CS Paper Radar

Dynamic Metasurface Antenna Enabled Real-Time 60 GHz Wireless Video Streaming: A System-Level Demonstration with USRPs and mmWave Front-Ends

Abdul Jabbar

eess.SP ·submitted 2026-08-23 18:07 UTC · v1
unusual

Abstract

This paper presents a real-time 60 GHz wireless video transmission system enabled by a millimeter-wave (mmWave) Dynamic Metasurface Antenna (DMA) and offers a 60 GHz transceiver solution. The end-to-end communication system is established using off-the-shelf mmWave up/down-conversion modules (EK1HMC6350, HMC6300, and HMC6301) with a connectorized DMA-based transmit front-end and universal software radio peripheral (USRP) for digital baseband processing. The proposed framework eliminates the need for costly high-frequency signal generators and spectrum analyzers, thus simplifying implementation and validation while reducing operational costs. A real-time HD video stream at 720p resolution (1280 x 720) is transmitted and successfully retrieved over a wireless link using QPSK modulation, achieving a data rate of about 3 Mbps with high reliability. The demonstrated platform can support various 60 GHz standard physical-layer protocols, such as IEEE 802.11ad/ay and 802.15.3c. This work highlights the potential of programmable metasurface antennas as a compact, energy-efficient alternative to legacy phased arrays for next-generation 6G and beyond mmWave/sub-THz wireless communication systems, small-cell outdoor backhaul links, and RF sniffing and channel sounding.

Comment
To appear in the 19th IEEE United Conference on Millimetre Waves & Terahertz Technologies (UCMMT 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Dynamic Metasurface Antennas: From Programmable Microwave Hardware to Next-Generation Wireless Systems

eess.SP ·2026-09-24 ·Abdul Jabbar, William Whittow
similarity 0.57
Abstract

As wireless systems evolve toward 6G and beyond, antenna apertures are increasingly expected to become more programmable, multifunctional, and responsive to diverse communication, sensing, and imaging requirements. Dynamic metasurface antennas (DMAs) offer a promising hardware pathway toward this vision by integrating electronically addressable metamaterial elements within microwave and millimeter-wave (mmWave) radiating apertures. Unlike conventional phased arrays relying on dedicated phase-shifting networks, DMAs manipulate guided waves in microwave structures through electronically controlled resonant elements. In this way, DMAs offer phase-shifter-less beam-steering, multibeam radiation, and programmable wavefront control. This article explores state-of-the-art DMA technology from a microwave-engineering perspective, spanning guided-wave excitation, reconfigurable resonant meta-elements, microwave tuning technologies, RF-digital integration, and FPGA-controlled beamforming. Closely related electronically steered metasurface antenna architectures are also discussed within a unified microwave-hardware framework. Recent advances illustrating how guided-wave DMA hardware and high-speed electronics facilitate programmable communication, sensing, imaging, and space-time functionalities are reviewed. Key microwave design challenges toward wideband, scalable, and highly integrated DMA apertures are highlighted. Finally, emerging opportunities in satellite communications, near-field connectivity, fixed wireless access, wave-domain computing, and integrated wireless functionalities are explored as future directions for DMA technology. This article provides a unified microwave engineering perspective on the design, practical implementation, and emerging capabilities of DMAs as programmable front-ends for next-generation wireless systems.

0.26

Wave-Domain Semantic Equalization Using a Practical Dynamic Metasurface Antenna with Strong Mutual Coupling

eess.SP physics.app-ph ·2026-09-27 ·Yassine Sghaier, Emilio Calvanese Strinati, Philipp del Hougne
similarity 0.48
Abstract · 5 pages with 3 figures

Semantic mismatch between independently trained AI-native agents in heterogeneous networks can impair semantic communications. Hybrid analog-digital semantic equalization can align the incompatible latent representations without retraining the semantic transceivers. We study a practical realization of this approach based on a fabricated dynamic metasurface antenna (DMA), an emerging low-cost, low-power, ultracompact technology for hybrid analog-digital beamforming. We model the DMA-assisted channel using multiport-network theory (MNT), accounting for mutual coupling (MC), structural scattering, and binary lossy tuning states. We use the experimentally estimated MNT parameters of our fabricated 19-GHz DMA prototype with strong MC. We jointly optimize digital pre- and post-equalizers and the DMA at a reference receiver geometry for latent-space alignment, then freeze the digital stages and adapt only the DMA after receiver motion. In our CIFAR-10 image-classification task at the receiver, the jointly optimized system achieves 94.5% accuracy, while DMA-only adaptation restores a median accuracy of 90.3% after receiver motion. Our semantic-aware wave-domain adaptation substantially outperforms semantic-unaware benchmarks. We further observe that varying the DMA configuration across channel uses provides little additional benefit for either semantic-aware or semantic-unaware optimization.

0.58

Energy-Efficient RF Chain Activation for Uplink mmWave Cell-Free Massive MIMO Systems: A Minimum-Cost Maximum-Flow Approach

eess.SP ·2026-10-12 ·Bo Yu, Abdol Hamid Aghvami, Mohammad Shikh-Bahaei
published similarity 0.48
Abstract · Accepted for presentation at 2026 IEEE Globecom Workshops (GC Wkshps)

With the incessant demand for green and sustainable communications, energy efficiency (EE) has become a cornerstone of sixth-generation (6G) network design, especially for cell-free millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems, which can achieve significant throughput gains by leveraging large-scale antenna arrays. Adaptive radio frequency (RF) chain activation (ARFA) is a key technique for reducing power consumption without severely degrading the achievable rate, thereby enhancing the total EE of 6G MIMO systems. In this paper, we propose a minimum-cost maximum-flow (MCMF)-based ARFA scheme to reduce unnecessary power consumption and maximize the total EE of uplink mmWave cell-free massive MIMO systems. Simulation results indicate that the proposed approach can significantly improve the total EE while maintaining a relatively high achievable rate and acceptable computational complexity.

0.30

Virtualized 5G Tesbed using OpenAirInterface: Tutorial and Benchmarking Tests

cs.NI ·2026-09-11 ·M. Dória, V. Sousa, A. Campos, N. Oliveira, P. Eduardo +7 more
publishedbenchmarkhighly cited similarity 0.47
Abstract

The development of 5G and its evolutionary path to 6G brings virtualization as close as possible to the antennas. Native 3GPP systems are now software running at servers boosted by accelerator cards to cope with computationally intense signal processing. Meanwhile, the Radio Frequency (RF) front-end is still proprietary hardware, sheltering specific PHY-layer procedures like passband amplification/modulation. This approach takes advantage of the software's flexibility while keeping the complex microsecond signal processing performance from modern telecommunication systems. This paper provides tutorial material on the Core Network and Radio Access Network of OpenAirInterface (OAI) 5G stack on top of Universal Software Radio Peripheral (USRP) platforms. A set of blueprints showcases OAI's ability to provide a virtualized 5G network with different transmission capabilities and the possibility to use it with commercial mobile phones. Configuration discussions and throughput benchmark analyses follow installation and deployment instructions. Our results show that 5G prototyping using OAI and USRP frontends can lead to good reproducibility and consistent throughput.

0.49

Channel Measurement and Characteristics Analysis for Indoor Flexible Pinching Antenna Systems in the mmWave Band

eess.SY ·2026-10-30 ·Haoyang Li, Weidong Liu, Songjiang Yang, Zhensheng Chen, Jing Zhu +2 more
similarity 0.46
Abstract

Pinching antenna (PA) systems offer flexible antenna configurations for future wireless communications, yet how PA geometry, orientation, and position affect channel characteristics in practical environments remains insufficiently studied. To address this gap, this paper first presents an indoor PA system channel measurement campaign at 59.5~GHz. A dedicated time-domain channel sounder is developed with frequency conversion and a circular-waveguide-to-dielectric-waveguide transition to feed the radio frequency (RF) signal into a flexible dielectric waveguide. Using this platform, office measurements quantify channel attenuation and channel characteristics by examining four PA geometries, arc PA orientation, circle PA pinching position, and transmitter--receiver height difference. The channel measurement data are analyzed in terms of path loss, shadow fading, root-mean-square (RMS) delay spread, Rician K-factor, normalized capacity, and spatial similarity. Indoor path loss models for PA systems are fitted for each PA geometry. The results reveal geometry-dependent attenuation and shadow-fading variability, with the arc PA showing greater variability than the circle PA. Arc PA rotation shifts the delay spread and conditional K-factor distributions. Moving the circle PA produces nonmonotonic changes in delay spread and normalized capacity, while spatial similarity remains relatively high at many receiver locations as the pinching position changes. These observations provide an empirical basis for PA systems channel model and system design.

0.28

Toward Massive MIMO HAPS Networks: Antenna Architectures and Design

eess.SP ·2026-11-18 ·Shasha Liu, Abla Kammoun, Mohamed Slim Alouini
survey similarity 0.46
Abstract · 8 pages, 3 Figures

High-altitude platform stations (HAPS) are expected to become an important component of sixth-generation (6G) and beyond wireless networks by providing wide-area wireless connectivity through massive multiple-input multiple-output (mMIMO) technology. As the communication performance of HAPS systems is fundamentally determined by the antenna array architecture, efficient antenna design has become a critical research topic. Motivated by these considerations, this article provides a comprehensive overview of antenna array design for mMIMO-enabled HAPS systems and proposes two novel antenna architectures to improve antenna-user alignment and communication performance. Specifically, the representative applications of mMIMO-enabled HAPS are first introduced, followed by the key design requirements for HAPS antenna arrays. Representative antenna architectures are then systematically reviewed and compared under a unified simulation framework based on the 3GPP NTN channel model. Finally, several promising research directions are discussed to provide insights into the design of next-generation intelligent HAPS antenna systems.

0.31

Packet-Level Complex CIR Tracking for Communication-Native mmWave Sensing: An 802.11ad Testbed

eess.SP ·2026-09-14 ·Raquel Marina Noguera Oishi, Haoqiu Xiong, Hany Assasa, Sofie Pollin
similarity 0.45
Abstract

Commercial millimetre-wave (mmWave) Wi-Fi platforms based on IEEE 802.11ad/ay have demonstrated sensing capabilities, but they provide limited visibility into the packet-level measurements and synchronisation mechanisms that determine temporal coherence. We present a programmable 60~GHz IEEE 802.11ad testbed that exposes the complete complex 128-tap channel impulse response (CIR) for every detected packet. This access exposes packet-to-packet delay shifts and common phase drift that commercial-transceiver studies generally do not characterise. We develop a delay-profile alignment method and define a static-reference relative CIR phase that cancels common drift while preserving target-induced variation. We use 30~s respiration sensing to evaluate long-term phase stability for sub-wavelength motion tracking. Across 39 recordings, median absolute waveform correlation increases from 0.41 (timestamp regularised) to 0.52 (delay aligned) and 0.61 (relative-phase calibrated); breathing-rate mean absolute error decreases from 5.1 to 4.1 and 3.6~breaths/min. The results demonstrate controlled characterisation and stabilisation of communication-native WiGig CIR measurements on a fully programmable physical layer.

0.26

Phase-Matched Design of Pinching-Antenna Elements on a 60-GHz Dielectric Rod Waveguide

eess.SP physics.optics ·2026-11-05 ·Stylianos D. Asimonis, Dimitrios Tyrovolas, Spyridon Daskalakis, Nikos C. Sagias, Donal P. Lynch +1 more
similarity 0.45
Abstract · 5 pages, 4 figures, 1 table. Submitted to EuCAP 2027

The radiation of pinching antennas, dielectric elements placed on a dielectric waveguide, depends on the element shape. We explain it with a phase-matching, or prism-coupler, picture: the guided rod mode couples into the denser antenna plate at an angle set by the plate-mode effective index, about 31 degrees at 60 GHz, and radiates through the face it reaches first. This yields a simple sizing rule linking element height to contact length. Rectangular, isosceles and right-triangular elements of equal contact length and height are compared from 53 to 67 GHz in full-wave openEMS simulations including the waveguide-to-rod transitions. The rectangle peaks sharply at the rule, reaching 15.9 dBi. The right triangle keeps its gain within 0.7 dB and its side lobes at least 10 dB down over a two-to-one height range. At the rule, both outperform the isosceles element by 1.2 to 2.1 dB, and all remain matched.

0.31