CS Paper Radar

Active STAR-RIS-Aided RSMA IoT Systems: Performance Analysis, Model-Based and Data-Driven Resource Allocation Frameworks

Ngo Hoang Tu, Vo Nguyen Quoc Bao, Tran Thien Thanh

eess.SP ·submitted 2026-09-06 07:01 UTC · v2
published

Abstract

STAR-RISs have emerged as a promising technology for achieving full-space signal coverage with low hardware complexity and energy consumption. In parallel, RSMA offers a flexible interference management mechanism that enhances spectral efficiency and user fairness. Integrating STAR-RIS with RSMA provides strong potential for robust and energy-efficient communications; however, the resulting double-fading cascaded channels and the inherent imbalance between near and far users pose reliability and fairness challenges. This study presents comprehensive information-theoretic and optimization frameworks for active STAR-RIS-assisted RSMA Internet-of-Things systems. Closed-form expressions for the OP and EC are derived under both the presence and absence of direct links. Based on these results, asymptotic OP and EC, diversity order, and array gain are analyzed to characterize system behavior. In addition, throughput-based and spectral-based energy efficiency metrics are investigated to quantify the tradeoffs between transmission performance and power consumption. To enhance user fairness, a fairness-oriented RA framework is developed to jointly optimize power allocation and rate-splitting coefficients using successive convex approximation and block coordinate descent techniques. To further improve scalability and real-time applicability, we introduce a data-driven RA framework based on DMNN, CMNN, and MXGB. This framework approximates the optimization-based solutions with substantially reduced computational complexity. Numerical results show that the proposed MXGB model achieves the shortest execution time while maintaining performance comparable to ground-truth-based benchmarks. Extensive Monte Carlo simulations validate the analytical results and demonstrate the effectiveness of the proposed frameworks.

Comment
This work has been accepted for publication in IEEE Internet of Things Journal

Closest papers

Nearest neighbours by meaning across the whole index.

Leveraging Movable-Element STARS for RSMA-SWIPT Under Practical System Imperfections

eess.SP ·2026-09-24 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Zhu Shoujin, Mikael Gidlund +1 more
benchmark similarity 0.64
Abstract · 14 pages, 9 figures

We study a robust multiuser framework for simultaneous wireless information and power transfer (SWIPT), where rate-splitting multiple access (RSMA) is integrated with a movable-element simultaneously transmitting and reflecting surface (ME-STARS). By allowing the STARS elements to change their positions in addition to controlling the reflection and transmission coefficients, the proposed architecture provides additional spatial flexibility for improving the cascaded channels toward users in both regions. Meanwhile, RSMA is employed to manage multiuser interference, while power-splitting receivers enable simultaneous information decoding and energy harvesting. The system design further accounts for channel state information (CSI) uncertainty, residual transceiver hardware impairments (HIs), and the nonlinear characteristics of practical energy-harvesting circuits. Accordingly, a robust sum-rate maximization problem is formulated by jointly designing the BS precoders, common-rate allocation, ME-STARS reflection/transmission coefficients, power-splitting (PS) ratios, and movable-element positions. The resulting formulation is highly non-convex because the movable-element positions affect the cascaded channels non-linearly and are tightly coupled with the remaining design variables. To obtain a tractable solution, the joint design is decomposed into active beamforming, passive beamforming, movable-element positioning, and PS-ratio optimization blocks, which are updated iteratively through suitable convex reformulations. Numerical results show that the proposed framework delivers higher sum rates than the considered benchmark schemes, exhibits robust behavior under CSI uncertainty and residual HIs, and achieves stable convergence across the considered system configurations.

0.16

Weighted Sum-Rate Optimization of Near-Field STAR-RIS-Aided ISAC Systems Under Hardware Impairments

cs.IT ·2026-11-16 ·Huy T. Nguyen, Nhu-Thinh Bui Doan, Minh-Tuan Pham, Thai-Hoc Vu, Tien-Hoa Nguyen +1 more
similarity 0.63
Abstract

This paper investigates weighted sum-rate (WSR) optimization for a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS)-assisted multi-user multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system operating under the energy splitting (ES) protocol. A hybrid propagation model is considered, where the base station (BS)-STAR-RIS channel follows far-field propagation, whereas the STAR-RIS-user channels are modeled using near-field spherical wavefronts. Practical hardware impairments (HWIs), including STAR-RIS phase perturbations and signal-dependent additive distortion at the BS and user equipment (UEs), are incorporated into the system model. Under this framework, the WSR maximization problem is formulated subject to radar beampattern, quality-of-service, transmit-power, and STAR-RIS ES constraints. The resulting problem is highly non-convex due to the coupling among the active beamformers, passive STAR-RIS coefficients, and HWI-dependent signal-to interference-plus-noise ratio expressions. An alternating optimization (AO)-based successive convex approximation framework is developed to iteratively solve the active and passive beamforming subproblems. Numerical results demonstrate stable convergence of the proposed algorithm and consistent WSR improvement over direct-link transmission. Besides, severe HWIs also lead to WSR saturation in the high transmit-power regime, whereas stringent sensing constraints reduce communication throughput. Increasing the STAR-RIS aperture and the number of BS antennas improves the achievable WSR, although the performance gain becomes limited under strong hardware distortion.

0.22

Finite Blocklength Performance Analysis of Uplink RSMA with Practical Imperfections

eess.SP ·2026-11-10 ·Farjam Karim, Nurul Huda Mahmood, Arthur Sousa de Sena, Deepak Kumar, Matti Latva-aho
published similarity 0.61
Abstract

Future generations of wireless networks will support massive communication and hyper-reliable low-latency communications, which are fundamental to large-scale Internet of Things (IoT) deployments with stringent performance requirements. To support such diverse and demanding requirements, robust and flexible multiple access schemes are essential. In this work, we develop a comprehensive analytical framework for evaluating uplink rate-splitting multiple access (RSMA) in the finite blocklength regime under realistic non-ideal conditions. Specifically, we derive closed-form expressions for the block error rate (BLER) and goodput, accounting for imperfect channel state information at the receiver (CSIR), imperfect successive interference cancellation (SIC), and hardware impairments. To reflect practical wireless environments, we model the channel using Nakagami-m fading model. Our analysis shows that at lower transmit power levels, imperfect CSIR is the dominant performance-limiting factor, whereas hardware impairments and imperfect SIC become more significant in degrading system performance as the transmit power increases. To further understand the system behavior, we derive asymptotic BLER expressions. We also analyze the impact of rate allocation, demonstrating its critical role in ensuring fairness and reliability. Monte Carlo simulations validate our analytical expressions. Notably, our results show that uplink RSMA significantly outperforms NOMA even when RSMA operates under harsh imperfect CSIR. This superiority establishes RSMA as a robust and efficient candidate for future wireless networks in practical, constrained environments

0.29

SINR-Aware Adaptive Offloading and Resource Allocation in Shared-Spectrum Integrated Terrestrial and Non-Terrestrial Networks

eess.SP ·2026-10-31 ·Aman Khalid, Muhammad Sohaib Aslam, Ahmed Naeem, Seyit Karatepe, Muhammet Kirik +1 more
theory similarity 0.61
Abstract

Sharing the sub-6~GHz spectrum between terrestrial networks and low Earth orbit satellites introduces cross-tier interference in both directions, as terrestrial transmissions can degrade satellite-link reception, while satellite transmissions can impair the performance of terrestrial links. Conventional reference signal received power (RSRP)-based offloading, designed for separate frequency bands, does not account for this cross-tier interference. We study offloading and resource allocation in an integrated terrestrial and non-terrestrial network through a two-timescale framework in which signal-to-interference-plus-noise ratio (SINR)-aware adaptive traffic offloading (SAATO) updates user associations from filtered SINR and load-aware expected throughput, switching a user only across a hysteresis band, while joint cross-tier fractional programming (Joint-FP) optimizes resource allocation for the resulting associations. Under an equal-share resource allocation model, the resulting decision metric approximates the change in proportional-fair utility with an error that decays with load. We prove that joint allocation under the sum-rate utility is nondeterministic polynomial-time (NP)-hard and that the utility sequence accepted by Joint-FP is non-decreasing and convergent. At full spectral overlap, RSRP-based offloading leaves 44\% of user samples below 0.5~Mbps (outage), whereas SAATO with Joint-FP, given instantaneous channel knowledge, leaves none and increases geometric-mean throughput by 8\% and 2\% under half and full spectral overlap, respectively, relative to power control without offloading. It also limits tier switching to at most 0.05 switches per user per minute.

0.20

On the Optimal Power Allocation and Performance Analysis for the HSIC-PA Aided Hybrid NOMA

eess.SP ·2026-10-19 ·Ning Wang, Ziyue Lv, Yanshi Sun, Member, Minghui Min +1 more
similarity 0.60
Abstract

Hybrid non-orthogonal multiple access (H-NOMA), which leverages the complementary advantages of orthogonal multiple access (OMA) and NOMA, has emerged as a promising technique for next-generation wireless networks. This paper investigates power allocation optimization for the OMA and NOMA time slots allocated to the opportunistic user in H-NOMA systems, aiming to overcome the limitations of conventional equal power allocation strategies. Specifically, we consider an H-NOMA scheme that integrates hybrid successive interference cancellation (HSIC) with power adaptation (PA), referred to as the HSIC-PA aided H-NOMA scheme. To better adapt to practical communication scenarios, distinct power coefficients are assigned to the OMA and NOMA time slots of the opportunistic user to maximize the achievable data rate. Closed-form expressions for the optimal power allocation coefficients are derived, and simulation results validate the accuracy and effectiveness of the theoretical analysis.

0.12

Hybrid PPO-Based Multi-Objective Optimization for UAV-mounted STAR-RIS with Energy Harvesting

eess.SY ·2026-10-20 ·Anas Hussin, Khaled M. Rabie, Mahmoud M. Salim, Ali H. Muqaibel, Louai A. Al-Awami
similarity 0.59
Abstract

This paper investigates a multi-objective optimiza tion framework for UAV-mounted reconfigurable intelligent sur face (STAR-RIS)-assisted Sixth Generation (6G)-enabled Internet of Things (IoT) systems. The considered framework jointly supports communication enhancement and radio-frequency (RF) energy harvesting (EH) through adaptive STAR-RIS transmission and reflection control. A weighted multi-objective optimization problem is formulated to jointly optimize the base station (BS) beamforming vectors, STAR-RIS transmission and reflection coefficients, RF power-splitting factor, and UAV trajectory under quality-of-service (QoS), power, and mobility constraints. Due to the strong coupling among the communications, EH, and UAV mobility variables, the resulting problem is highly non convex and difficult to solve using conventional optimization methods. To address this challenge, a hybrid proximal policy optimization (H-PPO) framework is proposed. The developed hybrid actor-critic architecture combines a categorical policy for discrete UAV movement decisions with Beta-distributed policies for continuous communication-control variables. In addition, a two-stage reward mechanism is introduced to enforce QoS feasibility while balancing system sum rate, energy efficiency, and harvested energy. Simulation results demonstrate that the proposed H-PPO framework achieves faster convergence and more stable training behavior than proximal policy optimization (PPO) and twin delayed deep deterministic policy gradient (TD3) baselines. In particular, H-PPO achieves approximately 66% and 60% faster convergence than PPO and TD3, respectively, while maintaining more stable training behavior. Furthermore, the proposed framework effectively balances communication performance and EH under different QoS requirements, STAR RIS sizes, transmit power levels, and user densities.

0.17

Rate-Splitting Multiple Access for RIS-Enabled Full-Duplex Communications with User Relaying

cs.IT ·2026-10-13 ·Yuwen Cao, Hui Wang, Tomoaki Ohtsuki, Shahid Mumtaz
similarity 0.59
Abstract

Rate splitting multiple access (RSMA) has emerged as a promising non-orthogonal transmission mechanism to improve spectral- and energy efficiency, and user fairness in multi-antenna broadband channels. To further enhance its performance, in this paper we investigate a novel cooperative RSMA (C-RSMA) transmission framework assisted by reconfigurable intelligent surface (RIS) and user relaying. More specifically, we first formulate the common- and private-rate maximization problem satisfying the transmit power constraint, by jointly optimizing the transmit beamformers at the BS and the reflective beamformer at the RIS. The above formulated problem is an intractable and NP-hard problem as the optimization variables are coupled and the strong residual self-interference (SI) is involved. To conquer the challenge mentioned above, we propose a low-complexity alternative optimization approach to jointly optimize the transmit and reflective beamforming. Simulation results show that our approach is capable of enabling superior sum-rate performance than the RIS-assisted space division multiple access (SDMA), half-duplex RSMA, and SDMA without using RIS schemes.

0.10

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

cs.IT ·2026-09-10 ·Anders Enqvist, Özlem Tuğfe Demir, Cicek Cavdar, Emil Björnson
published similarity 0.58
Abstract · 13 pages, 8 figures. A preliminary version was presented at IEEE VTC2024-Spring

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

0.58