CS Paper Radar

Channel Measurement and Characteristics Analysis for Indoor Flexible Pinching Antenna Systems in the mmWave Band

Haoyang Li, Weidong Liu, Songjiang Yang, Zhensheng Chen, Jing Zhu, Gaojie Chen, Wei Huang

eess.SY ·submitted 2026-10-30 10:59 UTC · v1

Abstract

Pinching antenna (PA) systems offer flexible antenna configurations for future wireless communications, yet how PA geometry, orientation, and position affect channel characteristics in practical environments remains insufficiently studied. To address this gap, this paper first presents an indoor PA system channel measurement campaign at 59.5~GHz. A dedicated time-domain channel sounder is developed with frequency conversion and a circular-waveguide-to-dielectric-waveguide transition to feed the radio frequency (RF) signal into a flexible dielectric waveguide. Using this platform, office measurements quantify channel attenuation and channel characteristics by examining four PA geometries, arc PA orientation, circle PA pinching position, and transmitter--receiver height difference. The channel measurement data are analyzed in terms of path loss, shadow fading, root-mean-square (RMS) delay spread, Rician K-factor, normalized capacity, and spatial similarity. Indoor path loss models for PA systems are fitted for each PA geometry. The results reveal geometry-dependent attenuation and shadow-fading variability, with the arc PA showing greater variability than the circle PA. Arc PA rotation shifts the delay spread and conditional K-factor distributions. Moving the circle PA produces nonmonotonic changes in delay spread and normalized capacity, while spatial similarity remains relatively high at many receiver locations as the pinching position changes. These observations provide an empirical basis for PA systems channel model and system design.

Closest papers

Nearest neighbours by meaning across the whole index.

Frequency-Selective Pinching-Antenna Systems

eess.SP ·2026-08-21 ·Chongjun Ouyang, Hao Jiang, Zhiguo Ding, Robert Schober
theory similarity 0.65
Abstract · 34 pages

An uplink pinching-antenna system (PASS) is considered, where a segmented dielectric waveguide is employed to serve multiple users and one pinching antenna (PA) is activated on each segment. Extensive waveguide deployment reduces user-to-PA path loss but also creates differential propagation delays among the PA-assisted paths spanning the large waveguide aperture. These delays are retained, and a Toeplitz block model is derived to characterize the resulting frequency-selective (FS) channel. For infinite-blocklength transmission, the achievable single-user rate and the multiuser sum-rates under joint and parallel decoding are characterized. For carrier-phase-aligned single-user PA placement, the frequency-flat (FF) model is shown to overestimate the exact FS rate. The difference between the rates computed under the FF channel model and the exact FS channel model is referred to as the FF rate overestimation, and its dependence on the waveguide-aperture-induced delay spread is characterized. For small delay spreads, the FF rate overestimation is shown to increase approximately quadratically with the delay spread, whereas a derived lower bound reveals that the overestimation grows at least double logarithmically with the waveguide aperture, or equivalently with the delay spread, in the large-aperture regime. For finite-blocklength transmission, achievable rates are derived under a practical cyclic-prefix single-carrier frequency-domain equalization framework. An element-wise algorithm is developed to optimize FS-aware PA placement in both transmission regimes. The analytical findings demonstrate that differential delays across the extensively deployed waveguide can cause significant frequency selectivity and that the proposed FS-aware PA placement method substantially improves the achievable rate over placement based on the FF approximation, especially for large bandwidths and apertures.

0.20

Curved Waveguide-Enabled Pinching-Antenna System (C-PAS): Communication Performance Analysis

eess.SP ·2026-08-24 ·Yayun Qu, Kunrui Cao, Tao Wang, Lu Lv, Jiwei Tian +3 more
similarity 0.60
Abstract

Existing studies on the pinching-antenna system (PAS) assume that waveguides are deployed straight, which fails to serve communication regions with curved boundaries. To address this limitation, this paper proposes a curved waveguide-enabled pinching-antenna system (C-PAS), where the waveguide is placed along the building ceiling in an arc to maximize the line-of-sight (LoS) coverage. On this basis, the optimal pinching-antenna (PA) placement strategy and the nearest PA placement strategy are presented. The optimal strategy distinguishes between scenarios, i.e., with or without inner-wall blockage, and derives a closed-form solution for the optimal PA position to maximize the signal-to-noise ratio (SNR) received at the user. Meanwhile, the nearest strategy aligns the PA with the angular position of a user in polar coordinates, thereby accommodating the curved geometry of the region. Furthermore, the outage probability (OP) and the average rate (AR) are analyzed for each strategy, and the corresponding analytical expressions are derived, respectively. The results show that the optimal PA placement strategy achieves better OP and AR performance than the nearest strategy, particularly under large waveguide loss coefficient or waveguide height. Moreover, for a service region of fixed area, there exists an optimal sector angle or inner-wall radius that either minimizes the outage probability or maximizes the average rate. Furthermore, the choice of a waveguide bending radius is influenced by the transmit power of the base station, where a smaller bending radius is preferable at high power and the middle arc performs best at low power.

0.38

Directional and Quasi-Omnidirectional Indoor Channel Measurements at Upper 6 GHz

cs.ET cs.IT ·2026-10-10 ·Chengsong Fu, Hongbo Zhao, Jianer Zhou, Xiongbin Yu, Weichao Li +4 more
similarity 0.60
Abstract

This paper presents wideband indoor channel measurements and measurement-based statistical modeling of channel parameters in the upper 6 GHz (U6G) band using directional and quasi-omnidirectional antenna pairs. Measurements span 6.425-7.125 GHz at 32 matched positions per configuration in an open hall and an L-shaped corridor. System calibration and frequency-dependent peak-gain normalization retain antenna radiation-pattern weighting. Close-in and floating-intercept models are fitted to line-of-sight (LOS) and non-LOS (NLOS) path loss, respectively. Shadow-fading residuals, RMS delay spread (DS), and equivalent K factors derived from power delay profiles are characterized. LOS exponents range from 1.98 to 2.14. Despite similar attenuation slopes, directional links exhibit smaller LOS residuals and DS and higher equivalent K factors. Hall DS medians are 1.78 and 36.52 ns for directional and quasi-omnidirectional links. Corridor NLOS slopes are -1.12 and 2.54, respectively, while DS ordering varies by position. These results characterize antenna-dependent parameters for U6G indoor channels.

0.12

Analysis and Antenna Position Selection for Pinching-Antenna Systems in Fading Channels

eess.SP ·2026-10-26 ·Amy S. Inwood, Peter J. Smith, Hyundong Shin, Michail Matthaiou
top venue similarity 0.59
Abstract

Pinching-antenna systems (PASSs) are an emerging flexible antenna technology that enables the creation of line-of-sight (LoS) links by repositioning a radiating element along a dielectric waveguide (WG). Most existing studies of PASSs assume a purely LoS environment, despite the fact that many practical wireless environments exhibit scattering and spatially correlated shadow fading. In this paper, we present the first statistical analysis of PASS performance under Ricean fading with spatially correlated large-scale fading. Focusing on a fundamental single-user uplink PASS, we characterize the distribution and mean of the maximum achievable signal-to-noise ratio (SNR). For the classical exponentially correlated shadow fading scenario, we express the channel power process in terms of Brownian motion and derive highly accurate approximations for the maximum SNR distribution and mean. For a general class of smoothly correlated shadow fading processes, we derive an accurate expression for the SNR distribution by modeling the process in terms of the fade sojourn duration. To address the challenges of antenna position selection in fading environments, we propose radio environment map (REM)-based positioning strategies, including opportunistic random-look and grid-based constructions. Analytical results are validated by simulation, and the impacts of key system parameters, such as the Ricean $K$-factor, spatial correlation, WG length, and carrier frequency are investigated. The results provide insights into PASS operation beyond idealized LoS conditions and establish a general analytical framework for performance evaluation and antenna positioning in scattered environments.

0.52

Multiple Access in Pinching-Antenna Systems: A Survey, Impairment Analysis, and Evaluation

cs.IT eess.SP ·2026-10-02 ·Wei Jiang, Hans Dieter Schotten
survey similarity 0.58
Abstract · 20 pages, 9 figures, 6 tables. Submitted to IEEE Open Journal of the Communications Society

Pinching-antenna systems attach dielectric pinches to a waveguide, creating line-of-sight radiation points within a few meters of any user. The pinches on one waveguide, however, radiate the same signal, unlike a conventional array, where each element transmits a dedicated signal. Separating the signals of multiple users therefore becomes challenging and requires a new perspective on multiple access. Most existing studies rest on an idealized model, and no survey examines the access schemes under realistic impairments. This article surveys multiple access in pinching-antenna systems and organizes fifty-six works into a unified taxonomy by spatial degrees of freedom. The users of one waveguide can be separated only in time, frequency, power, or guided mode, while multiple waveguides add the space domain. The article then identifies the impairments critical to this separation, which perturb the effective channel, leak interference across orthogonal resources, or couple the pinches on the uplink, and summarizes them in an impairment-versus-method map. A unified evaluation of time-, frequency-, power-, and space-domain access under identical channel and impairment models reveals that the degradation is method specific. The analytical and numerical results give insight into multiple access in these systems and provide a basis for its impairment-aware design, a necessary step toward their adoption in practical networks.

0.18

Design and Analysis of Pinching-Antenna Systems With Radially Deployed Waveguides (X-PASS)

cs.IT eess.SP ·2026-11-02 ·Wei Jiang, Hans D. Schotten
similarity 0.57
Abstract · 6 pages, 5 figures. Submitted to IEEE ICC 2027

Pinching-antenna systems (PASS) reconfigure the wireless channel by positioning dielectric antennas along a waveguide. A single waveguide, however, confines its antennas to one line, so that good coverage of an area has relied on several waveguides or waveguide segments with separate feeds. This paper proposes X-PASS, in which a hub feeds radially deployed waveguide arms, one pinching antenna on each, and drives them by arm selection, aggregation or multiplexing. It models the hub with its insertion losses, derives a unified signal-to-noise ratio expression for these three operating modes, and derives in closed form a radius inside which aggregation outperforms selection. Numerical results validate the analysis and compare the coverage of X-PASS with that of the other layouts at equal transmit power.

0.23

From Electromagnetic Physics to Intelligent Optimization: A Deterministic Modeling for Indoor Pinching-Antenna Systems

eess.SP ·2026-09-26 ·Qiushi Zhao, Zihan Feng, Ximing Xie, Hao Qin
similarity 0.56
Abstract

Pinching-antenna systems (PASS) enable flexible wireless transmission by activating pinching antennas (PAs) along dielectric waveguides. However, existing PASS analyses commonly rely on tractable analytical or statistical channel abstractions that do not jointly capture in-waveguide field evolution, sequential PA power extraction, and site-specific indoor multipath propagation. This paper develops a physics-driven deterministic framework for end-to-end modeling of indoor PASS. Specifically, the parabolic wave equation (PWE) resolves the position-dependent electromagnetic field inside the dielectric waveguide, and coupled-mode theory (CMT) maps the local guided field to the radiation power and phase of each PA. Ray tracing (RT) subsequently models the site-specific indoor electromagnetic propagation from each PA to the users, including LoS, reflected, and diffracted components. To enable efficient repeated evaluations, we combine a reusable PWE-CMT field representation with a physics-assisted neural-network-based RT surrogate that preserves propagation geometry, visibility, and phase information. The proposed framework achieves a complex-channel NMSE of -19.14 dB while reducing the end-to-end single-link evaluation time from approximately 2.5 s to 77 ms. Its application to single- and multi-user deployment demonstrates that the physical model can be efficiently reused for PA-position and power-allocation optimization while preserving the underlying position-dependent propagation physics.

0.23

Electromagnetic Modeling of Deformation-Based Pinching Antennas

eess.SP ·2026-10-22 ·Dimitrios Tyrovolas, Nikos C. Sagias, Ke Guan, George K. Karagiannidis, Stylianos D. Asimonis
similarity 0.55
Abstract

Pinching-antenna systems (PAS) rely on local perturbations of a guiding structure to radiate part of the guided electromagnetic energy, making the physical response of the resulting pinching antenna (PA) fundamental to both guided-wave propagation and free-space radiation. To capture this coupled behavior, we develop an electromagnetic model of a finite deformation-based PA that directly relates the applied waveguide perturbation to its complex reflection and transmission responses and three-dimensional radiation characteristics. Full-wave MEEP simulations validate the model and demonstrate how the pinching ratio and pinched-section length jointly affect the transmitted power and phase, radiation power-fraction, and radiation pattern, thereby establishing PA geometry as a degree of freedom for controlling the radiation response. Importantly, this geometric dependence extends to communication performance, as the received signal-to-noise ratio (SNR) results reveal that neither minimizing the PA--user distance nor maximizing the radiation power-fraction necessarily yields the highest SNR, since the applied perturbation also determines the realized gain toward the user.

0.23