CS Paper Radar

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci, Tareq Y. Al-Naffouri

eess.SP ·submitted 2026-08-17 21:00 UTC · v1

Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Reconfigurable Antenna-Enhanced ISAC: A Unified Perspective on Electromagnetic Adaptation

eess.SP ·2026-11-03 ·Peilan Wang, Lei Xie, Weidong Mei, Jun Fang, Yihong Su +1 more
similarity 0.68
Abstract

Integrated sensing and communication (ISAC) enables sensing and communication (S&C) functions to share time, frequency, and hardware resources, offering an efficient paradigm for next-generation wireless systems. However, conventional fixed-configuration antenna (FCA) architectures provide limited flexibility in adapting the physical electromagnetic (EM) response of the end-to-end wireless link. This article develops a unified EM-adaptation perspective on reconfigurable antenna (RA)-enhanced ISAC systems. We distinguish transceiver-side (TSc-side) and environment-side (Env-side) RA deployments and identify five fundamental EM reconfiguration dimensions: position, orientation, radiation pattern, polarization, and frequency response. Building on this framework, we examine how these dimensions customize communication channels, actively control target information mapping for sensing, and reshape the interplay between S&C, particularly by improving compatibility between S&C requirements under shared resources. Two case studies illustrate how TSc-side and Env-side EM reconfiguration can improve spatial selectivity and the achievable S&C performance tradeoff. Finally, we discuss several promising directions for advancing RA-enhanced ISAC systems, including fundamental performance limits, low-overhead black-box optimization, and artificial intelligence (AI)-enabled semantic ISAC.

0.19

Mutual-Coupling-Aware Electromagnetic and Signal Processing Co-Design for Pixel Antenna Arrays

eess.SP ·2026-10-06 ·Ping Ma, Mengzhen Liu, Rang Liu, Ming Li, A. Lee Swindlehurst
similarity 0.67
Abstract · 7 pages, 5 figures, fonference

Reconfigurable pixel antenna arrays provide additional electromagnetic (EM) degrees of freedom for wireless transmission by enabling hardware-level adaptation of radiation responses. In practical arrays, inter-element mutual coupling (MC) alters the switch-state-dependent responses, causing MC-unaware designs to be mismatched with the realized coupled-array channels. To address this issue, we propose an MC-aware EM and signal-processing co-design framework for downlink multi-user multiple-input single-output (MU-MISO) systems. The full pixel antenna array is modeled as a unified multi-port circuit network that jointly characterizes the feed ports and switch-controlled pixel ports. By combining the impedance matrix extracted from Computer Simulation Technology (CST) Studio Suite simulations with the full-array open-circuit far-field responses, we construct a switch-state-dependent EM-domain channel that explicitly captures both intra-antenna pixel coupling and inter-element MC. Based on this model, we formulate a sum-rate maximization problem over the binary switch-state vector and the transmit precoder. To address the resulting mixed-integer non-convex problem, we develop an alternating optimization algorithm in which the binary switch-state vector is updated via sequential exhaustive block optimization (SEBO), while the transmit precoder is optimized using fractional programming (FP). CST-based simulations show that the proposed MC-aware design outperforms MC-unaware, MC-free, and conventional patch-array baselines. These results demonstrate that accurate MC modeling is essential not only for reducing model mismatch, but also for exploiting the coupled embedded responses of practical pixel antenna arrays.

0.41

Finite-Aperture Modeling of Pattern-Reconfigurable Antennas for Multiuser Beamforming

eess.SP ·2026-10-07 ·Kangjian Chen, Han Qing Yang, Hang Wong
similarity 0.64
Abstract · 14 pages, 11 figures; submitted to IEEE for possible publication

This paper establishes a finite-aperture model for pattern-reconfigurable antennas (PRAs) and exploits its aperture-constrained Fourier representation to develop an efficient multiuser beamforming framework. First, we develop an ideal model by representing the complex radiation pattern using a Fourier series. By applying the Jacobi-Anger expansion, we relate the antenna aperture to the effective Fourier order and derive aperture-dependent power bounds for individual Fourier coefficients. Second, we employ a practical multiport network model and design three representative reconfigurable pixel antennas to verify the predicted effective Fourier orders and per-order power constraints. We then formulate weighted sum-rate maximization for multiuser downlink transmission under both models. Using bounded Fourier coefficients as auxiliary variables, we develop a coefficient-bound penalty-based weighted minimum mean-square error algorithm that separates continuous beamforming from discrete switch-state optimization. We further propose a one-bit neighborhood search that exploits the Sherman-Morrison identity to accelerate the discrete optimization. Simulation results validate the physical relevance of the ideal model and demonstrate multiuser sum-rate gains and reduced optimization runtime for densely switched antennas. The proposed model provides a physically grounded basis for PRA-enabled communication analysis and design, while the framework accommodates different beamforming objectives and PRA implementations.

0.32

Joint EM-BB Beamforming Design for ISAC Systems With Reconfigurable Antenna Arrays

eess.SP ·2026-10-06 ·Jvxiang Hu, Mengzhen Liu, Rang Liu, Qian Liu, Ming Li
benchmark similarity 0.62
Abstract · 6 pages, 4 figures, conference

This paper investigates the joint electromagnetic (EM)-domain and baseband (BB)-domain beamforming for integrated sensing and communication (ISAC) systems enabled by pattern- and polarization-reconfigurable pixel-antenna arrays. A multiport-network-based antenna model is developed to map each binary switch configuration to its radiation response using the impedance and open-circuit radiation data extracted from Computer Simulation Technology (CST) Studio Suite simulations. Based on this model, polarization-aware virtual channels are constructed for downlink communication and statistical target sensing, leading to a mixed-integer nonconvex problem that maximizes the average sensing signal-to-noise ratio (SNR) subject to user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. To handle the coupled binary and continuous variables, we propose an alternating optimization algorithm, in which the EM-domain switch-state matrices are updated using successive exhaustive Boolean optimization (SEBO), the BB-domain precoder is optimized via a minorization-maximization (MM) and second-order cone programming (SOCP) procedure, and the sensing combiner is obtained from a Rayleigh-quotient update. Simulation results show that the proposed design achieves higher sensing SNR and stronger target-angle robustness than the fixed-patch benchmark.

0.30

Finite-Resolution Microwave Linear Analog Computer (MiLAC)-Aided Multiuser Beamforming

eess.SP cs.IT ·2026-09-28 ·Zheyu Wu, Bruno Clerckx
theory similarity 0.62
Abstract · 16 pages, 7 figures, submitted to IEEE for possible publication

Large-scale antenna arrays are essential to future wireless networks but impose significant hardware and digital-processing burdens. The microwave linear analog computer (MiLAC) offers a promising architecture for addressing these challenges. In a MiLAC, beamforming is realized entirely in the analog domain through a reconfigurable multiport microwave network comprising tunable admittance elements. However, existing studies assume that these elements are continuously tunable, whereas practical implementations can support only finitely many configurable states. This paper investigates finite-resolution MiLAC-aided multiuser beamforming under lossless and reciprocal constraints with prescribed connectivity patterns. Each tunable susceptance is selected from a symmetric uniform finite-resolution codebook. We formulate an online problem that jointly optimizes the discrete susceptances and power allocation for a prescribed codebook, and an offline problem that designs the codebook based on channel statistics. By exploiting the odd-uniform codebook structure, we express each multilevel susceptance as a weighted sum of two-level variables and develop exact continuous penalty models for both the online beamforming and offline codebook design problems. We prove that, for sufficiently large penalty parameters, these penalty models are globally equivalent to their original discrete counterparts. Building on these formulations, we develop efficient ADMM-based algorithms for solving the two problems. Numerical results demonstrate that the performance of an unquantized fully-connected MiLAC can be approached with substantially reduced connectivity and finite resolution. In particular, a 3-bit stem-connected MiLAC achieves more than 95% of the sum-rate performance of the unquantized fully-connected MiLAC while requiring only 22% of its tunable components.

0.41

Electromagnetic Information Theory for Programmable Metasurfaces

eess.SP physics.optics ·2026-11-02 ·Philipp del Hougne, Marco Di Renzo, Owen D. Miller, David A. B. Miller
position similarity 0.61
Abstract · 17 pages with 3 figures

Programmable metasurfaces enable fine-grained control of electromagnetic waves and are creating new opportunities for information extraction, information transfer and information processing. Yet, despite exciting experimental demonstrations, their fundamental capabilities remain poorly understood. In this Perspective, we argue that programmable metasurfaces, and programmable wave systems more generally, call for an electromagnetic information theory that addresses limits at two levels, in a unified manner across applications like communications, sensing and computing. First, for a given physical platform, such a theory should bound achievable information manipulations, such as sensing precision, information-transfer rates, and computational performance. Second, at a more fundamental level, it should determine what non-programmable and programmable physical resources bound these system-specific limits, and what minimum resources are required to attain a prescribed level of performance. We discuss emerging theoretical approaches to these questions, and their connection to experimentally realizable systems. We examine how device thickness, programmable degrees of freedom, nonlocality, coupling and multiple scattering constrain these limits. Establishing the envisioned framework could clarify the ultimate capabilities of programmable metasurfaces and guide the design of future wave-based information systems.

0.27

Sparse Port Selection under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Haoyu Liang, Zaichen Zhang, Jian Dang
similarity 0.60
Abstract

Fluid antenna systems obtain spatial degrees of freedom by reconfiguring antenna positions within a confined region, a principle that extends to beamforming: shaped beams can be synthesized using far fewer radio-frequency feeds than candidate antenna positions. When the candidates are densely arranged, however, electromagnetic mutual coupling changes the relationship among terminal voltages, induced currents, and radiated fields, so an uncoupled model no longer describes the hardware and may activate an unsuitable set of ports, distorting the synthesized pattern. This paper develops a mutual-coupling-aware framework that converts the desired beam amplitude into a finite-aperture-compatible complex target and models the complete antenna lattice as a coupled multiport network, selecting the active ports and their source voltages through the coupled voltage-to-field response. Inactive candidate ports remain part of the network and carry induced currents, and every compared design is evaluated through the same electromagnetic model under the same source-voltage budget. Numerical results show that the mutual-coupling-aware design improves both the average mainlobe signal-to-noise ratio (SNR) and the peak sidelobe level (PSLL) over coupling-unaware selection and a fixed array, demonstrating that mutual coupling should be exploited in the design itself rather than compensated only in the final evaluation.

0.38

Properties of Array Factor of Reconfigurable Intelligent Surfaces for Radio Communications

eess.SP cs.IT ·2026-10-12 ·Symeon Vaidanis, Athanasios D. Panagopoulos
published similarity 0.60
Abstract · This work has been accepted for publication in 2024 IEEE INC-USNC-URSI Radio Science Meeting (Joint with AP-S Symposium)

This paper delves into the intricate aspects of Reconfigurable Intelligent Surfaces (RIS) in the antenna design. It investigates the properties of the array factor of RIS, highlighting the significance of phase shifts in establishing of the reflect path. Additionally, the paper investigates spatial positions requiring identical phase shifts, nullification of the array factor, the count of total maxima, second maximum determination (amplitude of the second lobe), and the calculation of the 3dB bandwidth. They are very useful for RIS-assisted radio communication systems.

0.40