CS Paper Radar

Weighted Sum-Rate Optimization of Near-Field STAR-RIS-Aided ISAC Systems Under Hardware Impairments

Huy T. Nguyen, Nhu-Thinh Bui Doan, Minh-Tuan Pham, Thai-Hoc Vu, Tien-Hoa Nguyen, Lajos Hanzo

cs.IT ·submitted 2026-11-16 04:04 UTC · v1

Abstract

This paper investigates weighted sum-rate (WSR) optimization for a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS)-assisted multi-user multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system operating under the energy splitting (ES) protocol. A hybrid propagation model is considered, where the base station (BS)-STAR-RIS channel follows far-field propagation, whereas the STAR-RIS-user channels are modeled using near-field spherical wavefronts. Practical hardware impairments (HWIs), including STAR-RIS phase perturbations and signal-dependent additive distortion at the BS and user equipment (UEs), are incorporated into the system model. Under this framework, the WSR maximization problem is formulated subject to radar beampattern, quality-of-service, transmit-power, and STAR-RIS ES constraints. The resulting problem is highly non-convex due to the coupling among the active beamformers, passive STAR-RIS coefficients, and HWI-dependent signal-to interference-plus-noise ratio expressions. An alternating optimization (AO)-based successive convex approximation framework is developed to iteratively solve the active and passive beamforming subproblems. Numerical results demonstrate stable convergence of the proposed algorithm and consistent WSR improvement over direct-link transmission. Besides, severe HWIs also lead to WSR saturation in the high transmit-power regime, whereas stringent sensing constraints reduce communication throughput. Increasing the STAR-RIS aperture and the number of BS antennas improves the achievable WSR, although the performance gain becomes limited under strong hardware distortion.

Closest papers

Nearest neighbours by meaning across the whole index.

Leveraging Movable-Element STARS for RSMA-SWIPT Under Practical System Imperfections

eess.SP ·2026-09-24 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Zhu Shoujin, Mikael Gidlund +1 more
benchmark similarity 0.66
Abstract · 14 pages, 9 figures

We study a robust multiuser framework for simultaneous wireless information and power transfer (SWIPT), where rate-splitting multiple access (RSMA) is integrated with a movable-element simultaneously transmitting and reflecting surface (ME-STARS). By allowing the STARS elements to change their positions in addition to controlling the reflection and transmission coefficients, the proposed architecture provides additional spatial flexibility for improving the cascaded channels toward users in both regions. Meanwhile, RSMA is employed to manage multiuser interference, while power-splitting receivers enable simultaneous information decoding and energy harvesting. The system design further accounts for channel state information (CSI) uncertainty, residual transceiver hardware impairments (HIs), and the nonlinear characteristics of practical energy-harvesting circuits. Accordingly, a robust sum-rate maximization problem is formulated by jointly designing the BS precoders, common-rate allocation, ME-STARS reflection/transmission coefficients, power-splitting (PS) ratios, and movable-element positions. The resulting formulation is highly non-convex because the movable-element positions affect the cascaded channels non-linearly and are tightly coupled with the remaining design variables. To obtain a tractable solution, the joint design is decomposed into active beamforming, passive beamforming, movable-element positioning, and PS-ratio optimization blocks, which are updated iteratively through suitable convex reformulations. Numerical results show that the proposed framework delivers higher sum rates than the considered benchmark schemes, exhibits robust behavior under CSI uncertainty and residual HIs, and achieves stable convergence across the considered system configurations.

0.16

Exploiting Movable-Element STARS for Rate Splitting Multiple Access

eess.SP ·2026-08-17 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Mohd Hamza Naim Shaikh, Muhammad Ayzed Mirza +2 more
benchmark similarity 0.66
Abstract · 13 pages, 10 figures

This paper investigates a movable-element simultaneously transmitting and reflecting reconfigurable intelligent surface (ME-STARS) assisted rate-splitting multiple access (RSMA) system under imperfect channel state information (CSI). Unlike conventional STARS with fixed element positions, the elements of ME-STARS can be repositioned within a predefined region, providing additional spatial degrees of freedom for improving the cascaded transmitter--STARS--user channels. To exploit this flexibility while accounting for CSI uncertainty, we formulate a robust sum-rate maximization problem that jointly optimizes the transmit beamforming, common-rate allocation, reflection and transmission coefficients, and ME-STARS element positions, subject to transmit-power, user-rate, minimum inter-element spacing, and movement-region constraints. The resulting problem is highly non-convex due to the strong coupling among the design variables and the position-dependent channels. To address this challenge, an iterative optimization framework is developed in which the transmit beamforming, STARS coefficients, and element positions are successively optimized through tractable convex reformulations. In particular, the element positions are updated sequentially using a majorization--minimization (MM) framework, where quadratic surrogate functions are constructed from the first- and second-order derivatives of the position-dependent channels while preserving the minimum inter-element spacing constraint. Simulation results demonstrate that the proposed ME-STARS design consistently outperforms the considered benchmark schemes. Moreover, the performance gains remain significant under increasing CSI uncertainty, highlighting the effectiveness of element repositioning for robust RSMA transmission.

0.48

Robust Resource Allocation for STAR-RIS-Assisted ISAC Networks Using Deep Learning

cs.PF ·2026-10-19 ·Yuwen Cao, Jiajun Wu, Howard H. Yang, Tomoaki Ohtsuki, Tony Q. S. Quek
theory similarity 0.65
Abstract

In this paper, we focus on investigating the resource allocation in an integrated sensing and communication (ISAC) system assisted by a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS). Due to the coupled non-convex nature of the optimization problem, solving the above joint resource optimization problem while guaranteeing superior sensing performance is challenging, especially in dynamic environment. To conquer such challenge, prior iterative optimization algorithms have been presented. However, practical implementations of these prior algorithms face notable computational challenges, e.g., the reliance on accurate global channel information and the assumption of ideal phase shifts. In this context, we propose a model-driven deep learning framework for jointly optimizing the transmit beamforming and waveform in ISAC networks with low-overhead. In addition, we adopt the Cramer-Rao lower bound (CRLB) as the sensing performance metric, and the multi-user interference (MUI) energy as the communication performance metric for performance evaluation. Besides, our framework jointly optimizes the transmit beamforming, waveform and the STAR-RIS reflection/transmission coefficient matrices by minimizing the weighted sum of MUI energy and CRLB. Our study also considers the impact of imperfect channel information, making the research scenario more aligned with real-world applications. Simulation results validate that the proposed framework not only achieves higher sum-rate performance comparable to traditional iterative algorithms but also significantly reduces computational complexity in terms of algorithm execution time, as well as exhibits inherent robustness.

0.11

Hybrid STAR-RIS Architecture for Joint Localization, Communication, and Power Transfer

eess.SP ·2026-08-12 ·Haoran Ni, Mohammadali Mohammadi, Xidong Mu, Hien Quoc Ngo, Michail Matthaiou
top venue similarity 0.64
Abstract · Accepted for publication in IEEE Transactions on Wireless Communications, Aug. 2026

We propose a hybrid simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) architecture with dynamically switched active and passive elements to support joint localization, communication, and wireless power transfer (WPT). We first pursue a parallel factor analysis with the alternating least squares (PARAFAC-ALS)-based tensor decomposition approach that decouples the base station (BS)-reconfigurable intelligent surface (RIS) and RIS-user channels, thereby enabling low-overhead channel acquisition. Based on this, we formulate a system energy efficiency (EE) maximization problem, subject to the spectral efficiency (SE) requirements of communication users, sensing signal-to-interference-plus-noise ratio constraints, and the nonlinear energy harvesting requirements of energy-harvesting users. The optimization problem is nonconvex since the transmit power allocation, STAR-RIS coefficients, and active/passive mode assignments are tightly coupled in both the objective and constraints. We address this issue by alternating between two subproblems, and solving them via fractional programming, successive convex approximation and a multi-seed greedy strategy employed as an initialization step. Numerical results demonstrate that selectively activating a small, well-chosen subset of STAR-RIS elements achieves 1.5 to 3 times EE improvements compared with fully passive/active architectures, while satisfying communication, sensing, and power-transfer requirements.

0.63

Movable-Element STARS-Assisted NOMA Communications

eess.SP ·2026-09-25 ·Jingjing Zhao, Yiheng Zhang, Kaiquan Cai, Xidong Mu, Yuanwei Liu
similarity 0.63
Abstract

This paper proposes a movable-element (ME) enabled simultaneously transmitting and reflecting surface (ME-STARS)-assisted non-orthogonal multiple access (NOMA) communication system, where the positions of STARS elements can be flexibly reconfigured to introduce additional spatial degrees-of-freedom. Our objective is to maximize the sum achievable rate by jointly optimizing the active beamforming at the base station (BS) as well as the passive beamforming and MEs positions at the STARS. To tackle the resultant highly-coupled non-convex optimization problem, an alternating optimization-based algorithm is proposed, in which the original problem is decomposed into three subproblems. For the BS and ME-STARS beamforming subproblems, the successive convex approximation method is employed. For the MEs positions optimization, penalty terms are incorporated into the objective function to handle the constraints, thereby transforming the original problem into an unconstrained formulation. The gradient descent algorithm is subsequently applied to iteratively approach the sub-optimal solution. Numerical results demonstrate that: i) ME-STARS-assisted NOMA communications achieve superior performance compared to the NOMA communications assisted by STARS with fixed-position elements; and ii) the performance gain brought by the MEs is significant even with restricted moving region size.

0.04

Active STAR-RIS-Aided RSMA IoT Systems: Performance Analysis, Model-Based and Data-Driven Resource Allocation Frameworks

eess.SP ·2026-09-06 ·Ngo Hoang Tu, Vo Nguyen Quoc Bao, Tran Thien Thanh
published similarity 0.63
Abstract · This work has been accepted for publication in IEEE Internet of Things Journal

STAR-RISs have emerged as a promising technology for achieving full-space signal coverage with low hardware complexity and energy consumption. In parallel, RSMA offers a flexible interference management mechanism that enhances spectral efficiency and user fairness. Integrating STAR-RIS with RSMA provides strong potential for robust and energy-efficient communications; however, the resulting double-fading cascaded channels and the inherent imbalance between near and far users pose reliability and fairness challenges. This study presents comprehensive information-theoretic and optimization frameworks for active STAR-RIS-assisted RSMA Internet-of-Things systems. Closed-form expressions for the OP and EC are derived under both the presence and absence of direct links. Based on these results, asymptotic OP and EC, diversity order, and array gain are analyzed to characterize system behavior. In addition, throughput-based and spectral-based energy efficiency metrics are investigated to quantify the tradeoffs between transmission performance and power consumption. To enhance user fairness, a fairness-oriented RA framework is developed to jointly optimize power allocation and rate-splitting coefficients using successive convex approximation and block coordinate descent techniques. To further improve scalability and real-time applicability, we introduce a data-driven RA framework based on DMNN, CMNN, and MXGB. This framework approximates the optimization-based solutions with substantially reduced computational complexity. Numerical results show that the proposed MXGB model achieves the shortest execution time while maintaining performance comparable to ground-truth-based benchmarks. Extensive Monte Carlo simulations validate the analytical results and demonstrate the effectiveness of the proposed frameworks.

0.32

Tri-Hybrid Beamforming Design for Large-Scale MIMO ISAC Systems

cs.IT ·2026-09-17 ·Tianyu Fang, Mengyuan Ma, Markku Juntti, Inkyu Lee, Joonhyuk Kang +1 more
similarity 0.61
Abstract · 13 pages, journal extention of our previous conference work

Tri-hybrid multiple-input multiple-output (MIMO) architectures have been proposed as a promising solution for enabling energy-efficient communications systems in large-scale antenna arrays by replacing conventional antenna arrays in hybrid beamforming (HBF) systems with low-cost dynamic metasurface antennas (DMAs). In this work, we investigate beamforming design for integrated sensing and communications (ISAC) systems based on tri-HBF architectures, with the objective of jointly enhancing the communications sum rate and sensing sum mutual information. Specifically, we formulate a weighted multi-objective optimization problem that balances communications throughput and sensing mutual information, subject to a total transmit power consumption constraint and the physical limitations inherent to tri-HBF architectures. By exploiting the problem structure, we develop an efficient iterative algorithm with closed-form updates to solve the non-convex optimization problem with low complexity. Numerical results are provided to evaluate the performance of the proposed tri-HBF architecture in various setups. The results demonstrate that the proposed tri-HBF architecture can achieve significant improvement in energy efficiency (EE) compared to the conventional hybrid MIMO and DMA-only configurations, at the cost of minor degradations in sum rate and sensing mutual information.

0.11

Tri-Hybrid Beamforming for T-RIS-Enabled Base Station

cs.IT ·2026-08-20 ·Hongtao Zhang, Chenlong Ding
similarity 0.61
Abstract

Transmissive reconfigurable intelligent surfaces (T-RISs) integrated into the transmitter provide a viable realization of tri-hybrid multiple-input multiple-output (MIMO), where spatial processing is distributed across the digital, analog radio-frequency (RF), and electromagnetic (EM) domains. However, unlike conventional RIS-assisted links, a transmitter-native T-RIS directly participates in radiation formation, making T-RIS front-end modeling and weighted sum-rate (WSR)-oriented joint precoding challenging under practical hardware constraints. This paper develops a unified modeling and precoding framework for transmitter-native T-RIS tri-hybrid multi-user (MU) downlink transmission. Specifically, starting from a continuous-field description, the received field is characterized by the interaction among the feed array, the programmable T-RIS aperture, and the user-side propagation, leading to a cascaded baseband input-output model for MU precoding. Furthermore, the same representation is instantiated in the Fresnel, Fraunhofer, and mixed-field regimes, so that near-field focusing and far-field angular steering can be handled within one front-end model. Additionally, a WSR maximization problem is formulated over the digital precoder, analog network, and T-RIS coefficients under power and quantization constraints. A two-level solver is then developed by coupling outer weighted minimum mean-square error (WMMSE) updates with WMMSE-induced aperture-field shaping and hardware projection. Simulations validate the modeling accuracy and convergence, and show that the proposed full tri-hybrid design improves WSR over baselines while suppressing mixed-field cross-regime leakage.

0.17