CS Paper Radar

Mutual-Coupling-Aware Electromagnetic and Signal Processing Co-Design for Pixel Antenna Arrays

Ping Ma, Mengzhen Liu, Rang Liu, Ming Li, A. Lee Swindlehurst

eess.SP ·submitted 2026-10-06 15:39 UTC · v1

Abstract

Reconfigurable pixel antenna arrays provide additional electromagnetic (EM) degrees of freedom for wireless transmission by enabling hardware-level adaptation of radiation responses. In practical arrays, inter-element mutual coupling (MC) alters the switch-state-dependent responses, causing MC-unaware designs to be mismatched with the realized coupled-array channels. To address this issue, we propose an MC-aware EM and signal-processing co-design framework for downlink multi-user multiple-input single-output (MU-MISO) systems. The full pixel antenna array is modeled as a unified multi-port circuit network that jointly characterizes the feed ports and switch-controlled pixel ports. By combining the impedance matrix extracted from Computer Simulation Technology (CST) Studio Suite simulations with the full-array open-circuit far-field responses, we construct a switch-state-dependent EM-domain channel that explicitly captures both intra-antenna pixel coupling and inter-element MC. Based on this model, we formulate a sum-rate maximization problem over the binary switch-state vector and the transmit precoder. To address the resulting mixed-integer non-convex problem, we develop an alternating optimization algorithm in which the binary switch-state vector is updated via sequential exhaustive block optimization (SEBO), while the transmit precoder is optimized using fractional programming (FP). CST-based simulations show that the proposed MC-aware design outperforms MC-unaware, MC-free, and conventional patch-array baselines. These results demonstrate that accurate MC modeling is essential not only for reducing model mismatch, but also for exploiting the coupled embedded responses of practical pixel antenna arrays.

Comment
7 pages, 5 figures, fonference

Closest papers

Nearest neighbours by meaning across the whole index.

Joint EM-BB Beamforming Design for ISAC Systems With Reconfigurable Antenna Arrays

eess.SP ·2026-10-06 ·Jvxiang Hu, Mengzhen Liu, Rang Liu, Qian Liu, Ming Li
benchmark similarity 0.72
Abstract · 6 pages, 4 figures, conference

This paper investigates the joint electromagnetic (EM)-domain and baseband (BB)-domain beamforming for integrated sensing and communication (ISAC) systems enabled by pattern- and polarization-reconfigurable pixel-antenna arrays. A multiport-network-based antenna model is developed to map each binary switch configuration to its radiation response using the impedance and open-circuit radiation data extracted from Computer Simulation Technology (CST) Studio Suite simulations. Based on this model, polarization-aware virtual channels are constructed for downlink communication and statistical target sensing, leading to a mixed-integer nonconvex problem that maximizes the average sensing signal-to-noise ratio (SNR) subject to user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. To handle the coupled binary and continuous variables, we propose an alternating optimization algorithm, in which the EM-domain switch-state matrices are updated using successive exhaustive Boolean optimization (SEBO), the BB-domain precoder is optimized via a minorization-maximization (MM) and second-order cone programming (SOCP) procedure, and the sensing combiner is obtained from a Rayleigh-quotient update. Simulation results show that the proposed design achieves higher sensing SNR and stronger target-angle robustness than the fixed-patch benchmark.

0.30

Mutual-Coupling-Aware Joint Precoding and Antenna Positioning for Movable-Antenna MU-MIMO Systems

cs.IT eess.SP ·2026-11-03 ·Wei Guo, Tianyi Liao, Zixin Wang, Shenghui Song, Jun Zhang +1 more
similarity 0.68
Abstract · 13 pages, 6 figures, submitted to an IEEE Journal for possible publication

Movable antennas (MAs) improve wireless communications by adapting antenna positions to the propagation environment. However, antenna movement also changes the mutual coupling (MC) among elements of the transmit and receive arrays, which affects the performance of MA-enabled systems. In this paper, we investigate MC-aware joint precoding and antenna positioning for a downlink multiuser multiple-input multiple-output (MU-MIMO) system with MAs at both the base station and users. We establish an MC-aware system model by combining field-response propagation with a circuit-based representation of the transmit and receive arrays. Based on this model, we formulate a weighted sum-rate (WSR) maximization problem that jointly optimizes multi-stream precoders and antenna positions. The problem is challenging because the precoders and positions are coupled through the propagation channels and position-dependent MC matrices. To address this challenge, we reformulate the problem in the antenna-current domain to to efficiently handle the MC matrices and develop a current-domain weighted minimum mean square error (WMMSE) framework for alternating optimization. Furthermore, we handle the nonconvex position updates within the framework by using majorization--minimization (MM) and solve the resulting convex subproblems with a dedicated conic alternating direction method of multipliers (ADMM) algorithm. Simulation results demonstrate that the proposed design improves the WSR over both an MC-aware fixed array and a movable-array design that ignores MC during optimization.

0.28

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

eess.SP ·2026-08-17 ·Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci +1 more
similarity 0.67
Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

0.34

Tri-Hybrid Beamforming for T-RIS-Enabled Base Station

cs.IT ·2026-08-20 ·Hongtao Zhang, Chenlong Ding
similarity 0.63
Abstract

Transmissive reconfigurable intelligent surfaces (T-RISs) integrated into the transmitter provide a viable realization of tri-hybrid multiple-input multiple-output (MIMO), where spatial processing is distributed across the digital, analog radio-frequency (RF), and electromagnetic (EM) domains. However, unlike conventional RIS-assisted links, a transmitter-native T-RIS directly participates in radiation formation, making T-RIS front-end modeling and weighted sum-rate (WSR)-oriented joint precoding challenging under practical hardware constraints. This paper develops a unified modeling and precoding framework for transmitter-native T-RIS tri-hybrid multi-user (MU) downlink transmission. Specifically, starting from a continuous-field description, the received field is characterized by the interaction among the feed array, the programmable T-RIS aperture, and the user-side propagation, leading to a cascaded baseband input-output model for MU precoding. Furthermore, the same representation is instantiated in the Fresnel, Fraunhofer, and mixed-field regimes, so that near-field focusing and far-field angular steering can be handled within one front-end model. Additionally, a WSR maximization problem is formulated over the digital precoder, analog network, and T-RIS coefficients under power and quantization constraints. A two-level solver is then developed by coupling outer weighted minimum mean-square error (WMMSE) updates with WMMSE-induced aperture-field shaping and hardware projection. Simulations validate the modeling accuracy and convergence, and show that the proposed full tri-hybrid design improves WSR over baselines while suppressing mixed-field cross-regime leakage.

0.17

Pinching Antenna-Assisted Full-Duplex Communication Systems

cs.IT ·2026-09-24 ·Xuan Li, Xianfu Lei, Mingjiang Wu, Sotiris A. Tegos, Panagiotis D. Diamantoulakis +1 more
similarity 0.60
Abstract

Full-duplex (FD) communication theoretically doubles spectral efficiency. Despite this potential, its practical performance is primarily constrained by severe self-interference (SI) and co-channel interference. Moreover, conventional fixed antenna arrays suffer from limited spatial flexibility, resulting in insufficient spatial isolation for SI suppression. To address this issue, this letter proposes an FD architecture assisted by pinching antenna systems (PASS). By dynamically adjusting transmit and receive antenna positions, the system enables large-scale channel reconfiguration, thereby synergizing with the base station (BS) beamforming to suppress SI and enhance the desired signal reception. To demonstrate the potential of PASS for FD communication, we formulate a weighted sum-rate maximization problem that jointly optimizes antenna positions, BS beamforming, and power allocation. To tackle this non-convex problem, we reformulate it using the weighted minimum mean square error (WMMSE) framework and develop an efficient alternating optimization (AO) algorithm to iteratively update the optimization variables. Simulation results reveal that the proposed PASS-assisted FD architecture significantly outperforms conventional fixed antenna arrays, achieving substantial sum-rate gains while effectively mitigating SI to enable FD operation.

0.14

Sparse Port Selection under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Haoyu Liang, Zaichen Zhang, Jian Dang
similarity 0.59
Abstract

Fluid antenna systems obtain spatial degrees of freedom by reconfiguring antenna positions within a confined region, a principle that extends to beamforming: shaped beams can be synthesized using far fewer radio-frequency feeds than candidate antenna positions. When the candidates are densely arranged, however, electromagnetic mutual coupling changes the relationship among terminal voltages, induced currents, and radiated fields, so an uncoupled model no longer describes the hardware and may activate an unsuitable set of ports, distorting the synthesized pattern. This paper develops a mutual-coupling-aware framework that converts the desired beam amplitude into a finite-aperture-compatible complex target and models the complete antenna lattice as a coupled multiport network, selecting the active ports and their source voltages through the coupled voltage-to-field response. Inactive candidate ports remain part of the network and carry induced currents, and every compared design is evaluated through the same electromagnetic model under the same source-voltage budget. Numerical results show that the mutual-coupling-aware design improves both the average mainlobe signal-to-noise ratio (SNR) and the peak sidelobe level (PSLL) over coupling-unaware selection and a fixed array, demonstrating that mutual coupling should be exploited in the design itself rather than compensated only in the final evaluation.

0.38

Finite-Aperture Modeling of Pattern-Reconfigurable Antennas for Multiuser Beamforming

eess.SP ·2026-10-07 ·Kangjian Chen, Han Qing Yang, Hang Wong
similarity 0.59
Abstract · 14 pages, 11 figures; submitted to IEEE for possible publication

This paper establishes a finite-aperture model for pattern-reconfigurable antennas (PRAs) and exploits its aperture-constrained Fourier representation to develop an efficient multiuser beamforming framework. First, we develop an ideal model by representing the complex radiation pattern using a Fourier series. By applying the Jacobi-Anger expansion, we relate the antenna aperture to the effective Fourier order and derive aperture-dependent power bounds for individual Fourier coefficients. Second, we employ a practical multiport network model and design three representative reconfigurable pixel antennas to verify the predicted effective Fourier orders and per-order power constraints. We then formulate weighted sum-rate maximization for multiuser downlink transmission under both models. Using bounded Fourier coefficients as auxiliary variables, we develop a coefficient-bound penalty-based weighted minimum mean-square error algorithm that separates continuous beamforming from discrete switch-state optimization. We further propose a one-bit neighborhood search that exploits the Sherman-Morrison identity to accelerate the discrete optimization. Simulation results validate the physical relevance of the ideal model and demonstrate multiuser sum-rate gains and reduced optimization runtime for densely switched antennas. The proposed model provides a physically grounded basis for PRA-enabled communication analysis and design, while the framework accommodates different beamforming objectives and PRA implementations.

0.32

Harnessing Mutual Coupling in Cell-Free mMIMO

cs.IT eess.SP ·2026-11-02 ·Erind Tufa, Antonio A. D'Amico, Luca Sanguinetti
published similarity 0.58
Abstract

This letter investigates a cell-free massive MIMO system with $L$ access points (APs), each employing a small fixed-form-factor, uniform linear array of $N$ potentially closely spaced antennas. Utilizing multiport communication theory, we analyze the impact of mutual coupling on uplink and downlink spectral efficiency (SE) under various impedance-matching strategies. We compare two deployment regimes: ($i$) increasing $N$ while $L$ is kept fixed, and ($ii$) increasing $N$ while fixing the total antenna count $M = NL$. Numerical results show that, with a full matching network, mutual coupling itself becomes beneficial when an AP serves several user equipments, which is the typical operating regime of user-centric cell-free networks. Furthermore, with full matching, antenna densification can enhance SE or allow for a reduction in the number of APs without performance loss. Since full matching networks remain of manageable size in the small arrays of distributed APs, unlike in large centralized arrays, cell-free networks offer a natural setting for exploiting mutual coupling.

0.36