and conventional phase-noise-unaware detectors across a wide range of channel conditions, modulation orders, and PN severities, while remaining computationally scalable to large MIMO deployments.

0.25

Simultaneous Direct and Indirect Channel Estimation for RIS-Assisted MIMO Communications

eess.SP ·2026-10-08 ·Daniel V. C. de Oliveira, Daniel C. Alcantara, Fazal. E Asim, Andre L. F. de Almeida, Gabor Fodor
publishedtheory similarity 0.59
Abstract

This paper introduces an enhanced channel estimation method for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) communications. Considering the presence of both the direct link from the base station (BS) to the user equipment (UE) and the indirect link \textit{via} the RIS, we formulate a tensor-based receiver for joint direct and indirect channel estimation called the TenDICE algorithm. The proposed receiver relies on an extended parallel factor analysis (PARAFAC) tensor model for the received pilot signals, from which the involved (direct and indirect link) channels are estimated using a simple alternating least squares scheme. The proposed TenDICE method is compared with the state-of-the-art least squares (LS) method, Khatri-Rao factorization (KRF) method, enhanced trilinear alternating least squares (E-TALS), and the theoretical Cramér-Rao lower bound (CRLB) based on normalized mean square error (NMSE) and spectral efficiency (SE). The proposed TenDICE outperforms the LS and E-TALS methods and performs similarly to the KRF methods while estimating the direct channel.

0.38

Low-Latency Coded Tensor--Matrix Multiplication for Distributed Signal Processing Systems

eess.SP cs.IT ·2026-09-24 ·Ahmad Tanha, Ali Khalesi
similarity 0.59
Abstract · To appear in Proceedings, IEEE International Workshop on Signal Processing Systems (SiPS), November 2nd-4th, 2026, Bordeaux, France

Large-scale signal processing systems, including aeronautical and aerospace platforms, increasingly rely on tensor operations, whose distributed execution is constrained by communication, memory, and latency bottlenecks. In this paper, we propose a tensor-aware coded computation framework for distributed mode-1 tensor--matrix multiplication that operates directly on tensor subtensors, avoiding explicit unfolding and preserving multi-dimensional structure. For a fixed partitioning configuration, the proposed tensor-PolyDot scheme achieves the same recovery threshold, communication cost, worker-side computation, and memory requirements as conventional matrix-based PolyDot schemes. However, by leveraging multivariate encoding, it replaces high-degree univariate interpolation at the fusion node with structured low-dimensional decoding. This leads to a substantial reduction in decoding complexity and latency, without affecting any other system metric. Additionally, the tensor-based approach improves memory locality and enables parallel decoding across tensor modes, making it well-suited to modern hardware architectures. Numerical results show decoding speedups proportional to the tensor partitioning factor, reaching up to an order-of-magnitude improvement in practical settings. These advantages make the proposed framework particularly relevant to latency-critical aeronautical and aerospace distributed signal processing systems.

0.24

Tensor Decomposition-Based Wireless Sensing for MIMO-OFDM ISAC via Flexible Spatial-Temporal-Spectral Optimization

eess.SP ·2026-08-16 ·Chengzhi Ye, Ruoyu Zhang, Lei Yao, Xinrong Guan, Yu Zhang +2 more
similarity 0.59
Abstract

Integrated sensing and communication (ISAC) is regarded as a key enabling technique in future 6th-generation (6G) mobile communication systems. However, existing multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) ISAC designs generally rely on the fixed-position antennas and fixed allocation of time-frequency resources, thereby limiting the degrees of freedom of wireless sensing along the spatial-temporal-spectral dimensions. In this paper, we propose a novel wireless sensing framework for MIMO-OFDM ISAC systems with flexible spatial-temporal-spectral optimization and propose a tensor decomposition-based approach to estimate target parameters, including azimuth/elevation angles, ranges, and velocities. Specifically, we first establish a monostatic wireless sensing model for MIMO-OFDM ISAC systems, where the positions of antenna elements, the allocation of OFDM symbols and subcarriers can be flexibly configured. Then, we formulate the problem of estimating target parameters as a tensor decomposition problem admitting to the canonical polyadic format, which enables the parallel target parameters estimation process from corresponding factor matrices along the spatial, temporal, and spectral dimensions, respectively. Based on the decomposed factor matrices, we derive the Cramer-Rao Bound (CRB) for the unknown target parameters and reveal that the estimation accuracy of azimuth/elevation angles, velocities and ranges is fundamentally determined by the array geometry, the distribution of OFDM symbols and subcarriers. Building on this insight, we obtain an optimized solution for the positions of antenna elements, and optimal solutions for the subcarrier allocation and OFDM symbol allocation to minimize the CRB, as well as the mean square error of target parameters estimation.

0.41