CS Paper Radar

The Partially Saturated Cells Method for Complex Moving Geometries in Turbulent Flow Conditions

Philipp Suffa, Harald Koestler, Ulrich Ruede

cs.CE ·submitted 2026-11-18 10:56 UTC · v1

Abstract

We present four application cases to test and validate fluid-structure-interaction models based on the Lattice Boltzmann and the Partially Saturated Cells method (PSM) for turbulent flow conditions. For a flow around a stationary sphere we compare the PSM with direct mapping boundary conditions and achieve good agreement to reference data for Reynolds numbers up to one million. In particular, the model predicts the drag crisis for this case with good accuracy. For a three dimensional airfoil simulation at a Reynolds number of 150000, the PSM predicts the stall angle for a NACA0018 profile with excellent accuracy. For a geometry-resolved stirred tank simulation at a Reynolds number of 29000 the PSM produces the time averaged velocity profiles around the impeller with excellent fidelity. Finally, a wind turbine geometry is resolved with the PSM for a tip Reynolds number of 40000, where thrust and mean velocity in the turbine wake shows excellent agreement with reference data from literature.

Comment
18 pages, 24 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Efficient Projection-Based Reduced-Order Modeling for Computational Fluid Dynamics via Multifidelity Basis Construction

cs.CE ·2026-11-04 ·Ashok Viswanathan, Charbel Farhat
similarity 0.62
Abstract · 18 pages conference

Projection-based reduced-order models (PROMs) accelerate computational fluid dynamics simulations, but generating high-fidelity (HF) training snapshots remains expensive. We present a multifidelity methodology that reduces offline basis-construction costs by combining a small HF database with low-fidelity (LF) solutions. The method accommodates discrepancies in physical models and spatial discretizations. Parameter-matched HF and aligned LF snapshots define a correction basis. At new parameters, LF predictions are corrected by minimizing the HF residual over an affine trial space, with selective Reynolds-averaged Navier-Stokes (RANS) smoothing. Accepted snapshots enrich the training database and update the correction basis. The resulting basis is compatible with conventional projection methods, including least-squares Petrov-Galerkin projection. For steady flow over a NACA0012 airfoil, using fine-grid RANS and coarse-grid Euler models, four HF snapshots and 36 LF-derived snapshots reduce snapshot-generation cost by a factor of 7.8. At basis dimension 40, mean lift, drag, and lift-to-drag ratio errors are 1.1%, 3.6%, and 3.9%, and the mean relative skin-friction error is approximately 5%, compared with 0.18%, 2.9%, 2.8%, and 4% for an HF-only PROM. Errors are evaluated against fully converged HF solutions on a test set emphasizing shock-containing flows. Increasing the initial HF snapshot count raises cost without monotonically improving accuracy. Among the tested multifidelity configurations, ten initial HF snapshots give the lowest aerodynamic errors at dimension 40; increasing the count to twelve worsens all three. The results demonstrate reduced snapshot-generation costs while retaining compatibility with established PROM formulations.

0.32

AeroZoo: A Benchmark of Well-Posed Flow Problems for Foundation Models of Aerodynamics

cs.LG cs.CEphysics.flu-dyn ·2026-11-12 ·Peter Sharpe, Carmelo Gonzales, Corey Adams, Mehdi Ataei, Sanjay Choudhry
benchmarkcode/data similarity 0.58
Abstract · 35 pages, 13 figures, 23 tables. Lead authors: Peter Sharpe and Carmelo Gonzales. Companion paper to "ISLA: A Coordinate-Free, Measure-Weigh…

Neural surrogates for computational fluid dynamics (CFD) are trained and ranked on datasets that each vary one design family in one flow domain. Such datasets cannot test the least that an aerodynamic foundation model must do: predict CFD-quality incompressible flow in seconds for new shapes in new enclosures. On DrivAerML, larger models and longer training barely lower Transolver's error; doubling the training cases cuts it by about 12% up to 400 cases, exhausting the dataset. We introduce AeroZoo, a benchmark and training corpus of 3,815 time-mean solutions to the unsteady Reynolds-averaged Navier--Stokes (RANS) equations with a transition model, across seven geometry families, eight enclosure configurations and Reynolds numbers from $10^3$ to $10^8$. Each sample poses a well-posed PDE problem in the form a solver receives it: the boundary meshes grouped by condition type, the prescribed values and the fluid properties. The 2,816 samples with a stable time mean form the canonical benchmark: two tasks, engineering metrics and 22 frozen splits, disjoint in geometry, that hold out geometry families, enclosures, boundary-condition layouts and Reynolds ranges. On the random split, boundary-condition tokens cut GeoTransolver's median velocity error from 76.9% to 8.4% of the inlet speed in single-seed runs (uniform inlet flow: 11.0%). ISLA, a transformer for boundary-driven PDEs, reaches 5.3% over four seeds, about 4 times the change from a finer mesh. On the same test samples, a held-out geometry family barely changes ISLA's error relative to uniform flow, and a held-out enclosure or boundary-condition layout raises it 2.4 to 9.2 times. The data and the scoring code will be released.

0.42

A Gradient-Reconstruction Lattice Boltzmann Method for Compressible Navier--Stokes--Fourier Equations

cs.MS physics.comp-ph ·2026-09-14 ·Adrian Kummerländer, Fedor Bukreev, Mathias J. Krause
similarity 0.56
Abstract

Reaching compressible flow has usually forced lattice Boltzmann methods to abandon the compact stencil or the strict locality that make them efficient. We give up neither, solving the compressible Navier--Stokes--Fourier equations with a scheme that transports only the conserved mass, momentum and energy. The viscous stress and heat flux depend on gradients of the velocity and temperature. To capture them, existing compressible schemes go beyond a single lattice of the conserved fields. They enlarge the velocity set, carry the stress and heat flux as extra transported fields, place the energy on a separate grid, or give up exact streaming for an off-lattice advection. We instead recover the gradients from the non-equilibrium part of the distributions already present, inside the collision. No field beyond the conserved state is transported, no neighbour is read, streaming stays exact, and every computation runs in single precision. The method carries five fields where a transported-flux scheme carries fourteen, at a fraction of the memory and $4.9$ times the throughput. Verified against the exact Sod and Becker shock solutions and a supersonic Taylor--Green vortex, it tracks the direct-numerical-simulation reference on the kinetic energy and stays within the reference-solver spread on both dissipation rates.

0.16

Lattice Boltzmann Method for Compressible Navier-Stokes-Fourier Equations

cs.MS physics.flu-dyn ·2026-08-13 ·Fedor Bukreev, Adrian Kummerländer, Mathias J. Krause
similarity 0.55
Abstract

A lattice Boltzmann scheme for the three-dimensional compressible Navier--Stokes--Fourier equations, derived automatically from the declared system by a symbolic compiler, is validated against exact solutions and published reference data. The declared system carries the viscous stress and the heat flux as transported state, and is discretized on a D3Q7 lattice in single precision. Against the exact Sod and Becker solutions the captured shock thickness converges at first order. On the supersonic Taylor-Green vortex at $M_0 = 1.25$ the scheme at $512^3$ matches the reference dilatational dissipation more closely than seven compared solvers, by thirty percent over the next best. Every operator in this solver, the generated collision and constitutive closure and the added shock sensor alike, reads only the cell it acts on, and data reaches a neighbor only by streaming along the lattice characteristics.

0.39

ONE CYLinder: A Benchmark for Graph-Based Surrogate Modeling of Unsteady Bluff-Body Flows

cs.LG physics.flu-dyn ·2026-09-08 ·Théodore Michel, Antoine Campos, Alban Dujardin, Henry Areiza, Philippe Meliga +1 more
benchmark similarity 0.55
Abstract · pre-print

Graph-based surrogate models offer a promising route to accelerate computational fluid dynamics (CFD) simulations on unstructured meshes. However, their development is limited by the scarcity of benchmark datasets spanning multiple flow regimes and standardized protocols for long-horizon autoregressive prediction. We introduce ONECYL (ONE CYLinder), a new benchmark for unsteady flow past a circular cylinder across laminar, transitional, and high-Reynolds-number regimes. The benchmark comprises 450 high-fidelity Variational Multiscale finite-element simulations (270,000 flow snapshots) with randomized cylinder geometries, providing time-resolved velocity and pressure fields together with mesh connectivity, geometric descriptors, Reynolds numbers, and integrated aerodynamic quantities. Beyond the dataset, ONECYL establishes a unified evaluation framework combining full-field rollout errors, virtual probes, and drag and lift predictions to assess numerical accuracy and physical fidelity. To accompany the benchmark, we develop a Graph Transformer as a reference baseline predicting velocity and pressure fields autoregressively on unstructured meshes. Using ONECYL, we investigate geometric representations and physics-based regularization across the three Reynolds-number regimes. The results show that explicitly encoding the cylinder geometry through a level-set representation consistently improves long-horizon prediction accuracy and generalization to unseen geometries, while divergence-based regularization becomes increasingly beneficial as flow complexity increases. The ONECYL benchmark and its Graph Transformer baseline provide a reproducible framework for evaluating graph-based surrogate models and establish a foundation for future research on long-horizon prediction of unsteady bluff-body flows.

0.27

TurtLES: A Large-Scale Benchmark for Turbulent 3D Neural PDE Surrogates

cs.LG physics.flu-dyn ·2026-11-06 ·Jarno Platenburg, Armand Kassaï Koupaï, Paola Cinnella, Patrick Gallinari
benchmarkdataset similarity 0.54
Abstract

Machine-learning surrogates are increasingly used to accelerate computational fluid dynamics, yet progress is limited by the lack of benchmarks capturing realistic, time-dependent turbulent flows. We introduce TurtLES, a 14 TB dataset of 3D turbulent cylinder wakes in the shear-layer transition regime, computed via high-fidelity implicit large-eddy simulations. The dataset contains 400 trajectories of 400 time steps each, with 3-11 million points per frame, spanning variations in geometry, Reynolds number, and angle of attack. Unlike existing datasets, TurtLES combines (i) physically realistic turbulence with an active energy cascade driven by vortex stretching, (ii) dense irregular meshes, and (iii) long-horizon temporal dynamics. We benchmark state-of-the-art neural operators on autoregressive rollouts and identify key failure modes, including temporal instability, loss of small-scale energy, and challenges in learning on large irregular domains. TurtLES provides a new benchmark for evaluating surrogate models on 3D turbulent wakes at industrially relevant mesh resolution.

0.31

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.54
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

Airfoil2Vec: Spectral Geometry-Conditioned Neural Surrogate Models for Airfoil Aerodynamics and a Downforce-Generating CFD Dataset

cs.LG physics.flu-dyn ·2026-09-25 ·Haitz Sáez de Ocáriz Borde, Flavio Savarino, Andrei Cristian Popescu, Pietro Innocenzi, Pantelis Papageorgiou +1 more
datasetcode/data similarity 0.54
Abstract

We introduce a dataset of approximately 10,000 Reynolds-Averaged Navier-Stokes (RANS) simulations of steady, incompressible, two-dimensional subsonic flow around downforce-generating NACA 4-digit airfoils, targeting aerodynamic regimes relevant to automotive and motorsport applications (openly available on https://huggingface.co/datasets/ratiolabs/downforce-airfoils). Using this resource, we study geometry-conditioned neural surrogates for fast flow prediction, comparing neural fields with neural ODEs, MLPs with graph-based models, and several spectral geometry-conditioning methods. We further propose Airfoil2Vec, an airfoil-specific spectral geometry encoder that combines the joint contour spectrum with separate spectral representations of camber and thickness, for predicting continuous pressure and velocity fields. We evaluate generalization through angle-of-attack interpolation, interpolation and extrapolation to unseen NACA 4-digit geometries, and generalization to unseen non-NACA airfoils. The resulting surrogate accurately captures aerodynamic quantities and qualitative flow features while providing orders-of-magnitude speedups over conventional computational fluid dynamics.

0.21