CS Paper Radar

Physically Consistent Modeling of Dispersive Time-Modulated Reconfigurable Intelligent Surfaces for Wideband OFDM

Ivan Iudice, Donatella Darsena, Giacinto Gelli, Vincenzo Galdi

eess.SP eess.SY ·submitted 2026-09-16 09:17 UTC · v1

Abstract

The elements of a reconfigurable intelligent surface (RIS) are commonly modeled either as frequency-selective time-invariant reflectors or as instantaneous time-varying reflection coefficients. In practice, however, time-modulated metasurfaces exhibit both frequency selectivity and periodic time variation. We develop a physically consistent linear periodically time-varying (LPTV) model that jointly captures these effects and characterizes their impact on wideband orthogonal frequency-division multiplexing (OFDM) communications. From a canonical equivalent circuit of a generic RIS element, we derive a single-resonance model whose physically meaningful parameters determine both the frequency-selective reflection coefficient and the effective impulse-response duration, i.e., the finite memory of the element. The periodically switched dispersive responses are then represented through harmonic transfer functions, leading to a closed-form per-subcarrier OFDM input-output relation. The resulting coupling is generally non-diagonal: each received subcarrier collects contributions from multiple transmitted subcarriers through the RIS harmonics, each weighted by the element response at the corresponding absolute input frequency. We further derive a generalized cyclic-prefix (CP) condition requiring the guard interval to accommodate both the propagation-channel delay spread and the RIS memory. Under this condition, intersymbol interference and out-of-grid spectral leakage are suppressed, while deterministic on-grid harmonic coupling remains. Full-wave simulations of an OpenRIS unit cell designed for a 5G NR channel validate the proposed resonant model and reveal appreciable in-band dispersion despite nearly ideal binary phase switching. Simulations over 3GPP tapped-delay-line (TDL) channels confirm the generalized CP condition and show its relevance for high-quality-factor RIS elements.

Comment
13 pages, 6 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.57
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

Beam Squint and Aperture--Bandwidth Limitations in Wideband RIS-Assisted THz Links

cs.IT cs.NI ·2026-09-12 ·Waqas Khalid, Chiew Foong Kwong, David Chieng, Qianyu Liu
published similarity 0.53
Abstract · Accepted for 4th International Conference on Internet of Things and Cloud Computing Technology (IoTCCT 2026)

This paper analyzes the ergodic rate of a wideband reconfigurable intelligent surface (RIS)-assisted terahertz link under beam squint and finite-resolution phase control. Independent Rayleigh fading on the two RIS-assisted hops produces double-Rayleigh cascaded amplitudes. Exact second- and fourth-order channel moments are derived by incorporating the frequency-dependent array response and phase-quantization errors. Moment matching then provides a Gamma approximation for the received power on each subcarrier and a tractable closed-form approximation for the wideband ergodic rate. A first-null bandwidth approximation characterizes the aperture--bandwidth limitation of frequency-flat RIS control. Monte Carlo simulations validate the analytical framework.

0.31

A Fully Wave-Domain Wideband MU MIMO OFDM Transmitter via Stacked Intelligent Metasurfaces

eess.SP cs.AR ·2026-09-09 ·Zheao Li, Jiancheng An, Chau Yuen
similarity 0.52
Abstract

This paper proposes an advanced realization principle for wideband multiuser multiple-input multiple-output orthogonal frequency-division multiplexing (MU-MIMO OFDM) transmitters, where the conventional transmitter-side baseband chain is physically synthesized in the wave domain. For design and optimization purposes, this fully wave-domain wideband MU-MIMO OFDM transmitter implemented by a cascaded SIM structure is functionally partitioned into two cascaded SIM blocks. The first block, denoted as SIM_1, integrates symbol loading and channel-adaptive MU-MIMO precoding updated at the channel-coherence timescale, mapping the user streams to a virtual port-subcarrier representation. The second block, denoted as SIM_2, acts as an offline-configured sampling-rate modulator that materializes the inverse discrete Fourier transform (IDFT) and cyclic prefix (CP) insertion directly in the wave domain. This baseband-free architecture establishes a virtual-to-physical transition from information bits to radiated CP-extended OFDM waveforms. To account for practical nonidealities, SIM_2 is optimized to fit the ideal multi-port CP-OFDM operator, and its residual response is mapped into an effective coupling matrix. Then, SIM_1 is optimized in a communication-oriented manner by jointly adapting discrete phase shifts and stream-subcarrier power loading to maximize the sum spectral efficiency. Results demonstrate the convergence, architecture trade-off, wave-domain OFDM materialization accuracy, and competitive performance of the proposed baseband-free transmitter.

0.44

Goal-Oriented Wave Computing for Direction-of-Arrival Estimation

eess.SP physics.app-ph ·2026-10-05 ·Mert Kalfa
benchmark similarity 0.51
Abstract · 9 pages, 2 figures, 4 tables

Programmable metasurfaces---arrays of elements whose electromagnetic response can be tuned electronically---can process signals as a wave propagates through or reflects off them, a paradigm known as wave-domain analog computing. The design strategy is typically indirect: the surface is fitted to a prescribed linear operator, such as a discrete Fourier transform, and the result is read from output power measurements. Using direction-of-arrival (DoA) estimation as a canonical benchmark, we study what this indirection costs across analog computing topologies, namely reflective reconfigurable intelligent surfaces (RIS), beyond-diagonal RIS (BD-RIS), and stacked intelligent metasurfaces (SIM). We first derive Cramér--Rao bounds for the complete physical estimation chain, including one that accounts for output detectors measuring only intensity. We then formulate a goal-oriented alternative where the surfaces are trained directly through the deployed readout, with no operator target. We observe that goal-oriented training lets sparsely connected or shallower surfaces reach the task performance of their more complex operator-fitted counterparts---despite nearly identical Fisher information---and that the advantage persists under coarsely quantized (1--3 bit) control. From 16 to 64 elements, the depth saving persists, while the connectivity a beyond-diagonal RIS needs grows with the aperture. Under tuner and per-layer loss, the goal-oriented designs keep their advantage.

0.25

SIM-Enabled Wave-Domain Processing in MIMO-OFDM Receivers: Architecture, Modeling, and Validation

eess.SP ·2026-11-04 ·Zheao Li, Jiancheng An, Chau Yuen
similarity 0.51
Abstract

This paper develops a wave-domain linear receiver for wideband MIMO-OFDM, where the main high-dimensional linear processing conventionally performed after sampling is physically shifted to propagation through stacked intelligent metasurfaces (SIMs). The proposed receiver transforms receive-port waveforms into OFDM-domain symbols through three cascaded SIM-enabled functional sections. The first section, SIM_1, performs channel-memory processing and channel shortening in an energy-concentration sense, suppressing the out-of-cyclic-prefix (CP) effective tail before OFDM analysis. SIM_2 realizes CP removal and discrete Fourier transform (DFT) analysis as cyclic-windowed OFDM matched filtering by exploiting useful-window memory and analytical Fourier phase coding. SIM_3 implements residual virtual-subcarrier MIMO linear detection, completing the wave-domain linear receive chain up to symbol slicing. Synchronization, control, slicing, and decoding remain digital, while the dominant linear receive operations are moved to the wave domain. A staged configuration framework is developed: the numerology-dependent OFDM analyzer is compiled offline, whereas the channel-dependent memory processor and detector are configured over the coherence time using architecture-aware learning-assisted control. Numerical results validate both functional replacement and link performance, confirming nearly lossless replacement under CP-sufficient MIMO-OFDM conditions, with robustness to residual timing offsets and effective channel-delay-profile perturbations. Substantial gains under CP-insufficient channels are also demonstrated by suppressing out-of-CP leakage before OFDM analysis.

0.07

System-Level Gains of Dual-Band RIS: From Wireless Communication to SWIPT

eess.SP ·2026-10-01 ·Aritra Basu, Zina Mohamed, Sonia Aïssa
top venue similarity 0.51
Abstract · This work has been accepted for publication in IEEE Transactions on Communications. 2026 IEEE. Personal use of this material is permitted. P…

This paper introduces the integration of dual-band reconfigurable intelligent surfaces (DBRIS) in wireless system design, and investigates the ensuing performance gains in different application scenarios. This type of metasurfaces offers a compelling technology due to their reduced material usage, compact design, and multi-functional operation across multiple frequency bands compared to single-band RISs. Two representative use cases are considered to assess the achievable performance gains with the said integration, namely, DBRIS-assisted wireless communication, and DBRIS-assisted simultaneous wireless information and power transfer (SWIPT). For the first design, where the DBRIS is deployed as a relay, we focus on the energy efficiency (EE) maximization of the communication system. An alternating manifold method is proposed for the joint optimization of the source transmit power and the DBRIS phase shifting. For the second design, we investigate a DBRIS-assisted SWIPT system using a novel power splitting approach. An EE metric is defined, and an alternating optimization algorithm is developed to maximize it. Numerical results validate the advantages of the proposed design architectures as well as the proposed optimization framework. In particular, we highlight the energy efficiency gains enabled by the DBRIS as compared to operations with conventional single-frequency surfaces, in both application scenarios.

0.40

Properties of Array Factor of Reconfigurable Intelligent Surfaces for Radio Communications

eess.SP cs.IT ·2026-10-12 ·Symeon Vaidanis, Athanasios D. Panagopoulos
published similarity 0.50
Abstract · This work has been accepted for publication in 2024 IEEE INC-USNC-URSI Radio Science Meeting (Joint with AP-S Symposium)

This paper delves into the intricate aspects of Reconfigurable Intelligent Surfaces (RIS) in the antenna design. It investigates the properties of the array factor of RIS, highlighting the significance of phase shifts in establishing of the reflect path. Additionally, the paper investigates spatial positions requiring identical phase shifts, nullification of the array factor, the count of total maxima, second maximum determination (amplitude of the second lobe), and the calculation of the 3dB bandwidth. They are very useful for RIS-assisted radio communication systems.

0.40

Optimization of Joint Beamforming in RIS-aided Multi-carrier and Multi-user MIMO Systems

cs.NI ·2026-11-04 ·Nuwan Balasuriya, Atefeh Termehchi, Ekram Hossain
similarity 0.49
Abstract

Reconfigurable intelligent surface (RIS)-aided multiple-input multiple-output (MIMO) communication is a promising enabler for beyond-fifth-generation wireless networks. However, RIS phase shifters typically rely on a tuning element (for example a variable-length stub), which can be optimally configured for only one carrier frequency at a time. This constraint complicates RIS deployment in multi-carrier systems and often necessitates additional measures, such as using multiple RIS panels or partitioning RIS elements across carriers. In this work, we propose a novel scheme in which all RIS elements simultaneously serve multiple carriers, delivering improved performance over existing approaches. Our method leverages the multiple reflections captured by physically consistent RIS models to realize the desired phase shifts for all carriers using a single stub length setting. We further develop a joint active and passive beamforming optimization framework tailored to multi-carrier, physically consistent RIS-aided systems. Simulation results confirm the effectiveness of the proposed

0.23