CS Paper Radar

The Price of the Golden 6G Band: Evaluation of Beam Management Effort in FR3

Clémence Altmeyerhenzien, Ljiljana Simić, Marina Petrova

cs.NI ·submitted 2026-09-15 08:34 UTC · v1
published

Abstract

Frequency Range 3 (FR3), 7.125-24.25 GHz, regarded as the "golden band" for 6G networks, has less challenging propagation characteristics than FR2 while offering much wider bandwidth for high data rate applications than FR1. Reusing existing FR1 infrastructure for FR3 network deployments requires gNodeBs (gNBs) to employ antenna arrays and perform beam management, which has proven challenging at FR2. In this paper, we extensively study and characterize the beam management effort in an FR3 urban network, in terms of: beam alignment sensitivity, number of directional link opportunities, gNB handover and beam switch rates, and beam steering distance. Our results show that achieving a high and stable mobile throughput requires significant beam management effort across FR3 bands. While the beam tracking requirements are less stringent at the lower frequencies due to wider beams, the beam switching rate to a non-adjacent beam is relatively comparable at FR3 and FR2.

Comment
6 pages, 10 figures. Accepted for Publication in the IEEE GLOBECOM 2026 Conference

Closest papers

Nearest neighbours by meaning across the whole index.

Half-Slot Link Scheduling for Open GNSS with $x$-Tx $y$-Rx Multibeam Phased Array Antennas

eess.SY ·2026-10-22 ·Huan Yan, Kanglian Zhao, Wenfeng Li, Jinjun Zheng, Ziyu Wang +1 more
similarity 0.57
Abstract · 20 pages and 10 figs

Global Navigation Satellite Systems (GNSSs) are evolving from closed navigation constellations toward open space infrastructure capable of serving extensive spacecraft users. This evolution requires the constellation to support navigation ranging, telemetry (TM) return, and telecommand (TC) delivery for users while preserving its own ranging and communication functions.Existing phased-array payloads onboard BeiDou satellites provide one transmit (Tx) beam and one receive (Rx) beam. Such a configuration was designed mainly for intra-constellation operation, and can become a resource bottleneck when a large number of users share the same link opportunities. Upgrading GNSS satellites to phased-array terminals with $x$-Tx and $y$-Rx beams is therefore a natural enhancement. This paper develops a staged dynamic half-slot link scheduling framework (SDHSS) for open GNSS with $x$-Tx $y$-Rx multibeam phased-array antennas. The framework models navigation, TM, and TC as three different services, reserves the essential ranging and ground-access opportunities required by the GNSS constellation, and then allocates the remaining half-slot beam resources according to current service demand. To support multibeam concurrency, feasible links are selected through dynamic service-layer ordering and beam-copy matching. Simulations based on a BeiDou constellation show that the proposed method protects GNSS baseline operation and provides stronger external navigation, TM, and TC performance than fair contact planning. The results further show that additional Tx and Rx beams can be effectively converted into multi-service capability. This work establishes a link-scheduling approach for extending GNSS from constellation-internal operation to large-scale spacecraft service support.

0.30

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.57
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

Movable-Element STAR-RIS for 6G Non-Terrestrial Networks: Architectures, Enabling Technologies, and Open Challenges

eess.SP ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.57
Abstract · 9, 4

Non-terrestrial networks (NTNs) are emerging as a key component of 6G systems by extending ubiquitous and resilient connectivity across satellite, aerial, and terrestrial layers. However, severe propagation loss, rapidly varying geometry, Doppler, blockage, and stringent payload and energy constraints make efficient beam and propagation control particularly challenging. Movable-element STAR-RIS (ME-STAR-RIS) offers a new approach by combining full-space transmission/reflection control with reconfigurable surface geometry, thereby introducing an additional spatial degree of freedom for geometry-aware NTN operation. In this article, we first describe the operating principle, movement constraints, and potential hardware realizations of ME-STAR-RIS, and then present representative satellite-borne, aerial-relay, and cross-tier NTN architectures. We discuss the key enabling mechanisms, including joint geometry--electromagnetic optimization, mobility-aware channel acquisition, multi-timescale control, and predictive configuration. A LEO-centered numerical case study compares ME-STAR-RIS with an otherwise identical fixed STAR-RIS and demonstrates the benefit of element mobility across different transmit powers, movement ranges, and surface sizes, while revealing diminishing returns from increasingly large displacements. Finally, we discuss the main hardware, CSI, scalability, near-field, sensing, security, reliability, and standardization challenges, and highlight promising directions toward practical ME-STAR-RIS-enabled NTNs

0.18

LUNA: Luneburg-Lens-Aided Reconfigurable Array for 6G-and-Advanced Wireless Networks

eess.SP cs.IT ·2026-09-22 ·Ziwei Wan, Zhen Gao, Shuping Dang, Michail Matthaiou, Zhaocheng Wang +1 more
similarity 0.56
Abstract · 7 pages, 5 figures, 1 table, submitted to IEEE journal for possible publication

This article introduces the LUneburg-lens-aided recoNfigurable Array (LUNA), an antenna architecture that unifies multiple-input multiple-output (MIMO) and network-controlled repeater (NCR) functionalities in the Luneburg lens-enabled hardware platform. A Luneburg lens, fabricated from graded-index dielectric materials, passively converts the radiation of a low-gain feed into a highly directional beam without active phase shifting, while a dense passive feed bank and a reconfigurable feed-selection network electronically switch the beam directions with minimal hardware complexity and power consumption. We commence by reviewing the basic principles and application history of Luneburg lenses in radar and wireless communications, which motivates their role in 6G-and-advanced networks. Then, we highlight how a Luneburg lens and a reconfigurable feed array construct both LUNA-MIMO and LUNA-NCR, where the lens and feed bank can be reused across functions and frequency bands. Case studies demonstrate that LUNA achieves the satisfactory spectral and energy efficiency with a few radio-frequency chains, and it also improves positioning performance for sensing tasks. Finally, some open problems and research directions are provided to inspire follow-up research on LUNA.

0.28

Challenges and Opportunities in the Transition from 5G to 6G Networks

cs.NI ·2026-09-10 ·Yousef Tahboub, Krishna Bodige, Ryan Tipping
similarity 0.55
Abstract

The rapid adoption of 5G revolutionized connectivity worldwide, enabling faster data transfer along withthe support of a variety of use cases. However, next-gen technologies demand higher performance, as the limitations of 5G become increasingly apparent. The 6G network transition is approaching but comes with unique challenges, particularly with spectrum management, security, and data transmission. The present research considers the most significant challenges that must be addressed for a smooth and successful 5G-6G transformation to occur. Based on case studies and academic literature, the research employs a comparative approach and statistical analysis to evaluate 5G limitations and assess the innovative potential of 6G. The envisioned contribution is the identification of the most significant technical, regulatory, and security vulnerabilities, along with proposed solutions. Through these alternatives, the research will help to identify 6G networks that are secure, resilient, and applicable globally for use and additional critical infrastructure support.

0.16

Decomposing URLLC Deadline Failures in Beam-Managed 6G Networks: Implications for Mission-Critical Wireless Systems

cs.IT ·2026-10-14 ·Webert Montlouis, Sneihil Gopal
similarity 0.55
Abstract

Mission-critical wireless systems require ultra-reliable low-latency communications (URLLC), which sixth-generation (6G) millimeter-wave (mmWave) beam-managed networks are designed to provide. However, the reported URLLC deadline miss rate often masks the specific causes of packet failures. This paper introduces a framework that categorizes missed URLLC packets into three causes: queueing-limited (Q), transmission-limited (T), and beam-tracking-limited (B). Our analysis across ten scenarios with antenna counts from $\mathbf{64}$ to $\mathbf{4096}$ reveals three key findings. First, the dominant cause of missed packets shifts from Q to B when the antenna count exceeds roughly $\mathbf{1825}$. Therefore, operators of hyper-massive arrays should focus on improving beam-tracking accuracy to reduce the miss rate. Second, the beam-sweep period ($T_{\mathrm{sw}}$) significantly affects B-misses, while Q and T remain relatively unchanged. Reducing $T_{\mathrm{sw}}$ from $\mathbf{20}$ms to $\mathbf{10}$ms can cut the B-misses by more than half, without requiring a redesign of the scheduler. Third, Q-misses reach a cumulative distribution function (CDF) of approximately $\mathbf{0.98}$ by $\mathbf{0.8}\,$ms, so modest latency-budget relaxation can accommodate most overruns. In contrast, B-misses remain unsaturated at $\mathbf{12}\,$ms, making them difficult to accommodate within practical application-layer latency limits. Overall, this framework transforms an ambiguous aggregate miss-rate metric into a clear three-way diagnostic tool that directly informs remedial actions for network operators.

0.26

PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3

eess.SP ·2026-10-02 ·Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte +2 more
published similarity 0.55
Abstract · 5 pages, 3 figures, 3 tables. Presented at the 2026 Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, CA, USA, Oct. 25-…

Upper mid-band spectrum is promising for 5G and 6G cellular networks, yet concrete and low-emissivity glass impose over 20 dB of building penetration loss above 2 GHz, degrading outdoor-to-indoor (O2I) coverage. A reconfigurable intelligent surface (RIS) on a neighboring building bypasses this blockage by focusing energy onto indoor users. This paper introduces PRIMO (Parallel RIS Min-Rate Optimization), a training-free joint optimizer of base-station precoding, RIS phase shifts, and RIS placement, validated by calibrated ray tracing in a MetroTech Commons digital twin (Brooklyn, NY) at 6.75 and 16.95 GHz. At equal physical aperture, half-wavelength spacing packs 6.25 times as many elements per array at FR3 as at FR1(C), so FR1(C) leads at low indoor-user counts while FR3 dominates at higher counts, where the additional spatial degrees of freedom suppress inter-user interference. Above a 1 bps/Hz service floor, PRIMO supports 92% more indoor users at FR3 than at FR1(C), and raises the minimum user rate by up to 90% over a fully converged alternating-optimization baseline while running about 100 times faster.

0.38

Measurement-Based FR3 Urban Macrocell Channel Characterization and Coverage Analysis

eess.SP ·2026-09-20 ·Enrui Liu, Pan Tang, Haiyang Miao, Qi Zhen, Jianhua Zhang
similarity 0.53
Abstract · 6 pages, 11 figures, conference

The 6--18~GHz upper mid-band is a promising spectrum range for future sixth-generation (6G) networks due to its favorable balance between available bandwidth and propagation capability, while its same-site coverage performance remains a key deployment concern. This paper presents a wideband channel measurement campaign at 13 spatially aligned frequency points from 6 to 18~GHz in an urban macrocell (UMa) environment, and investigates the frequency evolution of channel characteristics and same-site coverage capability. The results show that path loss generally increases with frequency, while the higher-frequency channels tend to exhibit smaller root-mean-square (RMS) delay spread (DS) and larger PDP-based $K$-factors. Based on the measured path-loss characteristics, the additional link-budget requirement and service-aware same-site coverage are further evaluated. Under the baseline service configuration, the 80\% coverage distance $d_{80}$ decreases from approximately 129~m at 6~GHz to 58~m at 18~GHz. Further analysis quantifies the impacts of service rate, resource allocation, interference, and link-budget degradation on coverage, providing measurement-based insights for same-site deployment across the 6--18~GHz band.

0.20