CS Paper Radar

Energy-Efficient Tri-Hybrid Beamforming with Movable Pattern-Reconfigurable Antennas

Hong-Bae Jeon, Suhwan Jang, Chan-Byoung Chae

eess.SP ·submitted 2026-11-02 05:44 UTC · v1

Abstract

Conventional hybrid precoding is confined to the digital/analog domains, leaving the spatial and radiation-pattern degrees-of-freedoms (DoFs) largely untapped. To unlock these, we propose a movable pattern-reconfigurable antenna (MPRA) and an energy-efficient tri-hybrid framework that jointly optimizes the precoders, antenna positions, and radiation-pattern states. We develop a hardware-inspired power model capturing the energy and transmission-time costs of antenna reconfiguration. The resulting mixed discrete-continuous fractional problem is solved via an alternating-optimization framework combining fractional programming, Riemannian optimization, and switching-aware pattern optimization. Simulations demonstrate near-exhaustive-search performance and consistent energy-efficiency (EE) gains, validating the complementary benefits of antenna movement, pattern reconfiguration, and tri-hybrid precoding under hardware-inspired power and latency costs.

Closest papers

Nearest neighbours by meaning across the whole index.

Finite-Aperture Modeling of Pattern-Reconfigurable Antennas for Multiuser Beamforming

eess.SP ·2026-10-07 ·Kangjian Chen, Han Qing Yang, Hang Wong
similarity 0.67
Abstract · 14 pages, 11 figures; submitted to IEEE for possible publication

This paper establishes a finite-aperture model for pattern-reconfigurable antennas (PRAs) and exploits its aperture-constrained Fourier representation to develop an efficient multiuser beamforming framework. First, we develop an ideal model by representing the complex radiation pattern using a Fourier series. By applying the Jacobi-Anger expansion, we relate the antenna aperture to the effective Fourier order and derive aperture-dependent power bounds for individual Fourier coefficients. Second, we employ a practical multiport network model and design three representative reconfigurable pixel antennas to verify the predicted effective Fourier orders and per-order power constraints. We then formulate weighted sum-rate maximization for multiuser downlink transmission under both models. Using bounded Fourier coefficients as auxiliary variables, we develop a coefficient-bound penalty-based weighted minimum mean-square error algorithm that separates continuous beamforming from discrete switch-state optimization. We further propose a one-bit neighborhood search that exploits the Sherman-Morrison identity to accelerate the discrete optimization. Simulation results validate the physical relevance of the ideal model and demonstrate multiuser sum-rate gains and reduced optimization runtime for densely switched antennas. The proposed model provides a physically grounded basis for PRA-enabled communication analysis and design, while the framework accommodates different beamforming objectives and PRA implementations.

0.32

Tri-Hybrid SWIPT with Reconfigurable Parasitic Antennas

eess.SP cs.IT ·2026-10-09 ·Thien Duc Hua, Mohammadali Mohammadi, Hien Quoc Ngo, Michail Matthaiou
similarity 0.64
Abstract

We propose a coupling-aware tri-hybrid precoding architecture for simultaneous wireless information and power transfer (SWIPT) using reconfigurable parasitic antennas. By integrating multiport network theory and information theory, we develop a third precoding layer that explicitly accounts for mutual coupling and reactive energy storage within the antenna domain. To efficiently optimize this architecture, we propose a low-complexity tri-hybrid solution comprising coordinate descent (CD) for parasitic reactive load optimization, a singular value decomposition (SVD)-based analog precoder, and a protective partial zero-forcing (PPZF) digital precoder. Numerical results demonstrate that the transmit array introduces impedance mismatch that reduces the real power accepted by the antenna array. Moreover, the proposed tri-hybrid architecture significantly outperforms hybrid precoding by constructively exploiting the coupling effects, yielding substantial gains in spectral efficiency (SE) and sum non-linear harvested energy (NLHE) at a fraction of the hardware cost.

0.35

Tri-Hybrid Cell-Free Massive MIMO Systems

eess.SP ·2026-10-08 ·Janith Dassanayake, Gayan Aruma Baduge
similarity 0.63
Abstract

This paper proposes a tri-hybrid precoder design, cascading digital, analog, and electromagnetic processing layers, for cell-free massive multiple-input multiple-output (CFmMIMO) systems. We jointly optimize the three-layer precoders and access point (AP) transmit power to maximize global energy efficiency (GEE) under per-AP power and fronthaul constraints. To solve this, we develop an alternating optimization algorithm. The first sub-routine maximizes sum spectral efficiency (SE) for precoder design using weighted minimum mean square error, Riemannian manifold optimization, and gradient ascent over Lorentzian phases. The second optimizes power allocation via Dinkelbach's fractional programming and successive convex approximation. Convergence and computational complexity are also analyzed. Simulation results show the proposed design improves GEE by 87% and 11% over fully digital and classical hybrid precoders, respectively, at 20dBm transmit power. Moreover, joint power optimization yields 22% SE and 16% GEE gains over equal-power baselines, while outperforming colocated architectures in SE. Finally, we identify GEE-optimal regimes for AP and RF chain counts, and demonstrate that increasing dynamic metasurface antenna sizes enhances GEE in low-power regimes with negligible active power overhead.

0.23

Learning-Assisted Beamforming Optimization for Hybrid XL-RIS-Aided Communication

cs.IT ·2026-11-07 ·Awuni Mohammed Abdul-Razak, Kyungchun Lee
similarity 0.61
Abstract · 13 pages, 8 figures

Hybrid active-passive extremely large-scale reconfigurable intelligent surface (XL-RIS) architectures mitigate the double-hop path loss of passive RIS while enabling near-field spatial energy focusing, but impose a computationally intensive mixed discrete-continuous beamforming design problem under strict radio-frequency (RF) power constraints. This paper investigates a hybrid XL-RIS-assisted downlink multi-user multiple-input single-output (MU-MISO) system in the near-field regime. The joint optimization of the base station (BS) precoder, discrete XL-RIS phase shifts, and active-element amplification gains is addressed via a discrete coordinate ascent (DCA)-based alternating optimization (AO) framework, in which discrete variables are updated through local index-domain searches and the BS precoder is derived in closed form via a noise-aware minimum mean-square error (MMSE) criterion. To reduce the per-sample computational cost for XL-RIS apertures, a deep unfolding (DU) framework is proposed as a low-complexity alternative, unrolling a fixed number of Riemannian gradient ascent steps on the sum-rate objective and recovering the discrete phase configuration via quantized phasor projection, with one learnable step size per layer trained in a self-supervised manner. Numerical results under near-field spherical-wave channel models confirm that the DU framework achieves sum-rate performance close to the AO scheme with substantially lower and nearly constant runtime, and that both schemes consistently outperform manifold optimization under discrete hardware constraints.

0.19

Hybrid STAR-RIS Architecture for Joint Localization, Communication, and Power Transfer

eess.SP ·2026-08-12 ·Haoran Ni, Mohammadali Mohammadi, Xidong Mu, Hien Quoc Ngo, Michail Matthaiou
top venue similarity 0.60
Abstract · Accepted for publication in IEEE Transactions on Wireless Communications, Aug. 2026

We propose a hybrid simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) architecture with dynamically switched active and passive elements to support joint localization, communication, and wireless power transfer (WPT). We first pursue a parallel factor analysis with the alternating least squares (PARAFAC-ALS)-based tensor decomposition approach that decouples the base station (BS)-reconfigurable intelligent surface (RIS) and RIS-user channels, thereby enabling low-overhead channel acquisition. Based on this, we formulate a system energy efficiency (EE) maximization problem, subject to the spectral efficiency (SE) requirements of communication users, sensing signal-to-interference-plus-noise ratio constraints, and the nonlinear energy harvesting requirements of energy-harvesting users. The optimization problem is nonconvex since the transmit power allocation, STAR-RIS coefficients, and active/passive mode assignments are tightly coupled in both the objective and constraints. We address this issue by alternating between two subproblems, and solving them via fractional programming, successive convex approximation and a multi-seed greedy strategy employed as an initialization step. Numerical results demonstrate that selectively activating a small, well-chosen subset of STAR-RIS elements achieves 1.5 to 3 times EE improvements compared with fully passive/active architectures, while satisfying communication, sensing, and power-transfer requirements.

0.63

Energy Efficient Multi-User Beamforming and 3D Position Optimization for SIM-Assisted UAVs

eess.SP ·2026-08-13 ·Chandan Kumar Sheemar, Giovanni Iacovelli, Sourabh Solanki, Wali Ullah Khan, George C. Alexandropoulos +1 more
benchmark similarity 0.60
Abstract

This paper studies energy-efficient downlink multi-user transmissions with unmanned aerial vehicle (UAV) communication systems equipped with stacked intelligent metasurfaces (SIM), enabling wave-domain analog beamforming through multiple cascaded metasurface layers, while low-dimensional digital precoding is carried out using a limited number of transmit radio-frequency chains. This architecture enables flexible electromagnetic wave manipulation with reduced hardware complexity, making it particularly suitable for energy-constrained aerial platforms. We formulate a hardware-aware energy-efficiency (EE) maximization problem aiming to jointly optimize the digital precoder, the phase shifts of all SIM layers, and the three-dimensional UAV position under transmit-power, SIM operation, and UAV deployment constraints. The resulting problem is highly non-convex due to the fractional objective, the cascaded SIM structure and the unit-modulus phase constraints of the constituent metasurface layers, as well as the non-linear UAV-dependent channel. To address these challenges, we develop a transform-based alternating optimization framework that combines Dinkelbach's method, dual and quadratic transforms, to enable closed-form digital beamforming, Riemannian manifold optimization for SIM phase shifts, and successive convex approximation (SCA) for UAV positioning. Convergence and complexity analyses are provided to characterize the proposed algorithm. The presented numerical results showcase that the proposed joint design significantly improves EE compared with fully digital and maximum ratio transmission benchmark schemes, while revealing important design trade-offs among transmit power, SIM size, and the number of its constituent stacked layers.

0.40

Beamforming and Filter Design for Bistatic ISAC under Known and Unknown Transmit Symbols

eess.SP ·2026-08-17 ·Mohammad Hatami, Nhan Thanh Nguyen, Markku Juntti
publishedbenchmark similarity 0.59
Abstract · 5 pages, 3 figures. Accepted for presentation at the IEEE SPAWC 2026 conference

This paper investigates the joint design of beamforming and radar receive filters in a multiuser bistatic integrated sensing and communications (ISAC) system, aiming to maximize the minimum radar signal-to-interference-plus-noise ratio (SINR) under communications SINR and transmit power constraints. We consider two scenarios: transmitted signals are either known or unknown at the radar receiver. We develop tractable solutions to the resulting non-convex optimization problems in both cases. For the known-signal case, we derive closed-form radar receive filters and iteratively design beamforming using fractional programming (FP) and successive convex approximation (SCA). For the unknown case, we adopt an alternating optimization (AO) approach to jointly design the beamforming and receive filters. Numerical results demonstrate that, while both approaches achieve comparable performance under per-slot optimization, knowledge of the transmitted symbols provides significant gains in multi-slot processing via coherent integration. Moreover, the proposed ISAC designs perform close to the radar-only benchmark under moderate communication requirements.

0.57

Joint EM-BB Beamforming Design for ISAC Systems With Reconfigurable Antenna Arrays

eess.SP ·2026-10-06 ·Jvxiang Hu, Mengzhen Liu, Rang Liu, Qian Liu, Ming Li
benchmark similarity 0.58
Abstract · 6 pages, 4 figures, conference

This paper investigates the joint electromagnetic (EM)-domain and baseband (BB)-domain beamforming for integrated sensing and communication (ISAC) systems enabled by pattern- and polarization-reconfigurable pixel-antenna arrays. A multiport-network-based antenna model is developed to map each binary switch configuration to its radiation response using the impedance and open-circuit radiation data extracted from Computer Simulation Technology (CST) Studio Suite simulations. Based on this model, polarization-aware virtual channels are constructed for downlink communication and statistical target sensing, leading to a mixed-integer nonconvex problem that maximizes the average sensing signal-to-noise ratio (SNR) subject to user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. To handle the coupled binary and continuous variables, we propose an alternating optimization algorithm, in which the EM-domain switch-state matrices are updated using successive exhaustive Boolean optimization (SEBO), the BB-domain precoder is optimized via a minorization-maximization (MM) and second-order cone programming (SOCP) procedure, and the sensing combiner is obtained from a Rayleigh-quotient update. Simulation results show that the proposed design achieves higher sensing SNR and stronger target-angle robustness than the fixed-patch benchmark.

0.30