CS Paper Radar

Beamforming and Filter Design for Bistatic ISAC under Known and Unknown Transmit Symbols

Mohammad Hatami, Nhan Thanh Nguyen, Markku Juntti

eess.SP ·submitted 2026-08-17 09:00 UTC · v1
publishedbenchmark

Abstract

This paper investigates the joint design of beamforming and radar receive filters in a multiuser bistatic integrated sensing and communications (ISAC) system, aiming to maximize the minimum radar signal-to-interference-plus-noise ratio (SINR) under communications SINR and transmit power constraints. We consider two scenarios: transmitted signals are either known or unknown at the radar receiver. We develop tractable solutions to the resulting non-convex optimization problems in both cases. For the known-signal case, we derive closed-form radar receive filters and iteratively design beamforming using fractional programming (FP) and successive convex approximation (SCA). For the unknown case, we adopt an alternating optimization (AO) approach to jointly design the beamforming and receive filters. Numerical results demonstrate that, while both approaches achieve comparable performance under per-slot optimization, knowledge of the transmitted symbols provides significant gains in multi-slot processing via coherent integration. Moreover, the proposed ISAC designs perform close to the radar-only benchmark under moderate communication requirements.

Comment
5 pages, 3 figures. Accepted for presentation at the IEEE SPAWC 2026 conference

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Beamforming and Phase Shifts Design for RIS-Enabled RSMA-ISAC Systems

cs.IT ·2026-08-19 ·Xuejun Cheng, Qian Zhang, Yuhui Jiao, Yufei Zhao, Zheng Dong +1 more
published similarity 0.67
Abstract

This paper investigates the sensing-centric design of reconfigurable intelligent surface (RIS)-enabled rate-splitting multiple access-integrated sensing and communication (RSMA-ISAC) systems. Specifically, we propose a new beam-gain approximation method to enhance the sensing beam gain while satisfying communication quality-of-service (QoS) constraints.Since the joint optimization of the beamforming vectors and RIS phase shifts is highly coupled and non-convex, existing methods typically rely on generic optimization solvers involving substantial computational complexity. To address this issue, we propose an efficient constraints-separation-based alternating optimization algorithm (CS-AO). Our proposed algorithm effectively decouples the optimization variables and yields closed-form solutions for all subproblems, thereby significantly reducing the computational burden. Simulation results show that the proposed algorithm achieves sensing beam-gain performance comparable to successive convex approximation (SCA) and semidefinite relaxation (SDR) benchmarks, while achieving more than 120-fold and 50-fold runtime reductions. In addition, compared with conventional space-division multiple access (SDMA) schemes, the proposed design exhibits substantial sensing beam gain.

0.56

Joint Association and Beamforming Design for Cooperative ISAC Systems

eess.SP ·2026-11-04 ·Abhishek Rajasekaran, Mehdi Karbalayghareh, Xiaoyan Ma, David J. Love, Christopher G. Brinton
theory similarity 0.67
Abstract · 6 pages, 5 figures

Cooperation among multiple base stations (BSs) improves both communication and sensing in integrated sensing and communication (ISAC) networks. However, it requires deciding which BSs serve each communication user (CU) and each target, and how each BS beamforms. In this work, we consider joint BS-CU and BS-target association, and beamforming for a general cooperative ISAC system, overcoming prior simplifications such as single-user or target setups, fixed BS roles, coherent radar or separate waveforms. We maximize a joint communication rate and position Cramer-Rao lower bound (CRLB) based tradeoff utility while guaranteeing a minimum service per-CU using a data queue model. We develop a successive convex approximation (SCA)-based beamforming with closed-form updates. The discrete association problem is solved as an overarching layer using a low-complexity algorithm. Numerical results validate the effectiveness of the algorithm and unveil benefits of cooperative communication and sensing.

0.26

Waveform Design for Simultaneous MIMO Radar Sensing and Multi-User Communication

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
publishedhighly cited similarity 0.66
Abstract

This paper proposes a novel two-stage joint waveform design framework for multi-antenna Integrated Sensing and Communication (ISAC) systems that simultaneously enable Multiple-Input Multiple-Output (MIMO) radar sensing and Multi-User MIMO communication. First, a transmit waveform covariance matrix is designed by solving a convex matrix nearness problem for beampattern synthesis that simultaneously maximizes transmit power in desired directions and minimizes cross-directional correlations, while accommodating independent antenna power constraints and supporting interference suppression through radiation null steering. Second, a waveform conforming to the designed covariance is synthesized while additionally enforcing inter-user interference suppression via the zero-forcing approach and imposing practical implementation constraints, notably limiting the peak-to-average-power-ratio on the individual antenna elements. Simulation results demonstrate that the approach significantly enhances ISAC waveform design flexibility, performance, and computational efficiency compared to the alternative methods in the literature.

0.58

ISAC Beamforming Design Based on a Matrix Nearness Formulation With Improved Efficiency

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
published similarity 0.65
Abstract

We propose an integrated sensing and communication (ISAC) beamforming method that performs joint multiple-input multiple-output (MIMO) radar sensing and multi-user MIMO communication. Our approach builds on a matrix nearness formulation of the MIMO radar problem and utilizes our recently proposed efficient solver, where the computational complexity is dominated by an eigenvalue decomposition (EVD) evaluation at each iteration. We extend this formulation to an ISAC scenario by incorporating minimum signal-to-noise ratio constraints as communication design criteria, only requiring statistical channel state information knowledge at base station. Furthermore, we propose a method to avoid the burdensome EVD evaluations in certain iterations, reducing the computation time by up to six times in a massive MIMO setting.

0.53

Transmit Beamformer Design for Beampattern Synthesis in Phased-Array Radar Systems

eess.SP ·2026-08-21 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
similarity 0.64
Abstract

This paper presents a phased-array transmit beamformer design for beampattern matching and interference suppression. We propose an optimization framework jointly addressing these two objectives. The resulting non-convex problem is solved via alternating minimization, where each subproblem admits a closed-form solution, one of which recovers the classical maximum-gain and null-steering phased-array beamformers. To design an algorithm ensuring theoretical convergence guarantees, the beamformer design is then reformulated as a non-convex set feasibility problem, closely related to the original formulation. This problem is addressed using a provably convergent projected gradient descent method and further enhanced with acceleration techniques that substantially improve empirical convergence. Extensive simulations validate the excellent performance and computational efficiency of the proposed method.

0.26

Precision Coexistence: Angular-Spectral Region Constrained Waveform Design for MIMO-ISAC

cs.IT ·2026-10-21 ·Syed Ali Haider Shirazi, Taejoon Kim, David J. Love, Sergiy A. Vorobyov
published similarity 0.64
Abstract · Paper accepted for presentation at IEEE Conference on Integrated Sensing and Communications 2026

In this paper, we develop a dual-function waveform design framework for multiple-input multiple-output integrated sensing and communication (MIMO-ISAC) systems operating in congested electromagnetic environments. In such environments, the dual-function waveform must coexist with legacy systems, such as localized positioning sensors, maritime radar networks, and satellite communication links, that occupy specific frequency bands and angular sectors. To enable precision coexistence, we incorporate localized angular-spectral region constraints that suppress beamformed energy only within the angle-frequency regions occupied by each legacy system, while preserving the spatial degrees of freedom (DoFs) available outside those regions. The resulting waveform design problem is formulated as a nonconvex optimization problem and solved using a low-complexity majorization--minimization alternating direction method of multipliers (MM--ADMM) algorithm. Simulation results demonstrate that the proposed framework provides precise legacy-system protection while maintaining robust radar sensing and multi-user communication performance.

0.16

Energy-Efficient Waveform Design for ISAC Systems: An Ambiguity-Domain QoS Perspective

eess.SP ·2026-09-04 ·Ngoc-Son Duong, Trung-Hieu Nguyen, Quang-Truong Can
published similarity 0.63
Abstract · accepted at APSIPA ASC 2026

Integrated sensing and communication (ISAC) requires transmit waveforms that simultaneously preserve communication quality, provide reliable sensing, and remain compatible with practical radio-frequency front ends. This paper considers a discrete-time ISAC waveform design problem that minimizes transmit power from the perspective of a novel metric termed the ambiguity-domain sensing signal-to-interference-plus-noise ratio (AF-SINR). The proposed AF-SINR quantifies the ratio between the desired ambiguity-function mainlobe power and the weighted aggregate sidelobe leakage plus noise within a local delay-Doppler region of interest, thereby providing a localized and noise-aware sensing-QoS measure. To enable ISAC operation, the waveform is further required to satisfy per-user effective communication-SINR constraints, while a peak-to-average power ratio (PAPR) constraint is imposed to facilitate practical implementation. The resulting energy-minimization problem is nonconvex due to the fractional QoS expressions, quartic ambiguity terms, and waveform-dependent PAPR constraint. To address this challenge, we propose a fractional-programming successive-convex-approximation (FP-SCA) algorithm. Simulation results verify that the proposed method satisfies all requirements while preserving localized ambiguity suppression over the local delay-Doppler region.

0.23

A Novel Pulse Radar Framework for ISAC-FD-enabled URLLC Systems

eess.SP ·2026-09-13 ·Atefeh Rezaei, Ata Khalili, Falko Dressler, and Robert Schober
similarity 0.63
Abstract

We propose a novel pulse radar framework for integrated sensing and communication (ISAC) systems supporting full-duplex (FD) ultra-reliable low-latency communication (URLLC). Motivated by the stringent delay and reliability requirements of sixth-generation (6G) URLLC services, our framework integrates pulse-based radar sensing with sporadic packet transmissions for URLLC users while accounting for residual self-interference (SI) inherent in FD systems. We adopt a time-structured approach in which the silent intervals of the radar pulse are opportunistically exploited for communication. A key focus is minimizing the total energy consumption of the base station, which is critical for sustainable radar-assisted wireless networks. To this end, we jointly optimize the sensing pulse width, beamforming vectors, and URLLC scheduling while ensuring communication and sensing quality-of-service (QoS) constraints. We formulate a non-convex mixed-integer optimization problem addressing sensing and communication requirements jointly. Sensing performance, quantified via the Cramer-Rao bound (CRB), is reformulated using the Schur complement. Finite blocklength capacity approximations capture the URLLC constraint, while probabilistic constraints are modeled using cumulative distribution functions. The original non-convex problem is decomposed into two sub-problems via an alternating optimization algorithm. Simulation results reveal important trade-offs between sensing time, energy consumption, and residual SI. Our proposed method improves system performance while explicitly accounting for SI, and demonstrates improved URLLC reliability with reduced energy consumption. The results show that proper design of the sensing duration and FD scheduling yields a flexible ISAC framework capable of robust operation even under strong interference.

0.13