CS Paper Radar

FabDreamer: Exploring the Image-to-Physical Workflow Through AI-Assisted Layered Fabrication

Chenfeng Gao, Zeya Chen, Anjie Yang, Karan Ahuja, Danli Luo

cs.HC ·submitted 2026-08-13 18:03 UTC · v1
top venue

Abstract

Generative AI lets anyone create rich visual content in seconds, yet translating that content into a physically fabricable artifact still demands manual decomposition, occlusion repair, and structural verification that most tools leave entirely to the user. We present FabDreamer, an image-to-physical system that carries an image to fabrication-ready SVGs through three stages with deliberately staged AI initiative: (1) AI leads decomposition into depth-ordered layers, (2) assists on demand during creative editing with realtime 3D preview, and (3) advises on structural integrity before export. We instantiate this workflow for layered laser-cut art and evaluate it through three rounds including a formative analysis, an early prototype user evaluation (N=13), and a cross-domain practitioner study with specialists from 6 fabrication domains (N=6). Our findings show that physical awareness during design opens creative opportunities beyond error prevention, that practitioners appropriate the system's generic geometric operations for their own domains, and that the fabrication agent covers geometry-readable constraints while domain knowledge remains with the maker.

Comment
16 pages, 10 figures
Journal ref
Proceedings of the 39th Annual ACM Symposium on User Interface Software and Technology (UIST 2026)
DOI
10.1145/3830398.3830571

Closest papers

Nearest neighbours by meaning across the whole index.

InstructMesh: Selective Refinement of Generative 3D Models for Fabrication

cs.AI ·2026-08-28 ·Faraz Faruqi, Ahmed Katary, Demircan Tas, Theresa Hradilak, Ning Zhang +8 more
top venue similarity 0.69
Abstract

Recent advances in generative AI allow users to create 3D models from text or images. However, these models prioritize visual plausibility over geometric accuracy, often generating results with flaws that compromise their intended use post-fabrication. We present InstructMesh, an interactive post-generation refinement tool that enables selective repair of generative 3D models through region selection and targeted operations, such as opening or sealing voids, or adjusting local thickness. Users can invoke edit operations via natural language prompts or slider controls. By operating directly on the intermediate latent representation, InstructMesh allows users to apply robust geometric corrections without requiring expert modeling skills. To inform our design, we first analyze common fabrication-related failure modes in outputs from state-of-the-art generative tools. We then conduct two user studies, demonstrating that novices can identify and perform fabrication-relevant repairs on generative outputs using InstructMesh, and revealing user preference for hybrid interfaces that combine slider controls with natural language input.

0.37

LMBuild: Evaluating LLM Agents for Generating Buildable and Functional Structures

cs.AI ·2026-10-03 ·Jiateng Liu, Rushi Wang, Cheng Qian, Xuejun Zhang, Sun Li +7 more
benchmark similarity 0.67
Abstract · 64 pages

LLM-based agents are increasingly capable of generating complex 3D structures, with the potential to reshape how objects are designed and realized in the physical world. Yet, producing elegant geometry is fundamentally different from producing objects that can be built and perform their intended functions. Existing evaluations largely focus on geometric quality while overlooking physical realizability. We introduce LMBuild, a benchmark for evaluating LLM agents on generating buildable and functional structures. LMBuild represents generated objects as assembled structures comprising part decompositions, joints, materials, and sequences. To support reproducible evaluation, we provide a unified framework consisting of: (1) an interactive environment in which agents can use tools to retrieve, create, and place components to construct objects; (2) a curated benchmark that repurposes established CAD datasets and augments them with knowledge from Wikipedia; and (3) a evaluation framework covering structural soundness, functional affordance, design quality, and physical realization. Evaluations across 30 systems reveal several intriguing findings: (a) Soundness and alignment are no longer the primary bottlenecks for frontier closed-source models, while functional affordance and physical operability remain substantially more challenging; (b) stronger models more effectively create new components, whereas weaker models tend to rely on retrieval; and (c) providing functional specifications substantially improves part completeness, kinematics, and physical operability. These results show that generating real-world structures requires deeper reasoning about functional affordances, mechanics, and designing and creating novel components. We expect LMBuild to provide a foundation for measuring progress and incentivizing research toward agents that generate buildable and functional structures.

0.42

TailorCoPilot: Enabling Agentic Pattern Making with Version-Controlled State Tracking

cs.HC cs.GR ·2026-08-26 ·Yuexin Sun, Zhaohui Wang, Ruiyang Liu, Demian Kong, Qian He +2 more
top venuecode/datahot direction similarity 0.64
Abstract · To appear in ACM Symposium on User Interface Software and Technology (UIST 2026); Project page: https://fox2049.github.io/tailorcopilot/

Experience-driven manufacturing, such as garment pattern making, faces a severe generational skills gap because its core expertise relies on undocumented tacit knowledge forged through day-to-day practice. To address this challenge, we present TailorCoPilot, an agentic pattern-making system built upon a specially designed version-control backend TailorTrace. TailorTrace models sewing patterns as structured, discrete states and records their transformations during the pattern-making process as explicit operation sequences defined upon the geometry primitives in the sewing pattern (panels, edges, vertices and stitches). Integrated into a conventional pattern-making GUI, TailorTrace enables seamless documentation of senior experts' tacit pattern-making knowledge without breaking their daily workflow. The documented knowledge further offers interactive, pedagogical scaffolding for novices, while providing a robust foundation to power TailorCoPilot and train future generative AI models. In a user study with novices and advanced novices, TailorCoPilot improved task completion rates, reduced time and perceived workload, and yielded higher-quality artifacts compared to skill-appropriate baselines. Ultimately, TailorCoPilot demonstrates a viable pathway to capture practice-based expertise, operationalizing it to support both generative AI advancements and human apprenticeship.

0.77

AgenticCADedit: A Stateful, Tool-Mediated Agentic Approach to Multimodal 3D CAD Editing

cs.CV cs.GR ·2026-08-28 ·Saptarshi Neil Sinha, Mika Silvan Goschke, Paul Julius Kühn, Arjan Kuijper, Michael Weinmann
similarity 0.64
Abstract

Computer-aided design is central to industrial manufacturing, and much of a designer's daily work consists of editing existing models from multimodal requests involving speech, sketches, and model interaction. Existing neural CAD approaches focus predominantly on unconditional or text-conditioned generation. The neuralCAD-Edit approach formalizes expert multimodal editing requests, but its iterative baseline refines a complete CAD program across attempts, executing each attempt from the original model in a stateless CAD environment. Every attempt must therefore reconstruct the entire edit from scratch, so partially correct progress is discarded rather than accumulated, and the model can neither inspect the geometry it has just produced nor selectively revert a single faulty operation. We present AgenticCADedit, which turns editing into a sequence of small, verifiable actions on a persistent CAD state instead of a single regenerated program. Rather than emitting one complete program, it applies incremental code steps that each commit to the session, inspects the resulting faces and edges, renders highlighted selections to verify that the intended region was addressed, and reverts individual operations when it was not. Subsequent actions therefore build on the geometry produced by earlier ones. Our approach improves on all metrics for all three evaluated LLMs (open-weight: qwen3.6-27b, gemma4-31b; proprietary: gpt-5.6-luna), with the largest gains for the weakest baseline model, qwen3.6-27b, whose validity rises from 51.0% to 94.8% and acceptance from 1.6% to 12.0%. A token-cost analysis with gpt-5.6-luna further shows $66.7$% fewer output tokens than neuralCAD-Edit, while $94.8$% of input tokens are served from the prompt cache.

0.16

Gen2Physics: Grounding Generated 3D Meshes in Physics via Multi-View Material Decomposition

cs.CV ·2026-08-24 ·Mauro Comi, Jordi Serrano Berbel, Kevis-Kokitsi Maninis, Philipp Henzler, Manuel Sanchez
similarity 0.63
Abstract

While state-of-the-art generative models produce high-fidelity 3D meshes, these outputs lack the physical properties required for interactive simulation, gaming, or robotics. We introduce Gen2Physics, a unified and automated framework that grounds generated meshes in physics by automatically decomposing them into their constituent material components. Unlike prior approaches, which focus on volumetric representations incompatible with standard physics engines, Gen2Physics operates directly on meshes to produce immediately simulation-ready assets. Our pipeline integrates a fine-tuned Vision Transformer for dense material segmentation, a robust 2D-to-3D consistency projection, and a Vision-Language Model (VLM) guided refinement that leverages contextual reasoning to assign physical properties and infer internal geometry (solid vs. hollow). By converting surface patches into volumes with distinct densities, our method enables physically plausible dynamic simulations. Experimental results on the ABO-500 and PartNet-Material benchmarks demonstrate that Gen2Physics more than doubles the material segmentation accuracy of prior physics-grounding pipelines (15.6 to 48.3 mIoU), while matching the mass-estimation accuracy of volumetric methods and being the only approach to output watertight per-material sub-meshes.

0.47

LLM-Aided Design for Manufacturing: A Multi-Agent System for Intent-Preserving Redesign of CAD for Improved Manufacturability

cs.CE cs.CVcs.MA ·2026-09-03 ·Kojo Welbeck, Xiangyu Shi, Zahra Sadeghi, Qi Zhu, Ping Guo
benchmark similarity 0.63
Abstract · 21 pages, 8 figures

We introduce autonomous, intent-preserving Design for Manufacturing (DFM) redesign of CAD parts: given an engineer's CAD model, the method returns a variant that is easier to manufacture without losing its design intent. Generating such a redesign in a single shot is unreliable, since CAD fidelity degrades as parts grow complex; we instead produce it as a sequence of individually verified design transitions. Our DFM-Redesign pipeline realizes this with two coupled agent subsystems driven by a pretrained multimodal LLM: a DFM Reviewer that inspects the current design and proposes one intent-preserving manufacturability improvement at a time, and a CAD Modifier that executes each proposal as an edit to the part's CadQuery program. The CAD Modifier closes a verification loop, compiling every candidate edit and visually checking it against the intended change from multi-view renderings, then re-generating or re-instructing until the edit is accepted or abandoned. Iterating review and verified modification compounds edits into parts more complex than one-shot generators reliably produce, preserves the original intent at each step, and requires no fine-tuning. On a 46-part benchmark scored by chamfer distance to reference geometries, the CAD Modifier reproduces target parts more accurately on average than chain-of-thought single agents given the same tools, and ablations isolate the contributions of the visual review loop and of captioning the design state before each edit. A centrifugal pump casing built from 32 chained transitions illustrates the complexity reachable by compounding verified edits. This is a preliminary report: evaluation of the full review-and-redesign loop, including manufacturability gain and an operational measure of intent preservation, is ongoing.

0.18

Frontier3DBench: Benchmarking Coding Agents for 3D Creation across Objects, Scenes, and Interactive Open Worlds

cs.CV ·2026-11-06 ·Xinjie Lin, Qingle Liu, Wenyi Li, John Lam, Xiaoqiu Wang +8 more
benchmarkcode/datacommunity pick similarity 0.63
Abstract · 19 pages, 7 figures, 4 tables. Project page: https://lab.einsia.ai/frontier3dbench

Coding agents combine visual understanding with program execution, offering a new route to automated 3D creation. By translating images and instructions into editable programs, they bring reconstruction, generation, and editing into a shared workflow. Yet existing benchmarks fragment evaluation across task scopes and protocols, leaving their capabilities across construction levels unclear. We propose Frontier3DBench, a unified benchmark of 145 tasks across 9 categories spanning object, scene, and interactive open-world creation, with joint evaluation of appearance, structure, and behavior. Experiments with 11 model-harness configurations reveal strengths that vary by level: GPT-6.1-sol leads the object and scene levels and achieves the highest overall score of 66.02/100, whereas GPT-6-astra leads interactive world construction. However, all configurations score lower on reference reconstruction than on text-driven generation in object and scene tasks. Producing plausible content thus remains easier than reproducing specified geometry, layouts, and visual details. Moreover, generated worlds average 83.08/100 on local mechanisms but only 20.82 on motion clearance and 30.26 on stateful workflows: individual mechanisms often function, whereas complete activities that require coordinated actions and persistent state remain difficult. These results identify reference fidelity and coordinated activity completion as central bottlenecks for coding agents in 3D creation.

0.55

ViSculpt: Visual-Centric Agentic Geometry Editing

cs.CV cs.GRcs.HC ·2026-08-25 ·Bo Pang, Jiaqi Pan, Xiaocheng Zhang, Jiacheng Xu, Guoping Wang +1 more
benchmark similarity 0.62
Abstract

3D geometry editing is a critical yet labor-intensive part of the graphics pipeline, requiring artists to translate creative intent into precise operations in complex professional software. Large language models (LLMs) have shown promise for script-based 3D creation, but script generation is less suited to perception-driven editing of arbitrary existing meshes, where execution must remain visually grounded and untouched regions should be preserved. We present a \emph{visual-centric}, training-free multi-agent system that edits existing 3D meshes directly in Blender by emulating the iterative workflow of human artists. Rather than generating scripts or regenerating geometry, our system operates through the Blender GUI: multimodal LLM agents observe the viewport, reason about the current mesh state, and execute localized edits through simulated user interactions. Experiments on a curated benchmark provide initial evidence that this agentic approach can follow natural language instructions, perform representative localized mesh edits, and preserve the overall identity of the input asset. Our results highlight a complementary regime for language-driven 3D editing: direct in-place modification of existing meshes within the native 3D editing workflow. We view this work as an exploratory step toward visual-centric agentic geometry editing in professional graphics software.

0.17