CS Paper Radar

Shuf-Scatter: Permutation-Based DLI Suppression for OFDM Ambient Backscatter

Salim Chabani, Riadh Ouzane, Salah Eddine Zegrar, Huseyin Arslan

eess.SP ·submitted 2026-10-13 06:48 UTC · v1
published

Abstract

Direct Link Interference (DLI) remains a major bottleneck in Orthogonal Frequency Division Multiplexing (OFDM)-based Ambient Backscatter Communication (AmBC) systems. This letter proposes Shuf-Scatter, a scheme that applies a deterministic permutation to the reflected OFDM waveform to create a distinct correlation-domain signature. By exploiting the quasi-orthogonality between the reshuffled backscatter signal and the direct-link component, the proposed receiver effectively mitigates DLI and enables reliable detection without requiring dedicated spectral resources, or instantaneous Backscatter-Link (BL) Channel State Information (CSI). Analytical and simulation results demonstrate that Shuf-Scatter achieves superior Bit Error Rate (BER) performance under strong DLI while preserving the integrity of the legacy OFDM transmission.

Closest papers

Nearest neighbours by meaning across the whole index.

OFDM-ISAC over Data Payloads: MSE Analysis, Constellation Design, and Experimentation

eess.SP ·2026-08-16 ·Kawon Han, Kaitao Meng, Alexandra Chatzicharistou, Christos Masouros
similarity 0.59
Abstract · 13 pages, 12 figures

Orthogonal frequency division multiplexing (OFDM) is a key waveform for integrated sensing and communication (ISAC) systems due to its high spectral efficiency and inherent compatibility with modern wireless standards. However, its fundamental estimation-theoretic sensing performance under random data modulation remains largely unexplored. This paper presents a unified and explicit performance analysis of OFDM-based ISAC systems for multi-target range estimation, focusing on the distinct impacts of the modulation constellation on the sensing performance. We develop a comprehensive estimation-theoretic framework to characterize the range estimation mean-square error (MSE) for both matched filtering (MF) and reciprocal filtering (RF) sensing receiver architectures. Our theoretical analysis reveals that in multi-target and clutter-rich environments, the sensing performance of the MF receiver is fundamentally limited by the fourth-order moment (kurtosis) of the constellation, which determines the data-dependent sidelobe interference level. In contrast, the RF receiver eliminates such interference at the cost of noise enhancement, with its performance governed by the inverse second-order moment of the constellation. Building on these closed-form MSE derivations, we propose a sensing-receiver specific geometric constellation shaping (GCS) framework. By jointly optimizing the constellation geometry based on the minimum Euclidean distance (MED) and receiver-dependent sensing metrics, we enable a flexible trade-off between communication reliability and sensing precision. Our results demonstrate that the proposed constellation shaping provides significant performance gains and facilitates a tailored sensing and communication trade-off across different receiver architectures in practical over-the-air implementations.

0.46

FM-OFDM: A Constant-Envelope Sensing Waveform with Phase-Differencing Receiver Processing

eess.SP ·2026-09-22 ·Amir Bouziane, Hüseyin Arslan
similarity 0.58
Abstract

Cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) is widely adopted as a reference waveform for integrated sensing and communication (ISAC). However, its high peak-to-average power ratio (PAPR) requires power amplifier back-off, thereby reducing the available sensing link budget. Frequency-modulated OFDM (FM-OFDM) provides a constant-envelope signal with 0 dB PAPR and has demonstrated reliable communication performance in high-mobility scenarios, but its sensing characteristics remain largely unexplored. This paper characterizes FM-OFDM as a sensing waveform based on its bandwidth, ambiguity function, sidelobe behavior, and Doppler estimation capability. The analysis shows that its data dependent sidelobe floor is incoherent and decreases through across frame integration, whereas the corresponding CP-OFDM floor remains unchanged. Consequently, under equal occupied bandwidth and transmit power, frame-level integration reverses the single-symbol performance ordering and provides FM-OFDM with approximately 20 dB of additional dynamic range for weak-target detection. Moreover, the zero-delay cut of the FMOFDM ambiguity function is shown to be deterministic and independent of the transmitted data realization, in contrast to linearly modulated waveforms, while a closed-form expression is derived for the sidelobe floor away from the zero-delay cut. Since the nonlinear mapping between the data symbols and time-domain samples prevents the direct application of the conventional CP-OFDM range-Doppler processing chain, a weighted phase-increment Doppler estimator is developed. The proposed estimator enables closed-form prediction of the sensing floor and its crossover point with a minimum computational complexity.

0.32

Delay-Doppler Domain Aided OFDM (DD-a-OFDM): Pulsone Pilot and Cross-Domain Iterative Receiver Design

eess.SP ·2026-10-21 ·Rongrong Xin, Zhiqiang Wei, Zai Yang
similarity 0.57
Abstract

In high-mobility channels, the widely adopted orthogonal frequency division multiplexing (OFDM) modulation waveform suffers from significant performance degradation due to channel variation and severe inter-carrier interference. Although delay-Doppler (DD) domain multicarrier (DDMC) modulation enjoys a higher channel estimation (CE) accuracy via exploiting the inherent DD-domain channel stability, sparsity, and separability, its high detection complexity limits its practical deployment, making OFDM still a promising waveform candidate for the sixth-generation (6G) cellular networks. To simultaneously harness the complementary strengths of DDMC and OFDM and mitigate their respective limitations, this paper proposes a DD-domain aided OFDM (DD-a-OFDM) framework, including a pulsone pilot (PP) design and a cross-domain iterative receiver design, to enhance the CE and detection performance of OFDM in high-mobility channels. Specifically, a pulsone pilot sequence is periodically inserted before the cyclic prefix (CP) for each OFDM symbol in the time-domain, which is equivalent to a single DD-domain pilot impulse and enables accurate DD-domain CE. Then, we propose a cross-domain iterative receiver in which the time-frequency (TF) domain detection results are transformed into the DD-domain for interference cancellation and CE; in turn, the DD-domain estimated channel is transformed into the TF-domain for channel reconstruction and symbol detection. The proposed cross-domain iterative receiver achieves a higher CE accuracy and detection performance with a much lower pilot overhead, compared to the conventional OFDM system. Simulation results validate the fast convergence and superior performance of the proposed DD-a-OFDM scheme and demonstrate that it maintains a robust CE and detection performance even in high-mobility channels.

0.16

Full-Frame OFDM-ISAC: Joint Constellation, Pilot, and Receive-Filter Design

eess.SP ·2026-09-19 ·Dongil Yang, Kaitao Meng, Fan Liu, Christos Masouros, Kawon Han
similarity 0.57
Abstract · 13 pages, 9 figures

Orthogonal frequency-division multiplexing (OFDM) integrated sensing and communication (ISAC) reuses the entire time-frequency frame, including pilots and data payloads, for radar sensing. The random data payload, however, reduces the sensing dynamic range and degrades the target detection and parameter estimation performance. Existing studies typically optimize the modulation constellation, the pilot pattern, the power allocation, and the receive filter in isolation, overlooking their coupled effects on the sensing ambiguity structure. To address this gap, we propose a joint design of the constellation, the pilot placement and power split, and the mismatched receive filter for full-frame OFDM-ISAC systems, which minimizes the residual interference inside declared regions of interest (ROIs) under a communication rate constraint. For a given transmit signaling scheme, the receive filter admits a closed-form solution. With this filter in place, we derive closed-form expressions for the receiver-specific interference floor and noise enhancement over the 2-D range-Doppler domain, which show that the floor is governed by a single effective statistic of the full-frame signaling. This law reduces the joint design to two steps. A balanced staggered pilot placement removes the deterministic grating lobes of pilot-power boosting, and the shaped constellation and the power split are then selected jointly on the boundary of the rate constraint under the channel estimation error, which attains the joint optimum over the constructed shaping levels to first order in the declared ROI size. Under a quality-of-service (QoS) constraint of $98\%$ of the rate of a conventional 16-QAM frame, the proposed design significantly lowers the interference floor, improves the target detection probability, and achieves better ranging accuracy compared to the conventional receive filter-aware design.

0.17

Joint Transmit Power and Reflection Coefficient Optimization for Underlay Cognitive Radio Ambient Backscatter Communication

eess.SP ·2026-10-31 ·Chabalala S. Chabalala, Peter Odero Akuon, Zhen Gao
theory similarity 0.56
Abstract · Ambient backscatter communication (AmBC), cognitive radio networks (CRNs), interference management, outage performance, power reflection coe…

The integration of cognitive radio (CR) technology with backscatter communication offers a promising solution for developing spectrum-efficient and low-power wireless networks. In this paper, we investigate the performance of an underlay cognitive radio ambient backscatter communication (CR-AmBC) system operating under primary network (PN) interference constraints. The objective is to maximize the performance of the CR-AmBC system while protecting the PN from interference. Differing from prior work, our formulation jointly accounts for: (i) interference from the PN on the CR receivers, (ii) interference from the backscatter device (BD) on the PN receiver, and (iii) imperfect successive interference cancellation (i-SIC) at the secondary destination. We propose a joint transmit power and reflection coefficient optimization framework that incorporates the minimum data rate requirements, the PN interference constraint, and i-SIC for decoding the BD signal. The nonconvex problem is decomposed into two subproblems solved via alternating optimization: (a) a closed-form expression for the feasible transmit power given a fixed reflection coefficient, and (b) an efficient one-dimensional search for the reflection coefficient. We prove that the power update is optimal, reducing the joint problem to a one-dimensional search, with monotone convergence and $\mathcal{O}(KN_β)$ complexity for $K$ iterations and $N_β$ search points. We present a comprehensive simulation-based performance evaluation and the results demonstrate that the proposed joint transmission power and reflection coefficient optimization provides an effective strategy to maximize the performance of the CR-AmBC system without violating the PN protection constraints.

0.07

Bistatic ISAC under Data Payload Uncertainty

eess.SP ·2026-10-04 ·Musa Furkan Keskin, Silvia Mura, Marouan Mizmizi, Dario Tagliaferri, Fan Liu +1 more
similarity 0.56
Abstract

We investigate the problem of data payload uncertainty (DPU) in bistatic integrated sensing and communication (ISAC) systems, which refers to imperfect knowledge of transmit data symbols at the sensing receiver. DPU may result from limited fronthaul capacity in base station (BS)-to-BS bistatic sensing or data demodulation errors in BS-to-user equipment (UE) bistatic sensing, and can impair target detection through elevated sidelobe levels in the delay-Doppler domain. To characterize this effect, we derive closed-form expressions for the peak-to-sidelobe level ratio (PSLR) of two common OFDM receivers, namely reciprocal filtering (RF) and matched filtering (MF), under DPU. The analysis shows that the DPU-induced sidelobe degradation of RF depends on the inverse second-, fourth-, and sixth-order constellation moments, whereas that of MF depends only on the direct fourth-order moment, making RF considerably more vulnerable to DPU. To mitigate the resulting sidelobes, we further propose a novel, DPU-aware minimum mean-squared-error (MMSE) receiver. Simulation results validate the PSLR analysis and demonstrate superior detection performance of MMSE over RF and MF while revealing the extent to which it can recover DPU-induced performance loss relative to a genie-aided receiver with perfect knowledge of data payload.

0.34

Sensing-Based Communication: A Non-Orthogonal Passive Reflection Framework for ISAC

cs.IT eess.SPeess.SY ·2026-11-06 ·Xin Xiong, Mathew Salas, Sihua Shao, Chen Chen, Mostafa Hassanalian +1 more
similarity 0.56
Abstract

While integrating uplink without disrupting the primary downlink remains a critical challenge for existing reflective communication systems, this paper proposes a non-orthogonal passive integrated sensing and communication (ISAC) mechanism termed Sensing-based Communication. Originating from and validated within an optical retro-reflective system, this mechanism possesses an underlying wave-agnostic architecture with the potential to be generalized across other physical modalities. It leverages incident downlink signals for parasitic modulation via passive tags. By relying solely on fundamental on-off keying (OOK) reflection, the tag unifies the reflective sensing channel and the uplink communication channel, and simultaneously achieves both sensing and duplex communication. Consequently, our approach introduces uplink capability without sacrificing the downlink data rate or consuming additional spectrum resources. At the receiver, we design a joint decoding architecture combining cross-correlation computation and successive interference cancelation (SIC) to fully exploit the degrees of freedom in broadband signals for multi-user interference suppression. We derive closed-form expressions for the interference and bit error rate (BER) assuming zero-mean Gaussian signals. Using an experimental testbed, we validate the pivotal theoretical finding, the scaling relationship of SINR with signal bandwidth and cross-correlation time--where linear regression yields a strong goodness-of-fit with $R^2 = 0.9688$. Furthermore, evaluations under noise-like orthogonal frequency division multiplexing (OFDM) waveforms exhibit high consistency between theoretical derivations and simulation data ($R^2 = 0.9372$, mean absolute percentage error, $\text{MAPE} = 14\%$), confirming the model's accuracy and waveform generalizability.

0.23

Noise-Domain OTFS: Statistical Delay-Doppler Signaling for Future Wireless Networks

eess.SP ·2026-09-11 ·Mahmoud Aldababsa
similarity 0.56
Abstract · 6 pages 4 figures

Orthogonal time frequency space (OTFS) usually conveys information through deterministic constellation symbols placed on a delay--Doppler (DD) grid. This article develops a different viewpoint, termed \emph{noise-domain OTFS} (ND-OTFS), in which each message selects the covariance of a random DD-domain vector. The resulting statistical codeword can encode information through per-bin variance, equal-energy correlation structure, or separable DD covariance. We explain the transceiver principle, receiver implications, reliability--rate tradeoffs, and practical challenges. Representative results show that a matched-payload coherent OTFS reference retains a clear raw-reliability advantage, whereas ND-OTFS enables information recovery from covariance geometry even when competing states have identical average energy. Additional statistical observations reduce finite-sample overlap at the cost of latency and rate. ND-OTFS therefore complements, rather than replaces, deterministic OTFS by introducing a matrix-valued statistical signaling dimension across DD resources.

0.22