CS Paper Radar

Design-to-Plan: A Large Language Model-Based Multi-Agent Framework for Manufacturing Process Planning from 3D CAD Models and 2D Engineering Drawings

Muhammad Tayyab Khan, Lequn Chen, Wenhe Feng, Seung Ki Moon

cs.RO cs.AI ·submitted 2026-08-25 03:57 UTC · v1
benchmark

Abstract

Manufacturing process planning transforms heterogeneous design information into coherent manufacturing decisions. However, existing approaches focus on isolated subtasks, such as feature recognition, drawing interpretation, or tool selection, and struggle to support the full reasoning chain from design artifacts to process plans. This is critical when planning must interpret 3D CAD models, 2D engineering drawings, materials, and domain-specific rules. To address this gap, this paper presents Design-to-Plan, a large language model (LLM)-based multi-agent framework for end-to-end manufacturing process planning. An orchestrator coordinates specialized agents for 3D feature recognition, 2D drawing analysis, 2D-3D context fusion, knowledge retrieval, process sequencing, tool selection, and report generation. Rather than using LLMs as standalone text generators, the framework deploys them as reasoning agents that interact with deterministic modules and knowledge sources to produce consistent and traceable decisions. In this hybrid design, deterministic modules and specialized agents extract structured information from CAD and drawing inputs, while LLM agents perform context-aware reasoning, retrieve manufacturing rules, resolve conflicts, and generate planning outputs. The framework is evaluated using 300 benchmark cases across three downstream ReAct-enabled agents, plus separate evaluations of CAD feature recognition, drawing analysis, and 2D-3D context fusion. The parallel architecture achieves 100% success across downstream agents, Tool F1 scores of 95.9%-97.6%, 90% source detection accuracy in conflict analysis, and a 60%-68% reduction in token usage for key planning tasks. Results show that structured LLM-based multi-agent coordination can bridge design representations and manufacturing knowledge, enabling scalable, efficient, and traceable design-to-plan automation.

Comment
Submitted to Elsevier Journal

Closest papers

Nearest neighbours by meaning across the whole index.

Kinematics-Grounded Agentic AI for Robotic Additive Manufacturing Process Planning

cs.RO cs.AIeess.SY ·2026-09-16 ·Jingzhan Ge, Ruimin Chen, Azadeh Haghighi, Jiong Tang, Farhad Imani
similarity 0.74
Abstract · 25 pages, 17 figures

Robotic additive manufacturing (AM) extends material-extrusion printing beyond gantry kinematics but makes process planning robot-dependent. A slicer-generated plan that appears favorable in part coordinates can become infeasible or robotically unfavorable on a manipulator because slicer-process decisions and part orientation determine the generated path, while part orientation and workspace placement affect its kinematic realization. Existing AM tools, large language model (LLM)-based decision-support methods, and digital-shadow systems do not provide integrated pre-execution evaluation of these coupled decisions. This paper presents agentic robotic additive manufacturing (A-RAM), an agent-specialist-tool framework that converts user intent and a part file into traceable, execution-ready plans. The LLM interprets manufacturing objectives and constraints, identifies prescribed and searchable planning variables, and encodes this reasoning in a schema-constrained request; a deterministic Planning Agent instantiates the corresponding search workflow, while domain tools compute quantitative evidence for slicing, placement, inverse kinematics, trajectory timing, Joint-6 jerk, and extrusion. The framework is evaluated on a six-axis robotic-arm AM cell through three case studies covering expert-specified planning, goal-only planning, objective-dependent infill screening, and geometry-dependent orientation-placement selection. Across the evaluated candidate sets, selected plans achieve up to 53.5% lower maximum Joint-6 jerk and 48.3% lower mean absolute Joint-6 jerk than the least favorable valid candidates, while objective-specific infill screening yields motion-plan completion times up to 40.1% shorter and extrusion paths up to 12.7% shorter than the corresponding least favorable screened patterns.

0.15

GOPR-CAD: Graph-of-Operations Progressive Reasoning for CAD Generation

cs.AI ·2026-11-08 ·Yitian Pang, Yifan Li, Xiaowei Yue, Li Zheng
benchmark similarity 0.70
Abstract

Generating accurate CAD models requires substantial engineering expertise and careful control of geometry, topology, and mechanical constraints. Text-to-CAD aims to simplify this process, but current LLM-based methods often generate CAD programs directly. Language models remain unreliable when producing long code while coordinating coupled geometric, topological, and dimensional constraints. Consequently, executable programs may still produce structurally incorrect models, which execution rate and rendered appearance may fail to reveal. To address these limitations, we propose GOPR-CAD, an agentic Text-to-CAD pipeline based on Graph-of-Operations Progressive Reasoning. A language model acts as a decision agent over encapsulated CAD operations and progressively constructs an executable operation graph, which a deterministic compiler converts into the final CAD model. This separation requires no additional training and supports different language models. To evaluate structural fidelity, we construct MHCAD, a benchmark of 300 standard mechanical part requirements derived from Machinery's Handbook. Their explicit structures enable reference-free STEP/B-rep evaluation. GOPR-CAD achieves 82.7% Structural Yield on MHCAD, and 87.2% Structural Yield on an external CADPrompt subset.

0.35

Industrial Agentic AI: LLM-Driven New-Generation Agents for Smart Manufacturing

cs.AI ·2026-10-18 ·Lei Ren, Haiteng Wang, Shixiang Li, Jing Zhang, Yuqing Wang +5 more
survey similarity 0.70
Abstract

Large language models (LLMs) are enabling agents to move beyond predefined workflows toward autonomous planning and execution, creating new opportunities for smart manufacturing. However, dynamic environments, complex physical constraints, and stringent reliability requirements hinder the direct deployment of general-purpose agents in smart manufacturing. This article presents a systematic overview of LLM-driven industrial agents. First, we analyze five key challenges and discuss the concept and core characteristics of industrial agents. We then establish a unified taxonomy covering application scenarios, embodiment forms, and five capability levels. Next, we propose a four-layer system architecture and detail its core modules and operational mechanisms for closed-loop task execution. Finally, we review representative applications across the industrial lifecycle and outline future research directions. This article provides a structured reference for the design, development, and application of industrial agents.

0.08

LLM-Aided Design for Manufacturing: A Multi-Agent System for Intent-Preserving Redesign of CAD for Improved Manufacturability

cs.CE cs.CVcs.MA ·2026-09-03 ·Kojo Welbeck, Xiangyu Shi, Zahra Sadeghi, Qi Zhu, Ping Guo
benchmark similarity 0.69
Abstract · 21 pages, 8 figures

We introduce autonomous, intent-preserving Design for Manufacturing (DFM) redesign of CAD parts: given an engineer's CAD model, the method returns a variant that is easier to manufacture without losing its design intent. Generating such a redesign in a single shot is unreliable, since CAD fidelity degrades as parts grow complex; we instead produce it as a sequence of individually verified design transitions. Our DFM-Redesign pipeline realizes this with two coupled agent subsystems driven by a pretrained multimodal LLM: a DFM Reviewer that inspects the current design and proposes one intent-preserving manufacturability improvement at a time, and a CAD Modifier that executes each proposal as an edit to the part's CadQuery program. The CAD Modifier closes a verification loop, compiling every candidate edit and visually checking it against the intended change from multi-view renderings, then re-generating or re-instructing until the edit is accepted or abandoned. Iterating review and verified modification compounds edits into parts more complex than one-shot generators reliably produce, preserves the original intent at each step, and requires no fine-tuning. On a 46-part benchmark scored by chamfer distance to reference geometries, the CAD Modifier reproduces target parts more accurately on average than chain-of-thought single agents given the same tools, and ablations isolate the contributions of the visual review loop and of captioning the design state before each edit. A centrifugal pump casing built from 32 chained transitions illustrates the complexity reachable by compounding verified edits. This is a preliminary report: evaluation of the full review-and-redesign loop, including manufacturability gain and an operational measure of intent preservation, is ongoing.

0.18

Agentic AI-enabled Semantic Commissioning of a Cognitive Digital Twin for Reconfigurable Manufacturing

cs.RO cs.MA ·2026-09-08 ·Yangyang Liu, Xun Xu, Jan Polzer
published similarity 0.69
Abstract

Rapid bespoke commissioning of the Cognitive Digital Twin (CDT) is a major challenge in reconfigurable manufacturing. Traditional digital twin (DT) construction methods primarily focus on geometric reconstruction, often neglecting the deep semantic integration and functional interoperability necessary for autonomous reasoning. This paper proposes an agent-based, AI-driven workflow to automate end-to-end CDT debugging. The system utilises LangGraph as a multi-agent orchestration engine to achieve dual-path synthesis: the semantic path extracts technical specifications from unstructured documents using Retrieval Augmented Generation (RAG), while the functional path autonomously discovers and binds to real-time industrial telemetry data using Model Context Protocol (MCP). Experimental validation in a robotic machining cell demonstrates that the system achieves a mean average accuracy (mAP) of 97.2% in perception and reduces the deployment cycle from several weeks to an average of 2 hours, marking a paradigm shift from manual scripting to autonomous orchestration.

0.27

Assessing the CAD Capabilities of General-Purpose AI Models: A Case Study of GPT-6 Astra

cs.GR ·2026-10-17 ·Qiang Zou, Jiajun Shen, Zhijie Yang, Yuhao Wang, Shitianyi Leng +1 more
code/data similarity 0.68
Abstract · The paper contains 13 pages of contents that summarize the 181 page long full report of CAD Capabilities of General-Purpose AI Models. The p…

Recent advances in general-purpose AI models and agentic systems have enabled them to perform some CAD tasks. A systematic assessment is now needed to establish what these systems can accomplish and how well their outputs meet engineering requirements. This paper presents an empirical study of GPT-6 Astra, a SOTA general-purpose AI model, across four basic CAD tasks: model understanding, generation, editing, and evaluation. We design test cases spanning different levels of complexity and engineering requirements. The results show that GPT-6 Astra can support multiple stages of CAD workflows, with successful outcomes in cases involving nontrivial geometric complexity. This suggests that general-purpose AI is beginning to offer practical value in almost all steps in CAD workflow. However, gaps remain between generating visually plausible geometry and producing valid, functional, and editable CAD models. Recurring errors in freeform geometry, parameter dependencies, and mating relationships between parts limit engineering usefulness. Agentic iterative refinement can improve results but does not consistently resolve critical errors; long completion times further constrain practical use.

0.28

Task-Driven 3D Printability Assistance via Geometry- and Knowledge-Grounded LLM Reasoning

cs.AI ·2026-08-22 ·Zhaoda Du, Qiaojie Zheng, Xiaoli Zhang
benchmark similarity 0.68
Abstract

Printability assessment in additive manufacturing is typically conducted at the geometry level before printing to determine whether a computer-aided design (CAD) model or stereolithography (STL) file can be successfully fabricated. Task suitability, in contrast, is usually evaluated after printing to determine whether the fabricated part satisfies the requirements of its intended use. As a result, for non-expert users to print functional parts, unsuitable material or process choices may only be identified after fabrication, leading to repeated printing, material waste, and user frustration. To address this challenge, this paper leverages the reasoning and language-understanding capabilities of large language models (LLMs), while grounding the reasoning with geometry evidence and structured material/printer knowledge to generate reliable pre-print recommendations. Given a stereolithography (STL) model and a natural-language task description, the framework generates a structured recommendation covering printability, material choice, process parameters, design guidance, risks, and explanations. We evaluate the framework on focused STL benchmark scenarios with novice-style task descriptions. The proposed method achieves 75.0% printability over 96 physical validation trials, with 88.9% task suitability among successfully printed samples. It also improves Gemini 2.5 Flash-Lite material-selection accuracy from 37.5% under pure LLM to 90.0%. Expert evaluation further shows improved report quality, while post-print feedback improves recommendations on selected problematic cases. These results suggest that user task intent, geometry evidence, and structured material knowledge are all important for reliable task-driven printability assistance.

0.29

CRAFT-AI: Capability and Requirement Alignment for Flexible Manufacturing through Agentic AI

cs.AI ·2026-11-09 ·Kiavash Fathi, Hans Wernher van de Venn
similarity 0.68
Abstract · Preprint intended for submission to the 37th European Safety and Reliability Conference (ESREL 2027)

One of the fundamental needs for reaching resilient production infrastructure is flexible manufacturing, which requires translating changing production requirements into implementable system configurations. This paper introduces \textbf{CRAFT-AI}, an agentic AI approach combining natural language (NL) requirement interpretation, Asset Administration Shell (AAS)-based capability descriptions, and reusable engineering knowledge from existing manufacturing configurations. A tool-using AI agent matches requirements with available capabilities and reference implementations to generate manufacturing scenes and corresponding AAS instances. The approach is demonstrated using a Factory I/O prototype with twelve reference scenes and five illustrative manufacturing tasks of varying complexity, providing an initial feasibility assessment of the proposed AAS-enabled, system-level generative engineering approach. For the four valid user task descriptions, proper requirements, correct references to the relevant engineering knowledge, correct components and lastly a valid Factory I/O scene are generated. For the task with missing engineering knowledge and a wrong sensor selection, the user is informed about which requirements of the scene generation lack domain knowledge and also which sensor is not compatible with the selected raw material by the user with link to the related documentation. After fixing the task description, the correct scene is seamlessly generated. \textbf{CRAFT-AI} highlights the importance of safeguards for risk perception and communication in foundation model-driven solutions.

0.16