CS Paper Radar

Lattice Boltzmann Method for Compressible Navier-Stokes-Fourier Equations

Fedor Bukreev, Adrian Kummerländer, Mathias J. Krause

cs.MS physics.flu-dyn ·submitted 2026-08-13 16:24 UTC · v1

Abstract

A lattice Boltzmann scheme for the three-dimensional compressible Navier--Stokes--Fourier equations, derived automatically from the declared system by a symbolic compiler, is validated against exact solutions and published reference data. The declared system carries the viscous stress and the heat flux as transported state, and is discretized on a D3Q7 lattice in single precision. Against the exact Sod and Becker solutions the captured shock thickness converges at first order. On the supersonic Taylor-Green vortex at $M_0 = 1.25$ the scheme at $512^3$ matches the reference dilatational dissipation more closely than seven compared solvers, by thirty percent over the next best. Every operator in this solver, the generated collision and constitutive closure and the added shock sensor alike, reads only the cell it acts on, and data reaches a neighbor only by streaming along the lattice characteristics.

Closest papers

Nearest neighbours by meaning across the whole index.

A Gradient-Reconstruction Lattice Boltzmann Method for Compressible Navier--Stokes--Fourier Equations

cs.MS physics.comp-ph ·2026-09-14 ·Adrian Kummerländer, Fedor Bukreev, Mathias J. Krause
similarity 0.82
Abstract

Reaching compressible flow has usually forced lattice Boltzmann methods to abandon the compact stencil or the strict locality that make them efficient. We give up neither, solving the compressible Navier--Stokes--Fourier equations with a scheme that transports only the conserved mass, momentum and energy. The viscous stress and heat flux depend on gradients of the velocity and temperature. To capture them, existing compressible schemes go beyond a single lattice of the conserved fields. They enlarge the velocity set, carry the stress and heat flux as extra transported fields, place the energy on a separate grid, or give up exact streaming for an off-lattice advection. We instead recover the gradients from the non-equilibrium part of the distributions already present, inside the collision. No field beyond the conserved state is transported, no neighbour is read, streaming stays exact, and every computation runs in single precision. The method carries five fields where a transported-flux scheme carries fourteen, at a fraction of the memory and $4.9$ times the throughput. Verified against the exact Sod and Becker shock solutions and a supersonic Taylor--Green vortex, it tracks the direct-numerical-simulation reference on the kinetic energy and stays within the reference-solver spread on both dissipation rates.

0.16

The Partially Saturated Cells Method for Complex Moving Geometries in Turbulent Flow Conditions

cs.CE ·2026-11-18 ·Philipp Suffa, Harald Koestler, Ulrich Ruede
similarity 0.55
Abstract · 18 pages, 24 figures

We present four application cases to test and validate fluid-structure-interaction models based on the Lattice Boltzmann and the Partially Saturated Cells method (PSM) for turbulent flow conditions. For a flow around a stationary sphere we compare the PSM with direct mapping boundary conditions and achieve good agreement to reference data for Reynolds numbers up to one million. In particular, the model predicts the drag crisis for this case with good accuracy. For a three dimensional airfoil simulation at a Reynolds number of 150000, the PSM predicts the stall angle for a NACA0018 profile with excellent accuracy. For a geometry-resolved stirred tank simulation at a Reynolds number of 29000 the PSM produces the time averaged velocity profiles around the impeller with excellent fidelity. Finally, a wind turbine geometry is resolved with the PSM for a tip Reynolds number of 40000, where thrust and mean velocity in the turbine wake shows excellent agreement with reference data from literature.

0.32

CompFlowLab: A Python code to develop and prototype new data-driven models for challenging compressible flow problems with shocks and chemical reactions

cs.CE ·2026-09-26 ·Ali Mohaghegh, Cheng Huang
code/data similarity 0.55
Abstract

CompFlowLab is an open-source Python environment that is capable of modeling different classes of compressible flow problems (including shocks, flames, and detonation waves) using a one-dimensional compressible Navier-Stokes solver with multi-species transport and chemical-reaction models. It is designed specifically for the data-driven modeling community as a lightweight, accessible prototyping platform to test, develop, and evaluate new modeling methods on numerically and physically challenging compressible flow problems, especially those featuring shocks and chemical reactions. Specifically, CompFlowLab aims at (1) providing computationally efficient calculations on advection-dominanted problems that are well-recognized to be difficult for conventional data-driven modeling techniques, such as shocks, flames, and detonation waves, and more importantly (2) enabling rapid testing and prototyping of new data-driven models. The code serves three primary purposes: (1) generating high-fidelity full order model data for training of data-driven modeling, (2) providing a modular platform for implementing and testing novel data-driven algorithms (e.g., machine learning methods and reduced-order modeling techniques) on challenging physics, and (3) offering a standalone Computational Fluid Dynamics (CFD) solver with validated test cases that can also support numerical method development in the broader CFD community. By unifying these capabilities in a clean, extensible Python codebase, CompFlowLab lowers barriers to innovation at the intersection of model reduction and complex fluid dynamics.

0.64

Gradient Reconstruction in Lattice Boltzmann Methods for Systems of Conservation Laws

cs.MS physics.flu-dyn ·2026-09-05 ·Adrian Kummerländer, Fedor Bukreev, Mathias J. Krause
similarity 0.54
Abstract

The automatic derivation turns a declared system of conservation laws into a lattice Boltzmann scheme, giving each conserved physical quantity a set of q populations whose linear equilibrium embeds the physical flux in their first moment. When the flux depends on gradients of the conserved state, those gradients are supplied by tracking them as additional transported fields. Since lattice Boltzmann is commonly memory-bound, these additional degrees of freedom reduce the achievable throughput. To reclaim it, we reconstruct the gradients from the moment structure of the equilibrium instead of transporting them. To leading order, the first moment of a conserved quantity's non-equilibrium part carries its gradient. Because the reconstructed flux enters its own equilibrium reference, that moment is the image of the gradient under a linear operator built from the diffusive-flux Jacobian. The reconstruction is that operator's algebraic inverse, generic across gradient-form constitutive closures and generated automatically from each declared flux. The resulting scheme carries the conserved quantities alone, reconstructing the required gradients from the populations and forming the fluxes locally. It converges at second order in double precision across advection-diffusion-reaction, Allen-Cahn, Navier-Stokes, resistive magnetohydrodynamics and homogenized compressible Navier-Stokes-Fourier systems, matching the accuracy of gradient tracking at equal resolution. On an NVIDIA RTX A5000 it is up to 3.7 times faster in single precision, the memory-bound kernels reaching up to 97% of peak memory bandwidth.

0.46

Mixed-precision GPU algorithms for efficient turbulent flow simulations with Raviart-Thomas finite elements

cs.MS physics.flu-dynmath.NA ·2026-09-17 ·Ivan Prusak, Enes Mustafa Soydan, Ivan Pribec, Martin Kronbichler
similarity 0.53
Abstract · 19 pages, 9 figures, 5 tables

We propose GPU algorithms for high-fidelity simulation of incompressible turbulent flows. Discretization in space is performed with H(div)-conforming high-order Raviart-Thomas finite elements for the velocity and an $L^2$-conforming discontinuous Galerkin approximation for the pressure. In time, a consistent splitting scheme based on higher-order BDF time stepping is used, with convection treated explicitly. In this scheme, a pressure Poisson equation and a symmetric reaction-diffusion-type equation for the velocity need to be solved in each time step. We develop a solution framework with fast matrix-free operator evaluation for all ingredients, combined with multigrid solvers for the Poisson problem, and propose a robust mixed-precision algorithmic framework. A key to mixed-precision efficiency is a least-squares projection to generate accurate initial guesses for the iterative linear solvers, enabling us to work with relative residual tolerances of $10^{-3}$. In this regime, running the solvers entirely in single precision leads to almost no change in overall iteration counts and maintains the crucial turbulence statistics, while showing up to $1.7\times$ speedup over pure double-precision simulations.

0.53

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.53
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

Computer-assisted global regularity across nonlinear families of three-dimensional periodic Navier-Stokes flows

cs.LG physics.flu-dyn ·2026-09-14 ·Jose Luis Lima de Jesus Silva
unusual similarity 0.50
Abstract · 75 pages, 14 figures

Numerical simulations reveal how vortices stretch and transfer energy, but establishing smooth evolution requires bounds that remain valid beyond the simulated resolution. Here I develop a computer-assisted framework that establishes global regularity for continuous families of three-dimensional periodic Navier-Stokes flows. Its central construction combines finite reference trajectories with a common error bound that covers an interval of centre fields and infinitely many smooth perturbation modes. The method retains the complete nonlinear residual before spectral truncation and controls the evolution until viscous decay guarantees regularity for all subsequent times. Applications to cyclic-shear, Arnold-Beltrami-Childress and three-component Taylor-Green fields yield explicit perturbation radii and include initial conditions outside the direct Fourier-Wiener smallness criterion. A parameter-uniform extension covers a connected family of non-Beltrami Taylor-Green centres without repeating the proof for individual parameter values. An ensemble of 4,096 configurations, supplemented by 1,600 refinement trajectories and public turbulence data, connects the mathematical observables to spectral transfer and vortex geometry. Matched neural-operator experiments show that physics-informed training improves physical prediction, while also revealing that these gains do not necessarily improve the discovery of proof-limiting initial conditions. Together, these results provide a reusable method for establishing regularity across prescribed flow families and a quantitative setting for evaluating how learned predictions can assist rigorous computation.

0.39

AeroZoo: A Benchmark of Well-Posed Flow Problems for Foundation Models of Aerodynamics

cs.LG cs.CEphysics.flu-dyn ·2026-11-12 ·Peter Sharpe, Carmelo Gonzales, Corey Adams, Mehdi Ataei, Sanjay Choudhry
benchmarkcode/data similarity 0.49
Abstract · 35 pages, 13 figures, 23 tables. Lead authors: Peter Sharpe and Carmelo Gonzales. Companion paper to "ISLA: A Coordinate-Free, Measure-Weigh…

Neural surrogates for computational fluid dynamics (CFD) are trained and ranked on datasets that each vary one design family in one flow domain. Such datasets cannot test the least that an aerodynamic foundation model must do: predict CFD-quality incompressible flow in seconds for new shapes in new enclosures. On DrivAerML, larger models and longer training barely lower Transolver's error; doubling the training cases cuts it by about 12% up to 400 cases, exhausting the dataset. We introduce AeroZoo, a benchmark and training corpus of 3,815 time-mean solutions to the unsteady Reynolds-averaged Navier--Stokes (RANS) equations with a transition model, across seven geometry families, eight enclosure configurations and Reynolds numbers from $10^3$ to $10^8$. Each sample poses a well-posed PDE problem in the form a solver receives it: the boundary meshes grouped by condition type, the prescribed values and the fluid properties. The 2,816 samples with a stable time mean form the canonical benchmark: two tasks, engineering metrics and 22 frozen splits, disjoint in geometry, that hold out geometry families, enclosures, boundary-condition layouts and Reynolds ranges. On the random split, boundary-condition tokens cut GeoTransolver's median velocity error from 76.9% to 8.4% of the inlet speed in single-seed runs (uniform inlet flow: 11.0%). ISLA, a transformer for boundary-driven PDEs, reaches 5.3% over four seeds, about 4 times the change from a finer mesh. On the same test samples, a held-out geometry family barely changes ISLA's error relative to uniform flow, and a held-out enclosure or boundary-condition layout raises it 2.4 to 9.2 times. The data and the scoring code will be released.

0.42