CS Paper Radar

LUNA: Luneburg-Lens-Aided Reconfigurable Array for 6G-and-Advanced Wireless Networks

Ziwei Wan, Zhen Gao, Shuping Dang, Michail Matthaiou, Zhaocheng Wang, Sheng Chen

eess.SP cs.IT ·submitted 2026-09-22 10:35 UTC · v2

Abstract

This article introduces the LUneburg-lens-aided recoNfigurable Array (LUNA), an antenna architecture that unifies multiple-input multiple-output (MIMO) and network-controlled repeater (NCR) functionalities in the Luneburg lens-enabled hardware platform. A Luneburg lens, fabricated from graded-index dielectric materials, passively converts the radiation of a low-gain feed into a highly directional beam without active phase shifting, while a dense passive feed bank and a reconfigurable feed-selection network electronically switch the beam directions with minimal hardware complexity and power consumption. We commence by reviewing the basic principles and application history of Luneburg lenses in radar and wireless communications, which motivates their role in 6G-and-advanced networks. Then, we highlight how a Luneburg lens and a reconfigurable feed array construct both LUNA-MIMO and LUNA-NCR, where the lens and feed bank can be reused across functions and frequency bands. Case studies demonstrate that LUNA achieves the satisfactory spectral and energy efficiency with a few radio-frequency chains, and it also improves positioning performance for sensing tasks. Finally, some open problems and research directions are provided to inspire follow-up research on LUNA.

Comment
7 pages, 5 figures, 1 table, submitted to IEEE journal for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.58
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

Dynamic Metasurface Antennas: From Programmable Microwave Hardware to Next-Generation Wireless Systems

eess.SP ·2026-09-24 ·Abdul Jabbar, William Whittow
similarity 0.57
Abstract

As wireless systems evolve toward 6G and beyond, antenna apertures are increasingly expected to become more programmable, multifunctional, and responsive to diverse communication, sensing, and imaging requirements. Dynamic metasurface antennas (DMAs) offer a promising hardware pathway toward this vision by integrating electronically addressable metamaterial elements within microwave and millimeter-wave (mmWave) radiating apertures. Unlike conventional phased arrays relying on dedicated phase-shifting networks, DMAs manipulate guided waves in microwave structures through electronically controlled resonant elements. In this way, DMAs offer phase-shifter-less beam-steering, multibeam radiation, and programmable wavefront control. This article explores state-of-the-art DMA technology from a microwave-engineering perspective, spanning guided-wave excitation, reconfigurable resonant meta-elements, microwave tuning technologies, RF-digital integration, and FPGA-controlled beamforming. Closely related electronically steered metasurface antenna architectures are also discussed within a unified microwave-hardware framework. Recent advances illustrating how guided-wave DMA hardware and high-speed electronics facilitate programmable communication, sensing, imaging, and space-time functionalities are reviewed. Key microwave design challenges toward wideband, scalable, and highly integrated DMA apertures are highlighted. Finally, emerging opportunities in satellite communications, near-field connectivity, fixed wireless access, wave-domain computing, and integrated wireless functionalities are explored as future directions for DMA technology. This article provides a unified microwave engineering perspective on the design, practical implementation, and emerging capabilities of DMAs as programmable front-ends for next-generation wireless systems.

0.26

RF Chain Count to Mitigate Beam Split in Wideband Hybrid Arrays: From Far-Field to Near-Field

eess.SP ·2026-10-05 ·Ahmed Hussain, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil
similarity 0.57
Abstract

Deploying large antenna arrays transitions wireless communication into the radiative near-field (NF), where spherical wavefronts enable beamfocusing in the joint angle-distance domain. However, wideband beamforming with large antenna arrays suffers from beam split across both spatial dimensions. Although fully digital arrays can eliminate this impairment, their prohibitive hardware cost and power consumption motivate the adoption of hybrid array architectures equipped with a limited number of radio-frequency (RF) chains. This paper investigates the minimum number of RF chains required to mitigate the beam split. We derive closed-form expressions for the required number of RF chains in fully-connected (FC) architectures and propose an algorithm for sub-connected (SC) architectures, considering both uniform linear arrays (ULAs) and uniform circular arrays (UCAs). Our analysis reveals that beyond a focal distance of 10L, where L denotes the aperture length, the NF RF chain count converges to its far-field counterpart and becomes a function of the angle alone. Moreover, the FC hybrid architecture mitigates the beam split by using fewer RF chains than the SC architecture, albeit at the cost of increased complexity in the phase shifter network.

0.14

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

eess.SP ·2026-08-17 ·Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci +1 more
similarity 0.56
Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

0.34

The Price of the Golden 6G Band: Evaluation of Beam Management Effort in FR3

cs.NI ·2026-09-15 ·Clémence Altmeyerhenzien, Ljiljana Simić, Marina Petrova
published similarity 0.56
Abstract · 6 pages, 10 figures. Accepted for Publication in the IEEE GLOBECOM 2026 Conference

Frequency Range 3 (FR3), 7.125-24.25 GHz, regarded as the "golden band" for 6G networks, has less challenging propagation characteristics than FR2 while offering much wider bandwidth for high data rate applications than FR1. Reusing existing FR1 infrastructure for FR3 network deployments requires gNodeBs (gNBs) to employ antenna arrays and perform beam management, which has proven challenging at FR2. In this paper, we extensively study and characterize the beam management effort in an FR3 urban network, in terms of: beam alignment sensitivity, number of directional link opportunities, gNB handover and beam switch rates, and beam steering distance. Our results show that achieving a high and stable mobile throughput requires significant beam management effort across FR3 bands. While the beam tracking requirements are less stringent at the lower frequencies due to wider beams, the beam switching rate to a non-adjacent beam is relatively comparable at FR3 and FR2.

0.38

A New Paradigm of 6G Networks: Proactive Channel Cognition and Reconfiguration

eess.SP ·2026-08-30 ·Wenyan Ma, Zixiang Ren, Weitong Zhai, Ge Yan, Lipeng Zhu +2 more
survey similarity 0.54
Abstract

The sixth-generation (6G) wireless networks are expected to enable the deep integration of communication, sensing, computing, control, and intelligence in highly dynamic environments. This evolution drives a fundamental transition from conventional passive channel adaptation to proactive channel cognition and reconfiguration, wherein wireless channels are no longer regarded as uncontrollable propagation media but as network resources that can be learned, predicted, and actively reconfigured. This paper presents a comprehensive overview of this emerging paradigm. We first review channel cognition through the channel knowledge map (CKM) as a systematic framework for learning and exploiting channel characteristics across space, time, and frequency domain. The definitions, construction methods, and applications in wireless networks of CKMs are comprehensively reviewed. Building upon channel cognition, we then review channel reconfiguration technologies from two complementary perspectives: transceiver-side reconfiguration enabled by movable antennas (MAs) and environment-side reconfiguration enabled by intelligent reflecting surfaces (IRSs). For both MA- and IRS-enabled wireless systems, we review their architectures, performance advantages, and key design challenges. Finally, we discuss several promising research directions to inspire further innovations in this burgeoning field.

0.15

Hierarchical Beam Training and Codebook Design for Movable Antenna-Assisted Near-Field Systems

cs.IT ·2026-09-03 ·Meihui Liu, Qian Zhang, Xuejun Cheng, Yuhui Jiao, Yunxiao Li +1 more
published similarity 0.53
Abstract

As sixth-generation (6G) communication systems evolve toward higher frequency bands and larger array apertures, the near-field range expands rapidly, making near-field channel estimation increasingly important and challenging. Beam training has been recognized as an effective approach for channel state information (CSI) acquisition. However, because of the propagation characteristics of spherical waves, beam training needs to perform a joint search in the angle and distance domains, which results in unaffordable beam training overhead. By flexibly reconfiguring antenna positions, movable antenna (MA) technology can fully exploit the spatial variations of wireless channels and achieve more accurate beam focusing, thereby providing additional flexibility for efficient beam training design. Therefore, based on MA-assisted near-field systems, we develop a hierarchical beam training strategy that combines reduced training overhead with high beam gain and design a corresponding hierarchical codebook. This codebook forms focused beams over the joint angle-distance domain, maximizing beam gain within the target region while suppressing energy leakage into non-target regions. Simulation results confirm substantial performance gains of the method over the conventional fixed-position antenna (FPA) system and the far-field beam training method.

0.49

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.52
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30