CS Paper Radar

Efficient Projection-Based Reduced-Order Modeling for Computational Fluid Dynamics via Multifidelity Basis Construction

Ashok Viswanathan, Charbel Farhat

cs.CE ·submitted 2026-11-04 23:35 UTC · v1

Abstract

Projection-based reduced-order models (PROMs) accelerate computational fluid dynamics simulations, but generating high-fidelity (HF) training snapshots remains expensive. We present a multifidelity methodology that reduces offline basis-construction costs by combining a small HF database with low-fidelity (LF) solutions. The method accommodates discrepancies in physical models and spatial discretizations. Parameter-matched HF and aligned LF snapshots define a correction basis. At new parameters, LF predictions are corrected by minimizing the HF residual over an affine trial space, with selective Reynolds-averaged Navier-Stokes (RANS) smoothing. Accepted snapshots enrich the training database and update the correction basis. The resulting basis is compatible with conventional projection methods, including least-squares Petrov-Galerkin projection. For steady flow over a NACA0012 airfoil, using fine-grid RANS and coarse-grid Euler models, four HF snapshots and 36 LF-derived snapshots reduce snapshot-generation cost by a factor of 7.8. At basis dimension 40, mean lift, drag, and lift-to-drag ratio errors are 1.1%, 3.6%, and 3.9%, and the mean relative skin-friction error is approximately 5%, compared with 0.18%, 2.9%, 2.8%, and 4% for an HF-only PROM. Errors are evaluated against fully converged HF solutions on a test set emphasizing shock-containing flows. Increasing the initial HF snapshot count raises cost without monotonically improving accuracy. Among the tested multifidelity configurations, ten initial HF snapshots give the lowest aerodynamic errors at dimension 40; increasing the count to twelve worsens all three. The results demonstrate reduced snapshot-generation costs while retaining compatibility with established PROM formulations.

Comment
18 pages conference

Closest papers

Nearest neighbours by meaning across the whole index.

The Partially Saturated Cells Method for Complex Moving Geometries in Turbulent Flow Conditions

cs.CE ·2026-11-18 ·Philipp Suffa, Harald Koestler, Ulrich Ruede
similarity 0.62
Abstract · 18 pages, 24 figures

We present four application cases to test and validate fluid-structure-interaction models based on the Lattice Boltzmann and the Partially Saturated Cells method (PSM) for turbulent flow conditions. For a flow around a stationary sphere we compare the PSM with direct mapping boundary conditions and achieve good agreement to reference data for Reynolds numbers up to one million. In particular, the model predicts the drag crisis for this case with good accuracy. For a three dimensional airfoil simulation at a Reynolds number of 150000, the PSM predicts the stall angle for a NACA0018 profile with excellent accuracy. For a geometry-resolved stirred tank simulation at a Reynolds number of 29000 the PSM produces the time averaged velocity profiles around the impeller with excellent fidelity. Finally, a wind turbine geometry is resolved with the PSM for a tip Reynolds number of 40000, where thrust and mean velocity in the turbine wake shows excellent agreement with reference data from literature.

0.32

Multifidelity Operator Inference for Dynamical Systems

cs.CE stat.MLcs.LGmath.NA ·2026-11-12 ·Vignesh Sella, Anirban Chaudhuri, Karen Willcox
similarity 0.61
Abstract · 19 pages, AIAA SciTech Forum 2027 (Uncertainty Quantification Conference)

This paper presents a multifidelity (MF) formulation of Operator Inference (OpInf) for learning non-intrusive, physics-based reduced-order models (ROMs) of nonlinear dynamical systems. OpInf learns reduced operators from projections of snapshot data by solving a least squares regression problem. However, generating high-fidelity snapshots can be computationally expensive, limiting parameter coverage and the temporal extent of training trajectories for many aerospace applications, which can lead to inaccurate or unstable ROM predictions. This work proposes MF-OpInf, which combines limited high-fidelity snapshots with more plentiful low-fidelity snapshots through a control-variates-inspired MF least squares formulation to learn a single set of reduced operators across multiple trajectories. Low-fidelity trajectories provide additional parameter coverage and extend beyond the high-fidelity training time horizon. The low-fidelity snapshots are also used to construct an improved reduced basis through weighted proper orthogonal decomposition. We demonstrate MF-OpInf on a nonlinear reaction-diffusion problem with parametrized sinusoidal forcing and a two-dimensional incompressible flow past a cylinder with a parametrized inlet pulse. In these experiments, under an equal training simulation budget, MF-OpInf reduces the mean relative prediction error at unseen parameters by up to $87\%$ for the reaction-diffusion problem and $28\%$ for the cylinder flow problem over the test time regime, which extends beyond the high-fidelity training time horizon. These results demonstrate that MF-OpInf can improve temporal extrapolation and prediction at unseen parameters without increasing the training simulation budget.

0.15

Learnable composition for neural operators

cs.LG ·2026-09-02 ·Zituo Chen, Baiming Zhang, Sili Deng
similarity 0.61
Abstract

Neural operators are fast, differentiable surrogates for physical simulation, but their accuracy often degrades when domain geometry, size, or operating conditions differ from training. Supervised adaptation can recover accuracy, but even a small target set requires costly high-fidelity simulations. We therefore ask how pretraining and transfer can be designed together to reduce this deployment cost. LatentDDM first pretrains a neural operator to predict fields on small subdomains. For a new setting, it freezes this operator and trains only a lightweight module that composes the local predictions. We evaluate our method on two complementary problems: steady Darcy flow, where long-range pressure coupling must extend across increasingly large porous domains, and unsteady incompressible flow around a pitching airfoil, where rollout errors compound as target pitching frequencies exceed the training range. Compared with the capacity-matched models that process the full domain at once, LatentDDM's error is 36-56% lower on larger Darcy domains after adaptation with 16 target simulations. It also improves 20-step field rollouts in fast-pitching airfoil flow, both zero-shot and after few-shot calibration. These results identify the co-designed local pretraining and composition-level transfer as a promising design principle for physical foundation models.

0.28

AeroZoo: A Benchmark of Well-Posed Flow Problems for Foundation Models of Aerodynamics

cs.LG cs.CEphysics.flu-dyn ·2026-11-12 ·Peter Sharpe, Carmelo Gonzales, Corey Adams, Mehdi Ataei, Sanjay Choudhry
benchmarkcode/data similarity 0.61
Abstract · 35 pages, 13 figures, 23 tables. Lead authors: Peter Sharpe and Carmelo Gonzales. Companion paper to "ISLA: A Coordinate-Free, Measure-Weigh…

Neural surrogates for computational fluid dynamics (CFD) are trained and ranked on datasets that each vary one design family in one flow domain. Such datasets cannot test the least that an aerodynamic foundation model must do: predict CFD-quality incompressible flow in seconds for new shapes in new enclosures. On DrivAerML, larger models and longer training barely lower Transolver's error; doubling the training cases cuts it by about 12% up to 400 cases, exhausting the dataset. We introduce AeroZoo, a benchmark and training corpus of 3,815 time-mean solutions to the unsteady Reynolds-averaged Navier--Stokes (RANS) equations with a transition model, across seven geometry families, eight enclosure configurations and Reynolds numbers from $10^3$ to $10^8$. Each sample poses a well-posed PDE problem in the form a solver receives it: the boundary meshes grouped by condition type, the prescribed values and the fluid properties. The 2,816 samples with a stable time mean form the canonical benchmark: two tasks, engineering metrics and 22 frozen splits, disjoint in geometry, that hold out geometry families, enclosures, boundary-condition layouts and Reynolds ranges. On the random split, boundary-condition tokens cut GeoTransolver's median velocity error from 76.9% to 8.4% of the inlet speed in single-seed runs (uniform inlet flow: 11.0%). ISLA, a transformer for boundary-driven PDEs, reaches 5.3% over four seeds, about 4 times the change from a finer mesh. On the same test samples, a held-out geometry family barely changes ISLA's error relative to uniform flow, and a held-out enclosure or boundary-condition layout raises it 2.4 to 9.2 times. The data and the scoring code will be released.

0.29

The Snapping Phenomenon and Boundary Enforcement in Model Reduction: Mechanisms and Mitigation

cs.CE ·2026-10-15 ·Charbel Farhat, Yihong Zhu, Faisal As'ad, Tommaso Taddei
similarity 0.61
Abstract · 29 pages, 13 figures

Projection-based model order reduction mitigates the computational cost of high-fidelity parametric simulations but can suffer from the "snapping phenomenon", whereby a projection-based reduced-order model (PROM) rigidly latches onto a training snapshot, impairing parametric interpolation. Standard methods also struggle to enforce parameter-dependent boundary conditions without costly constraints or penalty schemes. This work proposes a tripartite taxonomy of snapping, distinguishing intrinsic, extrinsic, and numerical mechanisms. Focusing on intrinsic and numerical snapping, we introduce a unified framework based on a parameter-dependent shift vector. By embedding spatial transport into the state ansatz, the method enforces boundary conditions exactly, restores continuous parametric sensitivity, and eliminates snapshot latching in affine and regression-augmented PROMs without increasing online complexity. We establish the framework's mathematical foundations in the linear regime, showing how it overcomes test-space orthogonality blind spots. In nonlinear computational fluid dynamics, we identify the roles of boundary conditions, mesh grading, and discrete equation scaling in numerical snapping. We also show that formulation-toggling is an unreliable heuristic that can compromise near-field accuracy. Finally, we develop a field-theoretic realization using a spatially varying shift vector governed by a scaled Laplace equation. The approach is validated on structural and aerodynamic benchmarks, including viscous flow around a NACA airfoil and a three-dimensional NASA Common Research Model.

0.22

TurtLES: A Large-Scale Benchmark for Turbulent 3D Neural PDE Surrogates

cs.LG physics.flu-dyn ·2026-11-06 ·Jarno Platenburg, Armand Kassaï Koupaï, Paola Cinnella, Patrick Gallinari
benchmarkdataset similarity 0.60
Abstract

Machine-learning surrogates are increasingly used to accelerate computational fluid dynamics, yet progress is limited by the lack of benchmarks capturing realistic, time-dependent turbulent flows. We introduce TurtLES, a 14 TB dataset of 3D turbulent cylinder wakes in the shear-layer transition regime, computed via high-fidelity implicit large-eddy simulations. The dataset contains 400 trajectories of 400 time steps each, with 3-11 million points per frame, spanning variations in geometry, Reynolds number, and angle of attack. Unlike existing datasets, TurtLES combines (i) physically realistic turbulence with an active energy cascade driven by vortex stretching, (ii) dense irregular meshes, and (iii) long-horizon temporal dynamics. We benchmark state-of-the-art neural operators on autoregressive rollouts and identify key failure modes, including temporal instability, loss of small-scale energy, and challenges in learning on large irregular domains. TurtLES provides a new benchmark for evaluating surrogate models on 3D turbulent wakes at industrially relevant mesh resolution.

0.31

Mixed-precision GPU algorithms for efficient turbulent flow simulations with Raviart-Thomas finite elements

cs.MS physics.flu-dynmath.NA ·2026-09-17 ·Ivan Prusak, Enes Mustafa Soydan, Ivan Pribec, Martin Kronbichler
similarity 0.60
Abstract · 19 pages, 9 figures, 5 tables

We propose GPU algorithms for high-fidelity simulation of incompressible turbulent flows. Discretization in space is performed with H(div)-conforming high-order Raviart-Thomas finite elements for the velocity and an $L^2$-conforming discontinuous Galerkin approximation for the pressure. In time, a consistent splitting scheme based on higher-order BDF time stepping is used, with convection treated explicitly. In this scheme, a pressure Poisson equation and a symmetric reaction-diffusion-type equation for the velocity need to be solved in each time step. We develop a solution framework with fast matrix-free operator evaluation for all ingredients, combined with multigrid solvers for the Poisson problem, and propose a robust mixed-precision algorithmic framework. A key to mixed-precision efficiency is a least-squares projection to generate accurate initial guesses for the iterative linear solvers, enabling us to work with relative residual tolerances of $10^{-3}$. In this regime, running the solvers entirely in single precision leads to almost no change in overall iteration counts and maintains the crucial turbulence statistics, while showing up to $1.7\times$ speedup over pure double-precision simulations.

0.53

Solving and Learning Navier-Stokes Dynamics with the Neural Basis Method

cs.LG physics.flu-dynmath.NA ·2026-10-23 ·Yuhe Wang, Zhu Wang, Min Wang
similarity 0.60
Abstract · 23 pages, 6 figures

Physics-informed machine learning has become a major direction in predictive modeling of fluid dynamics, combining governing physics with learned representations. Yet prevailing formulations neither guarantee that small PDE-residual losses imply small solution errors nor scale effectively with increasing problem size. Here we present the neural basis method (NBM) as a new approach for Navier--Stokes dynamics. NBM is built on a ``representation-then-projection'' principle: fixed neural bases define the representation space, while projection of the governing equations determines the expansion coefficients. The same bases define common coordinates for the parametric solution manifold, recasting operator learning as a parameter-to-coefficient mapping and enabling scalability by removing explicit spatial dependence. For incompressible flow, NBM yields a velocity-only formulation whose residual provides an a posteriori velocity-error estimate, establishing a certified, data-free training objective for coefficient learning. Theoretical analysis and numerical experiments demonstrate the accuracy, efficiency, generalization, and scalability of NBM, with substantial improvements over baselines.

0.19