CS Paper Radar

Sensing-Based Communication: A Non-Orthogonal Passive Reflection Framework for ISAC

Xin Xiong, Mathew Salas, Sihua Shao, Chen Chen, Mostafa Hassanalian, Rafael Fierro

cs.IT eess.SPeess.SY ·submitted 2026-11-06 00:02 UTC · v1

Abstract

While integrating uplink without disrupting the primary downlink remains a critical challenge for existing reflective communication systems, this paper proposes a non-orthogonal passive integrated sensing and communication (ISAC) mechanism termed Sensing-based Communication. Originating from and validated within an optical retro-reflective system, this mechanism possesses an underlying wave-agnostic architecture with the potential to be generalized across other physical modalities. It leverages incident downlink signals for parasitic modulation via passive tags. By relying solely on fundamental on-off keying (OOK) reflection, the tag unifies the reflective sensing channel and the uplink communication channel, and simultaneously achieves both sensing and duplex communication. Consequently, our approach introduces uplink capability without sacrificing the downlink data rate or consuming additional spectrum resources. At the receiver, we design a joint decoding architecture combining cross-correlation computation and successive interference cancelation (SIC) to fully exploit the degrees of freedom in broadband signals for multi-user interference suppression. We derive closed-form expressions for the interference and bit error rate (BER) assuming zero-mean Gaussian signals. Using an experimental testbed, we validate the pivotal theoretical finding, the scaling relationship of SINR with signal bandwidth and cross-correlation time--where linear regression yields a strong goodness-of-fit with $R^2 = 0.9688$. Furthermore, evaluations under noise-like orthogonal frequency division multiplexing (OFDM) waveforms exhibit high consistency between theoretical derivations and simulation data ($R^2 = 0.9372$, mean absolute percentage error, $\text{MAPE} = 14\%$), confirming the model's accuracy and waveform generalizability.

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Transmit Power and Reflection Coefficient Optimization for Underlay Cognitive Radio Ambient Backscatter Communication

eess.SP ·2026-10-31 ·Chabalala S. Chabalala, Peter Odero Akuon, Zhen Gao
theory similarity 0.60
Abstract · Ambient backscatter communication (AmBC), cognitive radio networks (CRNs), interference management, outage performance, power reflection coe…

The integration of cognitive radio (CR) technology with backscatter communication offers a promising solution for developing spectrum-efficient and low-power wireless networks. In this paper, we investigate the performance of an underlay cognitive radio ambient backscatter communication (CR-AmBC) system operating under primary network (PN) interference constraints. The objective is to maximize the performance of the CR-AmBC system while protecting the PN from interference. Differing from prior work, our formulation jointly accounts for: (i) interference from the PN on the CR receivers, (ii) interference from the backscatter device (BD) on the PN receiver, and (iii) imperfect successive interference cancellation (i-SIC) at the secondary destination. We propose a joint transmit power and reflection coefficient optimization framework that incorporates the minimum data rate requirements, the PN interference constraint, and i-SIC for decoding the BD signal. The nonconvex problem is decomposed into two subproblems solved via alternating optimization: (a) a closed-form expression for the feasible transmit power given a fixed reflection coefficient, and (b) an efficient one-dimensional search for the reflection coefficient. We prove that the power update is optimal, reducing the joint problem to a one-dimensional search, with monotone convergence and $\mathcal{O}(KN_β)$ complexity for $K$ iterations and $N_β$ search points. We present a comprehensive simulation-based performance evaluation and the results demonstrate that the proposed joint transmission power and reflection coefficient optimization provides an effective strategy to maximize the performance of the CR-AmBC system without violating the PN protection constraints.

0.07

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.59
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42

OFDM-ISAC over Data Payloads: MSE Analysis, Constellation Design, and Experimentation

eess.SP ·2026-08-16 ·Kawon Han, Kaitao Meng, Alexandra Chatzicharistou, Christos Masouros
similarity 0.58
Abstract · 13 pages, 12 figures

Orthogonal frequency division multiplexing (OFDM) is a key waveform for integrated sensing and communication (ISAC) systems due to its high spectral efficiency and inherent compatibility with modern wireless standards. However, its fundamental estimation-theoretic sensing performance under random data modulation remains largely unexplored. This paper presents a unified and explicit performance analysis of OFDM-based ISAC systems for multi-target range estimation, focusing on the distinct impacts of the modulation constellation on the sensing performance. We develop a comprehensive estimation-theoretic framework to characterize the range estimation mean-square error (MSE) for both matched filtering (MF) and reciprocal filtering (RF) sensing receiver architectures. Our theoretical analysis reveals that in multi-target and clutter-rich environments, the sensing performance of the MF receiver is fundamentally limited by the fourth-order moment (kurtosis) of the constellation, which determines the data-dependent sidelobe interference level. In contrast, the RF receiver eliminates such interference at the cost of noise enhancement, with its performance governed by the inverse second-order moment of the constellation. Building on these closed-form MSE derivations, we propose a sensing-receiver specific geometric constellation shaping (GCS) framework. By jointly optimizing the constellation geometry based on the minimum Euclidean distance (MED) and receiver-dependent sensing metrics, we enable a flexible trade-off between communication reliability and sensing precision. Our results demonstrate that the proposed constellation shaping provides significant performance gains and facilitates a tailored sensing and communication trade-off across different receiver architectures in practical over-the-air implementations.

0.46

A Continuous Payload-Bearing Discrete Multitone Modulation Framework for Fiber-Optic Integrated Sensing and Communication

eess.SP ·2026-08-29 ·Huan Huang, Ziang Chen, Zhiyang Xue, Dongdong Zou, Yi Cai
similarity 0.58
Abstract · This manuscript has been submitted for consideration for publication

A key challenge in fiber-optic integrated sensing and communication (ISAC) is to make the payload-bearing waveform itself serve both functions without a separate sensing waveform or sensing-only silent interval. We propose a continuous discrete multitone (DMT) framework with two waveform modes, in which the same payload-bearing waveform supports forward intensity-modulation/direct-detection (IM/DD) communication and backward distributed acoustic sensing (DAS). A unified phase-sensitive optical time-domain reflectometry (φ-OTDR) model represents distributed Rayleigh backscattering as a finite-memory sensing multipath channel. It shows that conventional pulse-and-wait φ-OTDR requires a round-trip-time-scale silent interval to isolate successive returns, while nonzero off-peak samples in practical matched-filter (MF) pulse compression cause spatial intersymbol interference (ISI). Continuous DMT instead retains superposed returns and separates range-cell contributions through known-waveform channel reconstruction. Cyclic-prefix DMT (CP-DMT) uses a full-memory CP and one-tap frequency-domain equalization (FDE); under sufficient-CP and ideal full-bin inversion conditions, it eliminates MF-correlation-induced spatial ISI. Cyclic-prefix-free DMT (NoCP-DMT) applies regularized least squares (LS) to the long-memory linear convolution, avoiding the CP at higher receiver complexity. Experiments over a 10-km fiber link localize a 600-Hz disturbance applied by a piezoelectric transducer (PZT) near 5.071 km and recover gauge-differential phase with correlations of 0.989 and 0.987 for CP-DMT and NoCP-DMT, respectively. At 2- and 1-V PZT drive levels, the ten-record localization standard deviations are 0.16/0.11 m and 0.18/0.38 m, respectively. The corresponding IM/DD error vector magnitude values range from 4.80% to 5.00%, with no bit errors observed.

0.50

Shuf-Scatter: Permutation-Based DLI Suppression for OFDM Ambient Backscatter

eess.SP ·2026-10-13 ·Salim Chabani, Riadh Ouzane, Salah Eddine Zegrar, Huseyin Arslan
published similarity 0.56
Abstract

Direct Link Interference (DLI) remains a major bottleneck in Orthogonal Frequency Division Multiplexing (OFDM)-based Ambient Backscatter Communication (AmBC) systems. This letter proposes Shuf-Scatter, a scheme that applies a deterministic permutation to the reflected OFDM waveform to create a distinct correlation-domain signature. By exploiting the quasi-orthogonality between the reshuffled backscatter signal and the direct-link component, the proposed receiver effectively mitigates DLI and enables reliable detection without requiring dedicated spectral resources, or instantaneous Backscatter-Link (BL) Channel State Information (CSI). Analytical and simulation results demonstrate that Shuf-Scatter achieves superior Bit Error Rate (BER) performance under strong DLI while preserving the integrity of the legacy OFDM transmission.

0.30

Radio Imaging and Resource Allocation in Frugal Multistatic D-MIMO ISAC Systems

eess.SP ·2026-08-27 ·Sauradeep Dey, Musa Furkan Keskin, Dario Tagliaferri, Gonzalo Seco-Granados, Henk Wymeersch
similarity 0.55
Abstract

Emerging integrated sensing and communication (ISAC) systems based on distributed MIMO (D-MIMO) enable radio imaging by exploiting spatial diversity across multiple access points (APs). However, joint sensing and communication introduce mutual interference between communication and sensing signals. In this paper, we propose a downlink D-MIMO ISAC framework that allocates orthogonal subcarriers to sensing and communication to eliminate inter-function interference. We consider a phase-coherent architecture in which single-antenna APs serve communication user equipment (UEs) while constructing a reflectivity image of the environment. We develop a two-timescale resource allocation framework that minimizes reconstructed-image entropy subject to a communication spectral-efficiency (SE) constraint. The proposed design follows a communication-centric policy, where imaging uses the resources left after satisfying the communication requirement. The long-timescale optimization (LTO) determines AP modes and subcarrier assignment, including the partitioning between communication and sensing and the allocation of sensing subcarriers among transmit APs, using synthetic scenarios with random UE and target distributions. The short-timescale optimization (STO) adapts the communication-sensing power-splitting factor to preserve the SE constraint in the current scenario. Numerical results show that the proposed orthogonal subcarrier allocation achieves a superior sensing-communication trade-off compared with conventional superposition, where sensing and communication share the same subcarriers. Finally, we evaluate coherent and non-coherent imaging receivers and identify the synchronization regimes in which each approach provides better imaging and localization performance.

0.12

When Does Inter-BS Interference Hurt Sensing in ISAC? An Exact Fisher Information Analysis under Finite-Alphabet Interference

eess.SP ·2026-11-05 ·Kawon Han, Kaitao Meng, Fan Liu, Christos Masouros
similarity 0.55
Abstract · 6 pages, 4 figures, submitted to IEEE possible publication

In networked integrated sensing and communication (ISAC), a base station (BS) performing sensing using its own downlink signals is subject to interference from the downlink transmissions of neighboring BSs. This paper investigates the impact of the signal constellation and waveform on the sensing performance in the presence of such inter-BS interference. For any linear receiver, we show that the mean-squared cross-ambiguity between two random ISAC signals is invariant to the modulation bases and constellations. We then derive the exact Fisher information under finite-alphabet interference with a flat-fading link, which equals the interference-free Fisher information scaled by $1-γ\,\mmse_{\C}(γ)$, where $γ$ denotes the interference-to-noise ratio (INR) and $\mmse_{\C}$ is the minimum mean-square error (MMSE) in estimating an interfering data symbol from its noise-corrupted observation at the sensing receiver. Consequently, Gaussian interference is the worst case and corresponds to the CRB loss of the matched filtering, whereas finite-alphabet interference induces a non-monotonic CRB loss that peaks at intermediate INR and vanishes at high INR. The loss is waveform-independent for the flat-fading BS-BS link, and an expectation-maximization (EM) interference-cancellation receiver approaches the theoretical bound for delay estimation.

0.33

Full-Frame OFDM-ISAC: Joint Constellation, Pilot, and Receive-Filter Design

eess.SP ·2026-09-19 ·Dongil Yang, Kaitao Meng, Fan Liu, Christos Masouros, Kawon Han
similarity 0.55
Abstract · 13 pages, 9 figures

Orthogonal frequency-division multiplexing (OFDM) integrated sensing and communication (ISAC) reuses the entire time-frequency frame, including pilots and data payloads, for radar sensing. The random data payload, however, reduces the sensing dynamic range and degrades the target detection and parameter estimation performance. Existing studies typically optimize the modulation constellation, the pilot pattern, the power allocation, and the receive filter in isolation, overlooking their coupled effects on the sensing ambiguity structure. To address this gap, we propose a joint design of the constellation, the pilot placement and power split, and the mismatched receive filter for full-frame OFDM-ISAC systems, which minimizes the residual interference inside declared regions of interest (ROIs) under a communication rate constraint. For a given transmit signaling scheme, the receive filter admits a closed-form solution. With this filter in place, we derive closed-form expressions for the receiver-specific interference floor and noise enhancement over the 2-D range-Doppler domain, which show that the floor is governed by a single effective statistic of the full-frame signaling. This law reduces the joint design to two steps. A balanced staggered pilot placement removes the deterministic grating lobes of pilot-power boosting, and the shaped constellation and the power split are then selected jointly on the boundary of the rate constraint under the channel estimation error, which attains the joint optimum over the constructed shaping levels to first order in the declared ROI size. Under a quality-of-service (QoS) constraint of $98\%$ of the rate of a conventional 16-QAM frame, the proposed design significantly lowers the interference floor, improves the target detection probability, and achieves better ranging accuracy compared to the conventional receive filter-aware design.

0.17