CS Paper Radar

LLM-Aided Design for Manufacturing: A Multi-Agent System for Intent-Preserving Redesign of CAD for Improved Manufacturability

Kojo Welbeck, Xiangyu Shi, Zahra Sadeghi, Qi Zhu, Ping Guo

cs.CE cs.CVcs.MA ·submitted 2026-09-03 18:19 UTC · v1
benchmark

Abstract

We introduce autonomous, intent-preserving Design for Manufacturing (DFM) redesign of CAD parts: given an engineer's CAD model, the method returns a variant that is easier to manufacture without losing its design intent. Generating such a redesign in a single shot is unreliable, since CAD fidelity degrades as parts grow complex; we instead produce it as a sequence of individually verified design transitions. Our DFM-Redesign pipeline realizes this with two coupled agent subsystems driven by a pretrained multimodal LLM: a DFM Reviewer that inspects the current design and proposes one intent-preserving manufacturability improvement at a time, and a CAD Modifier that executes each proposal as an edit to the part's CadQuery program. The CAD Modifier closes a verification loop, compiling every candidate edit and visually checking it against the intended change from multi-view renderings, then re-generating or re-instructing until the edit is accepted or abandoned. Iterating review and verified modification compounds edits into parts more complex than one-shot generators reliably produce, preserves the original intent at each step, and requires no fine-tuning. On a 46-part benchmark scored by chamfer distance to reference geometries, the CAD Modifier reproduces target parts more accurately on average than chain-of-thought single agents given the same tools, and ablations isolate the contributions of the visual review loop and of captioning the design state before each edit. A centrifugal pump casing built from 32 chained transitions illustrates the complexity reachable by compounding verified edits. This is a preliminary report: evaluation of the full review-and-redesign loop, including manufacturability gain and an operational measure of intent preservation, is ongoing.

Comment
21 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

AgenticCADedit: A Stateful, Tool-Mediated Agentic Approach to Multimodal 3D CAD Editing

cs.CV cs.GR ·2026-08-28 ·Saptarshi Neil Sinha, Mika Silvan Goschke, Paul Julius Kühn, Arjan Kuijper, Michael Weinmann
similarity 0.79
Abstract

Computer-aided design is central to industrial manufacturing, and much of a designer's daily work consists of editing existing models from multimodal requests involving speech, sketches, and model interaction. Existing neural CAD approaches focus predominantly on unconditional or text-conditioned generation. The neuralCAD-Edit approach formalizes expert multimodal editing requests, but its iterative baseline refines a complete CAD program across attempts, executing each attempt from the original model in a stateless CAD environment. Every attempt must therefore reconstruct the entire edit from scratch, so partially correct progress is discarded rather than accumulated, and the model can neither inspect the geometry it has just produced nor selectively revert a single faulty operation. We present AgenticCADedit, which turns editing into a sequence of small, verifiable actions on a persistent CAD state instead of a single regenerated program. Rather than emitting one complete program, it applies incremental code steps that each commit to the session, inspects the resulting faces and edges, renders highlighted selections to verify that the intended region was addressed, and reverts individual operations when it was not. Subsequent actions therefore build on the geometry produced by earlier ones. Our approach improves on all metrics for all three evaluated LLMs (open-weight: qwen3.6-27b, gemma4-31b; proprietary: gpt-5.6-luna), with the largest gains for the weakest baseline model, qwen3.6-27b, whose validity rises from 51.0% to 94.8% and acceptance from 1.6% to 12.0%. A token-cost analysis with gpt-5.6-luna further shows $66.7$% fewer output tokens than neuralCAD-Edit, while $94.8$% of input tokens are served from the prompt cache.

0.16

Composable CAD: Sketch-to-CAD Program Synthesis in Parts

cs.GR ·2026-10-31 ·Yuanbo Li, Vivian Liu, Sean Liu, Justin Matejka
similarity 0.72
Abstract

Designers often build CAD models part by part, and may iterate on individual components throughout the design process. Recent vision-language models (VLMs) can synthesize CAD programs from sketches, but generating parts independently does not ensure that they are composable: components may lose the intended proportions and alignments or fail to join correctly where they meet. We present Composable CAD, a framework that uses off-the-shelf VLMs to synthesize a design space of independently sampled, interchangeable component programs, where any selection composes into a coherent CAD model. We recover design constraints from the sketch and use them to construct a coarse proxy that establishes how the components are sized, aligned, and attached. We then generate each component independently from its proxy and apply a deterministic rewrite to ensure that neighboring components meet at their prescribed interfaces. We evaluate Composable CAD across a range of objects and sketch styles and conduct two user studies. Compared to VLM-only baselines, our method produces more detailed, composable designs.

0.16

Can It Actually Work? Synthesizing Functional CAD Mechanisms

cs.CV cs.CLcs.GR ·2026-10-19 ·Wenqian Zhang, Yangyi Huang, Zigeng Xu, Weiyang Liu, Zhen Liu
benchmarkcode/data similarity 0.70
Abstract · 45 pages, 16 figures, project page: https://thegenlab.ai/funcad/

While LLM agents can generate visually plausible CAD assemblies, these designs often fail to fulfill their intended physical functions. We study functional CAD design, a setting where agents interpret underspecified requests to construct and iteratively revise mechanisms that satisfy functional requirements in physical simulation. Verifying these requirements is nontrivial: different candidate mechanisms may realize the same function through entirely different components, controls, and operating sequences. To bridge this gap, we propose FunCAD-Harness, a framework that translates abstract requirements into candidate-specific physical tests and uses simulation feedback to guide design revisions. To systematically evaluate this capability, we introduce FunCADBench, a benchmark spanning 46 mechanism families with interdependent and multi-step operations. Experiments across frontier LLM agents show that FunCAD-Harness exposes subtle mechanical failures invisible to visual inspection, substantially improving functional success rates over standard simulation-augmented baselines. Ultimately, our work marks a step toward CAD agents capable of translating human intent into working mechanisms.

0.39

Design Anything, Design at Scale

cs.CV ·2026-10-17 ·Xuchao Ren, Siyuan Feng, Jing Huang, Yanhua Yao, Jing Wang +6 more
code/data similarity 0.69
Abstract · 47 pages, 25 figures, 16 tables. Project page: https://designanything.gemus.ai

As multimodal resources are transformed into media outputs, agentic AI is expected to stay aligned with design intent over long horizons. Designers follow briefs specifying goals, constraints, and deliverables, with later work building on earlier decisions. Recent work reuses design experience across tasks, yet alignment among artifacts within one project remains challenging. Agents therefore need to preserve and apply this intent across domains and as projects grow. We introduce Design Anything, a graph-based harness that preserves design intent outside the model and binds deliverables to the workflow steps that produce them through an intent-execution graph. A task contract retains constraints and decisions, selected designs become explicit inputs to later generations, and a deterministic controller uses bindings and execution records to check output types and counts, identify outstanding deliverables, and guide subsequent turns. We also introduce DesignAnything-Bench, with 228 tasks across 19 design domains, including 38 project families at scales of 6, 14, and 24 artifacts. With the LLM held fixed, Design Anything satisfies 85.0% and 92.5% of the brief's factual constraints with DeepSeek V4.1 Flash High and GPT-5.6 Sol High, respectively, exceeding the strongest same-model baselines by 15.4% and 14.4%. These gains reach 25.1% and 23.0% on 24-artifact tasks. Under each model, Design Anything leads or ties in constraint satisfaction in 18 of 19 domains. Professional designers also prefer its complete deliverable sets over those of same-model baselines in a blind evaluation.

0.45

Design-to-Plan: A Large Language Model-Based Multi-Agent Framework for Manufacturing Process Planning from 3D CAD Models and 2D Engineering Drawings

cs.RO cs.AI ·2026-08-25 ·Muhammad Tayyab Khan, Lequn Chen, Wenhe Feng, Seung Ki Moon
benchmark similarity 0.69
Abstract · Submitted to Elsevier Journal

Manufacturing process planning transforms heterogeneous design information into coherent manufacturing decisions. However, existing approaches focus on isolated subtasks, such as feature recognition, drawing interpretation, or tool selection, and struggle to support the full reasoning chain from design artifacts to process plans. This is critical when planning must interpret 3D CAD models, 2D engineering drawings, materials, and domain-specific rules. To address this gap, this paper presents Design-to-Plan, a large language model (LLM)-based multi-agent framework for end-to-end manufacturing process planning. An orchestrator coordinates specialized agents for 3D feature recognition, 2D drawing analysis, 2D-3D context fusion, knowledge retrieval, process sequencing, tool selection, and report generation. Rather than using LLMs as standalone text generators, the framework deploys them as reasoning agents that interact with deterministic modules and knowledge sources to produce consistent and traceable decisions. In this hybrid design, deterministic modules and specialized agents extract structured information from CAD and drawing inputs, while LLM agents perform context-aware reasoning, retrieve manufacturing rules, resolve conflicts, and generate planning outputs. The framework is evaluated using 300 benchmark cases across three downstream ReAct-enabled agents, plus separate evaluations of CAD feature recognition, drawing analysis, and 2D-3D context fusion. The parallel architecture achieves 100% success across downstream agents, Tool F1 scores of 95.9%-97.6%, 90% source detection accuracy in conflict analysis, and a 60%-68% reduction in token usage for key planning tasks. Results show that structured LLM-based multi-agent coordination can bridge design representations and manufacturing knowledge, enabling scalable, efficient, and traceable design-to-plan automation.

0.47

LMBuild: Evaluating LLM Agents for Generating Buildable and Functional Structures

cs.AI ·2026-10-03 ·Jiateng Liu, Rushi Wang, Cheng Qian, Xuejun Zhang, Sun Li +7 more
benchmark similarity 0.68
Abstract · 64 pages

LLM-based agents are increasingly capable of generating complex 3D structures, with the potential to reshape how objects are designed and realized in the physical world. Yet, producing elegant geometry is fundamentally different from producing objects that can be built and perform their intended functions. Existing evaluations largely focus on geometric quality while overlooking physical realizability. We introduce LMBuild, a benchmark for evaluating LLM agents on generating buildable and functional structures. LMBuild represents generated objects as assembled structures comprising part decompositions, joints, materials, and sequences. To support reproducible evaluation, we provide a unified framework consisting of: (1) an interactive environment in which agents can use tools to retrieve, create, and place components to construct objects; (2) a curated benchmark that repurposes established CAD datasets and augments them with knowledge from Wikipedia; and (3) a evaluation framework covering structural soundness, functional affordance, design quality, and physical realization. Evaluations across 30 systems reveal several intriguing findings: (a) Soundness and alignment are no longer the primary bottlenecks for frontier closed-source models, while functional affordance and physical operability remain substantially more challenging; (b) stronger models more effectively create new components, whereas weaker models tend to rely on retrieval; and (c) providing functional specifications substantially improves part completeness, kinematics, and physical operability. These results show that generating real-world structures requires deeper reasoning about functional affordances, mechanics, and designing and creating novel components. We expect LMBuild to provide a foundation for measuring progress and incentivizing research toward agents that generate buildable and functional structures.

0.41

GOPR-CAD: Graph-of-Operations Progressive Reasoning for CAD Generation

cs.AI ·2026-11-08 ·Yitian Pang, Yifan Li, Xiaowei Yue, Li Zheng
benchmark similarity 0.68
Abstract

Generating accurate CAD models requires substantial engineering expertise and careful control of geometry, topology, and mechanical constraints. Text-to-CAD aims to simplify this process, but current LLM-based methods often generate CAD programs directly. Language models remain unreliable when producing long code while coordinating coupled geometric, topological, and dimensional constraints. Consequently, executable programs may still produce structurally incorrect models, which execution rate and rendered appearance may fail to reveal. To address these limitations, we propose GOPR-CAD, an agentic Text-to-CAD pipeline based on Graph-of-Operations Progressive Reasoning. A language model acts as a decision agent over encapsulated CAD operations and progressively constructs an executable operation graph, which a deterministic compiler converts into the final CAD model. This separation requires no additional training and supports different language models. To evaluate structural fidelity, we construct MHCAD, a benchmark of 300 standard mechanical part requirements derived from Machinery's Handbook. Their explicit structures enable reference-free STEP/B-rep evaluation. GOPR-CAD achieves 82.7% Structural Yield on MHCAD, and 87.2% Structural Yield on an external CADPrompt subset.

0.35

ReliCAD: From Uncertain LLM Generation to Reliable Parametric CAD Modeling

cs.RO ·2026-09-16 ·Peng Zheng, Xintong Dong, Chuanyang Li, Jiaxin Jing, Chuqi Han +3 more
similarity 0.68
Abstract

Large language models have shown considerable potential for natural-language-driven parametric CAD modeling. However, a fundamental contradiction exists between their probabilistic generation and the deterministic requirements of CAD modeling, resulting in limitations in reliability, design-intent preservation, and geometric validity. Existing methods typically rely on large-scale annotated datasets, lack explicit modeling of design intent, and underutilize the deterministic capabilities of CAD kernels. To address these limitations, we propose ReliCAD, a unified framework that transforms uncertain LLM generation into reliable parametric CAD modeling. Through explicit design-intent modeling, ReliCAD converts user requirements into structured design specifications and explicitly models geometric relations, topological dependencies, and feature construction order. It then generates constraint-aware parametric instructions and invokes the CAD kernel through an Agent-ready API to perform geometric construction and constraint solving. ReliCAD further records runtime evidence and employs a verification-feedback mechanism to assess consistency between the generated model and the design specifications, enabling error localization and iterative repair. Experiments on the public HistCAD generation dataset and our multi-granularity CAD editing dataset demonstrate that ReliCAD significantly outperforms baseline methods, achieving 99.8\% validity rate and 0.8753 IoU. ReliCAD provides a verifiable, repairable, and generalizable approach to natural-language-interactive CAD modeling.

0.12