CS Paper Radar

Dynamic Metasurface Antennas: From Programmable Microwave Hardware to Next-Generation Wireless Systems

Abdul Jabbar, William Whittow

eess.SP ·submitted 2026-09-24 14:25 UTC · v1

Abstract

As wireless systems evolve toward 6G and beyond, antenna apertures are increasingly expected to become more programmable, multifunctional, and responsive to diverse communication, sensing, and imaging requirements. Dynamic metasurface antennas (DMAs) offer a promising hardware pathway toward this vision by integrating electronically addressable metamaterial elements within microwave and millimeter-wave (mmWave) radiating apertures. Unlike conventional phased arrays relying on dedicated phase-shifting networks, DMAs manipulate guided waves in microwave structures through electronically controlled resonant elements. In this way, DMAs offer phase-shifter-less beam-steering, multibeam radiation, and programmable wavefront control. This article explores state-of-the-art DMA technology from a microwave-engineering perspective, spanning guided-wave excitation, reconfigurable resonant meta-elements, microwave tuning technologies, RF-digital integration, and FPGA-controlled beamforming. Closely related electronically steered metasurface antenna architectures are also discussed within a unified microwave-hardware framework. Recent advances illustrating how guided-wave DMA hardware and high-speed electronics facilitate programmable communication, sensing, imaging, and space-time functionalities are reviewed. Key microwave design challenges toward wideband, scalable, and highly integrated DMA apertures are highlighted. Finally, emerging opportunities in satellite communications, near-field connectivity, fixed wireless access, wave-domain computing, and integrated wireless functionalities are explored as future directions for DMA technology. This article provides a unified microwave engineering perspective on the design, practical implementation, and emerging capabilities of DMAs as programmable front-ends for next-generation wireless systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Electromagnetic Information Theory for Programmable Metasurfaces

eess.SP physics.optics ·2026-11-02 ·Philipp del Hougne, Marco Di Renzo, Owen D. Miller, David A. B. Miller
position similarity 0.63
Abstract · 17 pages with 3 figures

Programmable metasurfaces enable fine-grained control of electromagnetic waves and are creating new opportunities for information extraction, information transfer and information processing. Yet, despite exciting experimental demonstrations, their fundamental capabilities remain poorly understood. In this Perspective, we argue that programmable metasurfaces, and programmable wave systems more generally, call for an electromagnetic information theory that addresses limits at two levels, in a unified manner across applications like communications, sensing and computing. First, for a given physical platform, such a theory should bound achievable information manipulations, such as sensing precision, information-transfer rates, and computational performance. Second, at a more fundamental level, it should determine what non-programmable and programmable physical resources bound these system-specific limits, and what minimum resources are required to attain a prescribed level of performance. We discuss emerging theoretical approaches to these questions, and their connection to experimentally realizable systems. We examine how device thickness, programmable degrees of freedom, nonlocality, coupling and multiple scattering constrain these limits. Establishing the envisioned framework could clarify the ultimate capabilities of programmable metasurfaces and guide the design of future wave-based information systems.

0.27

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.62
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

A Frequency-Space Terahertz Transceiver Chip for Multi-Agent Communications and Spatial Awareness

eess.SY physics.app-ph ·2026-08-12 ·Xiaoyue Xia, Zhicheng Lin, Hao Guo, Siran Wang, Jingyuan Zhang +5 more
similarity 0.61
Abstract

Future indoor embodied-intelligence systems require scalable hardware platforms that support both high-capacity multi-agent connectivity and mutual spatial awareness. The terahertz (THz) spectrum offers abundant bandwidth and inherent spatial selectivity for integrated sensing and communication (ISAC); however, conventional phased arrays and programmable metasurfaces rely on dense beamforming networks, element-level control, or external THz illumination, making scalable multibeam operation challenging. Here, we report a fully integrated 208-258GHz 65-nm CMOS THz transceiver chip that monolithically integrates broadband front ends with heterogeneous leaky-wave metasurface (HLM) apertures within a 1.5mm by 4.9mm area. The HLM generates strongly dispersive leaky modes, enabling 75 degree frequency-controlled beam scanning with only four meta-atoms. Co-design of frequency-domain and spatial-domain mixing achieves spectrally clean frequency-to-space mapping for spatial-frequency division multiple access (SFDMA) communication. The THz chip demonstrates multi-agent simultaneous transmission and reception, two-dimensional localization, and sensing-enhanced communication, providing a scalable hardware platform for future THz embodied-intelligence networks.

0.34

Wave-Domain Semantic Equalization Using a Practical Dynamic Metasurface Antenna with Strong Mutual Coupling

eess.SP physics.app-ph ·2026-09-27 ·Yassine Sghaier, Emilio Calvanese Strinati, Philipp del Hougne
similarity 0.58
Abstract · 5 pages with 3 figures

Semantic mismatch between independently trained AI-native agents in heterogeneous networks can impair semantic communications. Hybrid analog-digital semantic equalization can align the incompatible latent representations without retraining the semantic transceivers. We study a practical realization of this approach based on a fabricated dynamic metasurface antenna (DMA), an emerging low-cost, low-power, ultracompact technology for hybrid analog-digital beamforming. We model the DMA-assisted channel using multiport-network theory (MNT), accounting for mutual coupling (MC), structural scattering, and binary lossy tuning states. We use the experimentally estimated MNT parameters of our fabricated 19-GHz DMA prototype with strong MC. We jointly optimize digital pre- and post-equalizers and the DMA at a reference receiver geometry for latent-space alignment, then freeze the digital stages and adapt only the DMA after receiver motion. In our CIFAR-10 image-classification task at the receiver, the jointly optimized system achieves 94.5% accuracy, while DMA-only adaptation restores a median accuracy of 90.3% after receiver motion. Our semantic-aware wave-domain adaptation substantially outperforms semantic-unaware benchmarks. We further observe that varying the DMA configuration across channel uses provides little additional benefit for either semantic-aware or semantic-unaware optimization.

0.58

Dynamic Metasurface Antenna Enabled Real-Time 60 GHz Wireless Video Streaming: A System-Level Demonstration with USRPs and mmWave Front-Ends

eess.SP ·2026-08-23 ·Abdul Jabbar
unusual similarity 0.57
Abstract · To appear in the 19th IEEE United Conference on Millimetre Waves & Terahertz Technologies (UCMMT 2026)

This paper presents a real-time 60 GHz wireless video transmission system enabled by a millimeter-wave (mmWave) Dynamic Metasurface Antenna (DMA) and offers a 60 GHz transceiver solution. The end-to-end communication system is established using off-the-shelf mmWave up/down-conversion modules (EK1HMC6350, HMC6300, and HMC6301) with a connectorized DMA-based transmit front-end and universal software radio peripheral (USRP) for digital baseband processing. The proposed framework eliminates the need for costly high-frequency signal generators and spectrum analyzers, thus simplifying implementation and validation while reducing operational costs. A real-time HD video stream at 720p resolution (1280 x 720) is transmitted and successfully retrieved over a wireless link using QPSK modulation, achieving a data rate of about 3 Mbps with high reliability. The demonstrated platform can support various 60 GHz standard physical-layer protocols, such as IEEE 802.11ad/ay and 802.15.3c. This work highlights the potential of programmable metasurface antennas as a compact, energy-efficient alternative to legacy phased arrays for next-generation 6G and beyond mmWave/sub-THz wireless communication systems, small-cell outdoor backhaul links, and RF sniffing and channel sounding.

0.33

LUNA: Luneburg-Lens-Aided Reconfigurable Array for 6G-and-Advanced Wireless Networks

eess.SP cs.IT ·2026-09-22 ·Ziwei Wan, Zhen Gao, Shuping Dang, Michail Matthaiou, Zhaocheng Wang +1 more
similarity 0.57
Abstract · 7 pages, 5 figures, 1 table, submitted to IEEE journal for possible publication

This article introduces the LUneburg-lens-aided recoNfigurable Array (LUNA), an antenna architecture that unifies multiple-input multiple-output (MIMO) and network-controlled repeater (NCR) functionalities in the Luneburg lens-enabled hardware platform. A Luneburg lens, fabricated from graded-index dielectric materials, passively converts the radiation of a low-gain feed into a highly directional beam without active phase shifting, while a dense passive feed bank and a reconfigurable feed-selection network electronically switch the beam directions with minimal hardware complexity and power consumption. We commence by reviewing the basic principles and application history of Luneburg lenses in radar and wireless communications, which motivates their role in 6G-and-advanced networks. Then, we highlight how a Luneburg lens and a reconfigurable feed array construct both LUNA-MIMO and LUNA-NCR, where the lens and feed bank can be reused across functions and frequency bands. Case studies demonstrate that LUNA achieves the satisfactory spectral and energy efficiency with a few radio-frequency chains, and it also improves positioning performance for sensing tasks. Finally, some open problems and research directions are provided to inspire follow-up research on LUNA.

0.28

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.57
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.57
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30