CS Paper Radar

Energy-Efficient RF Chain Activation for Uplink mmWave Cell-Free Massive MIMO Systems: A Minimum-Cost Maximum-Flow Approach

Bo Yu, Abdol Hamid Aghvami, Mohammad Shikh-Bahaei

eess.SP ·submitted 2026-10-12 22:42 UTC · v1
published

Abstract

With the incessant demand for green and sustainable communications, energy efficiency (EE) has become a cornerstone of sixth-generation (6G) network design, especially for cell-free millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems, which can achieve significant throughput gains by leveraging large-scale antenna arrays. Adaptive radio frequency (RF) chain activation (ARFA) is a key technique for reducing power consumption without severely degrading the achievable rate, thereby enhancing the total EE of 6G MIMO systems. In this paper, we propose a minimum-cost maximum-flow (MCMF)-based ARFA scheme to reduce unnecessary power consumption and maximize the total EE of uplink mmWave cell-free massive MIMO systems. Simulation results indicate that the proposed approach can significantly improve the total EE while maintaining a relatively high achievable rate and acceptable computational complexity.

Comment
Accepted for presentation at 2026 IEEE Globecom Workshops (GC Wkshps)

Closest papers

Nearest neighbours by meaning across the whole index.

Channel-Chart-Driven Antenna Activation for Energy-Efficient Cell-Free Massive MIMO

eess.SP ·2026-11-12 ·Yara Kafa, Luc Le Magoarou, Joumana Farah, Matthieu Crussi{è}re
published similarity 0.59
Abstract

Cell-free massive MIMO (CF-mMIMO) can provide uniformly high system performance across the coverage area through distributed cooperation. However, keeping all antennas active leads to high circuit and fronthaul power consumption. This paper studies energy-efficient uplink reception through antenna activation, where only a subset of distributed antennas is selected to serve the users. To enable network-wide activation with low signaling overhead, each access point (AP) maps its locally estimated channel state information (CSI) into a lowdimensional channel-chart (CC) embedding and forwards this representation to the central processing unit (CPU) instead of the full CSI. Based on the received embeddings, we formulate a binary antenna-activation problem for network EE maximization and propose three low-overhead strategies: (i) direct embeddingdomain activation using a proxy EE metric without CSI reconstruction, (ii) nearest chart-point CSI approximation, which estimates CSI from a reference chart database for greedy EE optimization, and (iii) decoder-based CSI reconstruction using a pre-trained autoencoder. The proposed approaches further enable a systematic comparison of antenna activation techniques in terms of achieved performance, computational complexity, and signaling overhead. Numerical results show substantial EE gains over the all-active baseline, with only a minor degradation in sum spectral efficiency and a significant reduction in signaling overhead. Moreover, the proposed greedy framework achieves EE performance close to that of the simulated annealing baseline, confirming its effectiveness for low-complexity antenna activation.

0.29

Tri-Hybrid Cell-Free Massive MIMO Systems

eess.SP ·2026-10-08 ·Janith Dassanayake, Gayan Aruma Baduge
similarity 0.59
Abstract

This paper proposes a tri-hybrid precoder design, cascading digital, analog, and electromagnetic processing layers, for cell-free massive multiple-input multiple-output (CFmMIMO) systems. We jointly optimize the three-layer precoders and access point (AP) transmit power to maximize global energy efficiency (GEE) under per-AP power and fronthaul constraints. To solve this, we develop an alternating optimization algorithm. The first sub-routine maximizes sum spectral efficiency (SE) for precoder design using weighted minimum mean square error, Riemannian manifold optimization, and gradient ascent over Lorentzian phases. The second optimizes power allocation via Dinkelbach's fractional programming and successive convex approximation. Convergence and computational complexity are also analyzed. Simulation results show the proposed design improves GEE by 87% and 11% over fully digital and classical hybrid precoders, respectively, at 20dBm transmit power. Moreover, joint power optimization yields 22% SE and 16% GEE gains over equal-power baselines, while outperforming colocated architectures in SE. Finally, we identify GEE-optimal regimes for AP and RF chain counts, and demonstrate that increasing dynamic metasurface antenna sizes enhances GEE in low-power regimes with negligible active power overhead.

0.23

Harnessing Mutual Coupling in Cell-Free mMIMO

cs.IT eess.SP ·2026-11-02 ·Erind Tufa, Antonio A. D'Amico, Luca Sanguinetti
published similarity 0.58
Abstract

This letter investigates a cell-free massive MIMO system with $L$ access points (APs), each employing a small fixed-form-factor, uniform linear array of $N$ potentially closely spaced antennas. Utilizing multiport communication theory, we analyze the impact of mutual coupling on uplink and downlink spectral efficiency (SE) under various impedance-matching strategies. We compare two deployment regimes: ($i$) increasing $N$ while $L$ is kept fixed, and ($ii$) increasing $N$ while fixing the total antenna count $M = NL$. Numerical results show that, with a full matching network, mutual coupling itself becomes beneficial when an AP serves several user equipments, which is the typical operating regime of user-centric cell-free networks. Furthermore, with full matching, antenna densification can enhance SE or allow for a reduction in the number of APs without performance loss. Since full matching networks remain of manageable size in the small arrays of distributed APs, unlike in large centralized arrays, cell-free networks offer a natural setting for exploiting mutual coupling.

0.36

Beamforming Design Via GNN in mmWave Cell-Free Massive MIMO Using Sub-6 GHz CSI

eess.SP cs.LG ·2026-08-31 ·Sina Tavakolian, Abolfazl Zakeri, Ahmed Alkhateeb, Markku Juntti, Nhan Thanh Nguyen
published similarity 0.57
Abstract · 5 pages, 3 figures, Accepted for presentation at the 2026 IEEE 27th International Workshop on Signal Processing and Artificial Intelligence …

Beamforming methods in millimeter-wave (mmWave) cell-free massive multiple-input multiple-output (CFmMIMO) systems require accurate channel state information (CSI), whose acquisition entails significant training overhead. This paper shows that fully digital cell-free mmWave beamforming can be effectively learned from sub-6 GHz CSI using a graph neural network (GNN). Specifically, we represent a CFmMIMO system as a wireless graph, and the GNN is trained to approximate beamformers that maximize the downlink sum-rate based on the available sub-6 GHz CSI. A message-passing mechanism is proposed to capture inter-user interference and inter-base-station cooperation across different network topologies. Simulation results demonstrate that the proposed sub-6 GHz-assisted GNN-based beamformer achieves competitive and often superior sum-rate performance compared to classical baselines that rely on full mmWave CSI.

0.27

Multi-Band Indoor MIMO Channel Measurements Across Sub-6 GHz, Mid-Band and mmWave: Comparing 2.55 GHz, 12.75 GHz and 25.5 GHz

eess.SP ·2026-11-11 ·Faruk Pasic, Florian Kiss, Florian Asperger, Diego Dupleich, Stefan Schwarz +1 more
published similarity 0.57
Abstract · Submitted to the 21th European Conference on Antennas and Propagation (EuCAP), 2027

Future wireless systems for indoor applications are expected to extend their operating frequencies from sub-6 GHz to mid-band and millimeter wave (mmWave) frequencies to support higher data rates. To characterize the frequency-dependent propagation behavior across these bands, multi-band channel measurements are essential. In this work, we conduct double-directional multiple-input multiple-output (MIMO) channel measurements in an indoor environment to enable a consistent comparison across three frequency bands. Measurements are performed using a 16x16 MIMO configuration at center frequencies of 2.55 GHz, 12.75 GHz and 25.5 GHz, covering both line-of-sight (LOS) and obstructed line-of-sight (OLOS) conditions. The measured channels are processed using the space-alternating generalized expectation maximization (SAGE) algorithm to extract multipath parameters, which are subsequently used to characterize the angular power distributions across the three frequency bands. The results show substantial angular-domain similarity across all three bands in both LOS and OLOS conditions, while also highlighting frequency-dependent variations.

0.31

Feedback-Free FDD Cell-Free Massive MIMO With Sparse AP Activation and Dual-Mode Precoding

cs.IT eess.SP ·2026-11-19 ·Wei Jiang, Hans Dieter Schotten
similarity 0.57
Abstract · 5 pages, 3 figures. Submitted to IEEE Transactions on Vehicular Technology

This correspondence enables practical frequency-division duplex (FDD) operation in cell-free massive MIMO via two mechanisms. Sparse access-point (AP) activation reduces downlink pilot overhead to enable coherent detection, while angle-reciprocity precoding steers beams using only uplink-estimated angles, eliminating channel feedback entirely. A load-adaptive dual-mode optimizer further enhances performance: closed-form signal-to-leakage-and-noise-ratio precoding for high-load rate boosting, or semidefinite relaxation for low-load power minimization. Simulations verify its superiority over existing feedback-free FDD solutions in spectral and energy efficiency, and its robustness to angle errors, reciprocity mismatch, and multipath.

0.39

Efficient Alternating Optimization for Hybrid Digital-Wave Beamforming in SIM-Assisted Cell-Free Massive MIMO

eess.SP cs.IT ·2026-08-23 ·Eunhyuk Park, Seok-Hwan Park, Osvaldo Simeone, Marco Di Renzo
published similarity 0.56
Abstract · IEEE PIMRC 2026

Stacked intelligent metasurfaces (SIMs) have recently emerged as a promising architecture for large-scale beamforming systems, including cell-free massive MIMO (CF-mMIMO), due to their cost-effective wave-domain signal processing capabilities. However, existing algorithms for the joint optimization of digital and SIM-enabled wave-domain beamforming typically incur prohibitive computational complexity. In this work, we propose an efficient alternating optimization (AO) algorithm for weighted sum-rate maximization in SIM-assisted CF-mMIMO systems employing hybrid digital-wave beamforming. Unlike prior approaches that rely on general-purpose optimization solvers or per-element gradient ascent methods, the proposed algorithm updates the digital and wave-domain beamforming variables on a per-access point (AP) or per-SIM-layer basis, enabling closed-form updates at each step. Numerical results demonstrate that the proposed algorithm reduces the computational complexity by more than 99\% compared to existing algorithms while achieving nearly identical sum-rate performance.

0.42

Toward Massive MIMO HAPS Networks: Antenna Architectures and Design

eess.SP ·2026-11-18 ·Shasha Liu, Abla Kammoun, Mohamed Slim Alouini
survey similarity 0.56
Abstract · 8 pages, 3 Figures

High-altitude platform stations (HAPS) are expected to become an important component of sixth-generation (6G) and beyond wireless networks by providing wide-area wireless connectivity through massive multiple-input multiple-output (mMIMO) technology. As the communication performance of HAPS systems is fundamentally determined by the antenna array architecture, efficient antenna design has become a critical research topic. Motivated by these considerations, this article provides a comprehensive overview of antenna array design for mMIMO-enabled HAPS systems and proposes two novel antenna architectures to improve antenna-user alignment and communication performance. Specifically, the representative applications of mMIMO-enabled HAPS are first introduced, followed by the key design requirements for HAPS antenna arrays. Representative antenna architectures are then systematically reviewed and compared under a unified simulation framework based on the 3GPP NTN channel model. Finally, several promising research directions are discussed to provide insights into the design of next-generation intelligent HAPS antenna systems.

0.31