CS Paper Radar

Beam Squint and Aperture--Bandwidth Limitations in Wideband RIS-Assisted THz Links

Waqas Khalid, Chiew Foong Kwong, David Chieng, Qianyu Liu

cs.IT cs.NI ·submitted 2026-09-12 16:43 UTC · v1
published

Abstract

This paper analyzes the ergodic rate of a wideband reconfigurable intelligent surface (RIS)-assisted terahertz link under beam squint and finite-resolution phase control. Independent Rayleigh fading on the two RIS-assisted hops produces double-Rayleigh cascaded amplitudes. Exact second- and fourth-order channel moments are derived by incorporating the frequency-dependent array response and phase-quantization errors. Moment matching then provides a Gamma approximation for the received power on each subcarrier and a tractable closed-form approximation for the wideband ergodic rate. A first-null bandwidth approximation characterizes the aperture--bandwidth limitation of frequency-flat RIS control. Monte Carlo simulations validate the analytical framework.

Comment
Accepted for 4th International Conference on Internet of Things and Cloud Computing Technology (IoTCCT 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.65
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.59
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

Realistic modeling of Photonic Terahertz Communication based on a real-world 30 km 30 Gbps experimental demonstration

eess.SP ·2026-09-26 ·Mingxu Wang, Jianjun Yu, Xianming Zhao, Jiali Chen, Ye Zhou +7 more
publishedbenchmark similarity 0.57
Abstract · 15 pages, 10 figures

Experimental studies have demonstrated that THz links can support multi-kilometer, gigabit-per-second wireless transmission. However, few studies have effectively validated channel models through high-capacity, long-distance experiments. In this work, we experimentally demonstrate a 30 km ultra-long-haul photonic THz wireless communication system. 16 Gbaud quadrature phase shift keying (QPSK) signals are transmitted and tested, achieving a maximum data rate of 30 Gbps. For the first time, we validate two widely used THz channel models using a fully implemented 30 km experimental setup, providing a systematic and thorough analysis that integrates theoretical modeling with experimental results. We also perform an analysis of power consumption in photonic THz communication systems and provide a detailed comparison between simulated and experimental power consumption results. Finally, a detailed performance comparison between the simulation and experimental results, including signal-to-noise ratio (SNR), bit error rate (BER) and data rate, are provided. Our work provides essential insights for the design and energy-efficient deployment of future high-capacity THz networks, establishing a benchmark for subsequent research in channel modeling, experimental verification, and system-level energy efficiency.

0.34

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.57
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

A Frequency-Space Terahertz Transceiver Chip for Multi-Agent Communications and Spatial Awareness

eess.SY physics.app-ph ·2026-08-12 ·Xiaoyue Xia, Zhicheng Lin, Hao Guo, Siran Wang, Jingyuan Zhang +5 more
similarity 0.55
Abstract

Future indoor embodied-intelligence systems require scalable hardware platforms that support both high-capacity multi-agent connectivity and mutual spatial awareness. The terahertz (THz) spectrum offers abundant bandwidth and inherent spatial selectivity for integrated sensing and communication (ISAC); however, conventional phased arrays and programmable metasurfaces rely on dense beamforming networks, element-level control, or external THz illumination, making scalable multibeam operation challenging. Here, we report a fully integrated 208-258GHz 65-nm CMOS THz transceiver chip that monolithically integrates broadband front ends with heterogeneous leaky-wave metasurface (HLM) apertures within a 1.5mm by 4.9mm area. The HLM generates strongly dispersive leaky modes, enabling 75 degree frequency-controlled beam scanning with only four meta-atoms. Co-design of frequency-domain and spatial-domain mixing achieves spectrally clean frequency-to-space mapping for spatial-frequency division multiple access (SFDMA) communication. The THz chip demonstrates multi-agent simultaneous transmission and reception, two-dimensional localization, and sensing-enhanced communication, providing a scalable hardware platform for future THz embodied-intelligence networks.

0.34

Wideband Terahertz Pinching-Antenna Systems (PASS): Bandwidth Limits, Ergodic Rate, and Placement Optimization

eess.SP ·2026-11-16 ·Almutasem Bellah Enad, Chintha Tellambura, Zhiguo Ding
similarity 0.54
Abstract

Terahertz (THz) bands offer the vast bandwidth that sixth-generation (6G) networks demand, but their severe path loss makes bringing the radiator close to the user decisive. Pinching-antenna systems (PASS) do exactly this, turning path loss into a programmable parameter by sliding radiating points along a dielectric waveguide, which makes THz their native regime. That regime, however, is inherently wideband and the waveguide is dispersive, whereas every existing PASS analysis is single-frequency and assumes a non-dispersive guide. This paper develops the first wideband, dispersion-aware theory of PASS and uncovers a limitation intrinsic to the pinching mechanism. Because co-phasing by physical position equalizes path length only modulo a wavelength, a pinching array is inherently beam-squint limited, and we show its frequency response is a Dirichlet kernel with a closed-form coherence bandwidth and an irreducible dispersion floor that even true-time-delay (TTD) correction cannot remove. A single unifying law governs the behavior, in which array gain trades against both coherence bandwidth and spatial robustness through one invariant that TTD correction breaks, reaching the floor with far fewer delay elements than a conventional array. We further characterize the wideband ergodic rate under random user locations, show that molecular absorption acts as a deterministic taper that multiplies the squint, and derive a simple rule for the rate-optimal number of pinches. Finally, by exploiting the integer structure of co-phasing, we recast the non-convex placement problem as a mixed-integer program that can be solved exactly in polynomial time. Together, these results move PASS from the narrowband, dispersion-blind setting to the wideband, dispersive regime that THz operation actually requires.

0.25

Discrete Phase-Shift Optimization of Reconfigurable Intelligent Surfaces using Uniform Reference Directions

cs.PF cs.ITeess.SY ·2026-10-17 ·Pavithra P., Manoj Kumar Panda, Chandramani Singh
similarity 0.53
Abstract

Reconfigurable Intelligent Surfaces (RISs) enable programmable control of the wireless propagation environment through adjustable reflecting elements. A fundamental challenge in RIS-assisted communications is the optimization of discrete phase shifts to maximize the received signal power. While recently developed algorithms can obtain optimal solutions with linear complexity, their computational cost may still be excessive in applications requiring large-scale simulations, real-time adaptation, or repeated optimization over numerous channel realizations. This paper proposes a low-complexity discrete phase-shift optimization algorithm based on multiple reference directions within the feasible optimality sector. By evaluating candidate phase configurations generated from uniformly distributed reference directions, the proposed method systematically improves upon existing approximation approaches that rely on a fixed set of reference directions. The number of reference directions serves as a design parameter that enables a controllable trade-off between computational complexity and optimality. Extensive simulations demonstrate that the proposed algorithm achieves substantial computational speedups while maintaining a small optimality gap relative to the optimal solution. The results further show that increasing the number of reference directions progressively reduces the optimality gap, providing flexible operating points that can be tailored to application-specific complexity and performance requirements.

0.22

Physically Consistent Modeling of Dispersive Time-Modulated Reconfigurable Intelligent Surfaces for Wideband OFDM

eess.SP eess.SY ·2026-09-16 ·Ivan Iudice, Donatella Darsena, Giacinto Gelli, Vincenzo Galdi
similarity 0.53
Abstract · 13 pages, 6 figures, 2 tables

The elements of a reconfigurable intelligent surface (RIS) are commonly modeled either as frequency-selective time-invariant reflectors or as instantaneous time-varying reflection coefficients. In practice, however, time-modulated metasurfaces exhibit both frequency selectivity and periodic time variation. We develop a physically consistent linear periodically time-varying (LPTV) model that jointly captures these effects and characterizes their impact on wideband orthogonal frequency-division multiplexing (OFDM) communications. From a canonical equivalent circuit of a generic RIS element, we derive a single-resonance model whose physically meaningful parameters determine both the frequency-selective reflection coefficient and the effective impulse-response duration, i.e., the finite memory of the element. The periodically switched dispersive responses are then represented through harmonic transfer functions, leading to a closed-form per-subcarrier OFDM input-output relation. The resulting coupling is generally non-diagonal: each received subcarrier collects contributions from multiple transmitted subcarriers through the RIS harmonics, each weighted by the element response at the corresponding absolute input frequency. We further derive a generalized cyclic-prefix (CP) condition requiring the guard interval to accommodate both the propagation-channel delay spread and the RIS memory. Under this condition, intersymbol interference and out-of-grid spectral leakage are suppressed, while deterministic on-grid harmonic coupling remains. Full-wave simulations of an OpenRIS unit cell designed for a 5G NR channel validate the proposed resonant model and reveal appreciable in-band dispersion despite nearly ideal binary phase switching. Simulations over 3GPP tapped-delay-line (TDL) channels confirm the generalized CP condition and show its relevance for high-quality-factor RIS elements.

0.27