CS Paper Radar

CRAFT-AI: Capability and Requirement Alignment for Flexible Manufacturing through Agentic AI

Kiavash Fathi, Hans Wernher van de Venn

cs.AI ·submitted 2026-11-09 09:09 UTC · v1

Abstract

One of the fundamental needs for reaching resilient production infrastructure is flexible manufacturing, which requires translating changing production requirements into implementable system configurations. This paper introduces \textbf{CRAFT-AI}, an agentic AI approach combining natural language (NL) requirement interpretation, Asset Administration Shell (AAS)-based capability descriptions, and reusable engineering knowledge from existing manufacturing configurations. A tool-using AI agent matches requirements with available capabilities and reference implementations to generate manufacturing scenes and corresponding AAS instances. The approach is demonstrated using a Factory I/O prototype with twelve reference scenes and five illustrative manufacturing tasks of varying complexity, providing an initial feasibility assessment of the proposed AAS-enabled, system-level generative engineering approach. For the four valid user task descriptions, proper requirements, correct references to the relevant engineering knowledge, correct components and lastly a valid Factory I/O scene are generated. For the task with missing engineering knowledge and a wrong sensor selection, the user is informed about which requirements of the scene generation lack domain knowledge and also which sensor is not compatible with the selected raw material by the user with link to the related documentation. After fixing the task description, the correct scene is seamlessly generated. \textbf{CRAFT-AI} highlights the importance of safeguards for risk perception and communication in foundation model-driven solutions.

Comment
Preprint intended for submission to the 37th European Safety and Reliability Conference (ESREL 2027)

Closest papers

Nearest neighbours by meaning across the whole index.

Industrial Agentic AI: LLM-Driven New-Generation Agents for Smart Manufacturing

cs.AI ·2026-10-18 ·Lei Ren, Haiteng Wang, Shixiang Li, Jing Zhang, Yuqing Wang +5 more
survey similarity 0.72
Abstract

Large language models (LLMs) are enabling agents to move beyond predefined workflows toward autonomous planning and execution, creating new opportunities for smart manufacturing. However, dynamic environments, complex physical constraints, and stringent reliability requirements hinder the direct deployment of general-purpose agents in smart manufacturing. This article presents a systematic overview of LLM-driven industrial agents. First, we analyze five key challenges and discuss the concept and core characteristics of industrial agents. We then establish a unified taxonomy covering application scenarios, embodiment forms, and five capability levels. Next, we propose a four-layer system architecture and detail its core modules and operational mechanisms for closed-loop task execution. Finally, we review representative applications across the industrial lifecycle and outline future research directions. This article provides a structured reference for the design, development, and application of industrial agents.

0.08

Design-to-Plan: A Large Language Model-Based Multi-Agent Framework for Manufacturing Process Planning from 3D CAD Models and 2D Engineering Drawings

cs.RO cs.AI ·2026-08-25 ·Muhammad Tayyab Khan, Lequn Chen, Wenhe Feng, Seung Ki Moon
benchmark similarity 0.68
Abstract · Submitted to Elsevier Journal

Manufacturing process planning transforms heterogeneous design information into coherent manufacturing decisions. However, existing approaches focus on isolated subtasks, such as feature recognition, drawing interpretation, or tool selection, and struggle to support the full reasoning chain from design artifacts to process plans. This is critical when planning must interpret 3D CAD models, 2D engineering drawings, materials, and domain-specific rules. To address this gap, this paper presents Design-to-Plan, a large language model (LLM)-based multi-agent framework for end-to-end manufacturing process planning. An orchestrator coordinates specialized agents for 3D feature recognition, 2D drawing analysis, 2D-3D context fusion, knowledge retrieval, process sequencing, tool selection, and report generation. Rather than using LLMs as standalone text generators, the framework deploys them as reasoning agents that interact with deterministic modules and knowledge sources to produce consistent and traceable decisions. In this hybrid design, deterministic modules and specialized agents extract structured information from CAD and drawing inputs, while LLM agents perform context-aware reasoning, retrieve manufacturing rules, resolve conflicts, and generate planning outputs. The framework is evaluated using 300 benchmark cases across three downstream ReAct-enabled agents, plus separate evaluations of CAD feature recognition, drawing analysis, and 2D-3D context fusion. The parallel architecture achieves 100% success across downstream agents, Tool F1 scores of 95.9%-97.6%, 90% source detection accuracy in conflict analysis, and a 60%-68% reduction in token usage for key planning tasks. Results show that structured LLM-based multi-agent coordination can bridge design representations and manufacturing knowledge, enabling scalable, efficient, and traceable design-to-plan automation.

0.45

Agentic AI-enabled Semantic Commissioning of a Cognitive Digital Twin for Reconfigurable Manufacturing

cs.RO cs.MA ·2026-09-08 ·Yangyang Liu, Xun Xu, Jan Polzer
published similarity 0.68
Abstract

Rapid bespoke commissioning of the Cognitive Digital Twin (CDT) is a major challenge in reconfigurable manufacturing. Traditional digital twin (DT) construction methods primarily focus on geometric reconstruction, often neglecting the deep semantic integration and functional interoperability necessary for autonomous reasoning. This paper proposes an agent-based, AI-driven workflow to automate end-to-end CDT debugging. The system utilises LangGraph as a multi-agent orchestration engine to achieve dual-path synthesis: the semantic path extracts technical specifications from unstructured documents using Retrieval Augmented Generation (RAG), while the functional path autonomously discovers and binds to real-time industrial telemetry data using Model Context Protocol (MCP). Experimental validation in a robotic machining cell demonstrates that the system achieves a mean average accuracy (mAP) of 97.2% in perception and reduces the deployment cycle from several weeks to an average of 2 hours, marking a paradigm shift from manual scripting to autonomous orchestration.

0.27

Agentic AI-Assisted Modeling for Production Scheduling: Assessment in Constraint Programming

cs.AI cs.SE ·2026-10-07 ·Ángel Sánchez-Fernández, Javier Pernas-Álvarez, Diego Crespo-Pereira
hot direction similarity 0.66
Abstract · 29 pages, 9 figures

Developing optimization models for production scheduling requires substantial expert effort. Research on large language models (LLMs) has followed two directions: specialized approaches for automated modeling, mostly for mixed-integer linear programming, which often rely on dedicated training or problem-specific architectures that limit industrial deployment; and agentic artificial intelligence for operational decision support, which generally assumes that the optimization model already exists. This study bridges both directions by assessing whether general-purpose LLMs, orchestrated as agents without task-specific training, can formulate and implement constraint programming models from natural-language problem descriptions. Singleagent and multi-agent architectures are integrated with a Model Context Protocol server that provides context-aware retrieval of solver documentation to mitigate hallucinations during implementation. Both are compared with a direct LLM baseline on six industry-oriented problems covering flow-shop, job-shop, flexible job-shop and resource-constrained warehouse scheduling, using three LLMs and assessing modeling accuracy, execution success, latency and token consumption. Formulation proves largely within reach of current LLMs, whereas implementation is the main barrier. The multi-agent workflow raises the share of scripts that run correctly as generated from 14.8% with a direct LLM call to 59.3%, reaching 80.6% on the four less complex problems, while tightly coupled intralogistics models remain an open challenge.

0.26

From AI-assisted to AI-native Industrial Control: Architecture, Agent Design, and Challenges

eess.SY physics.soc-ph ·2026-10-26 ·Lisi Liu, Bin Wang, Quan Tang, Chuan Pang, Feng Gao +1 more
similarity 0.64
Abstract

The integration of AI and industrial control is rapidly transforming industrial automation. However, current approaches remain predominantly AI-assisted, where AI functions are incorporated as auxiliary components without fundamentally altering the underlying architecture of industrial control systems. Consequently, the potential of AI to enable higher levels of autonomy, adaptability, and continuous evolution remains underutilized. This paper proposes an AI-native industrial control paradigm, which reconceptualizes industrial control systems by positioning AI as the intrinsic core rather than an external enhancement. The proposed paradigm is built upon an AI-native infrastructure and a collection of collaborative agentic AIs, each encapsulating a set of advanced skills. Among them, the industrial control agent plays a central role in orchestrating the system lifecycle. Through this paradigm, industrial control shifts from a closed, capability-oriented, human-driven, and passive engineering process to an open, task-oriented, intent-driven, and autonomous solution delivery mechanism. The paper further analyzes the key challenges of the AI-native paradigm from both AI and industrial control perspectives, including issues related to AI model reliability, formal verification, real-time assurance, and heterogeneous resource orchestration. Overall, this work outlines a forward-looking vision for industrial control in the AI era and identifies critical research directions toward autonomous, evolvable, and adaptive control systems in complex and dynamic industrial environments.

0.19

Constraint-Driven Context Engineering: Designing Domain Interfaces for AI Systems

cs.SE cs.AI ·2026-09-23 ·Xiwei Xu, Chen Wang, Mengmeng Yang, Yipeng Zhang, Jacky Jiang +4 more
similarity 0.63
Abstract · submitted to conference

Generative AI systems are increasingly deployed to address domain problems. These systems operate under technical, regulatory, institutional, and normative constraints that define acceptable AI behaviour and outcomes within their domains. We observe a recurring pattern in our industry engagement: partners often arrive with a functioning but relatively generic AI solution. The challenge is no longer to build an AI system from scratch, but to improve the quality and domain appropriateness of an AI-generated solution. In these settings, the limiting factor is often the quality, scope, and structure of the context available to the system. Yet, existing context engineering approaches primarily focus on supplying domain knowledge through retrieval, memory, and tools, with limited support for systematically identifying and operationalising the constraints that govern AI systems in their operational environments. This paper proposes Constraint-Driven Context Engineering (CDCE), a design approach for engineering domain interfaces for AI systems. Drawing on software architecture design and Domain-Driven Design (DDD), CDCE treats domain constraints as first-class design drivers. It identifies and characterises constraints, determines the required context assets, and designs representations through which these assets are made available to AI systems. We conducted a comparative multiple-case study with industry and public-sector partners across educational assessment, healthcare decision support, and financial-distress prediction. Depending on their characteristics, constraints can guide AI behaviour, enforce permissible boundaries, or support verification of AI-generated outcomes. The cases demonstrate CDCE's applicability across contrasting domains and show how constraint characteristics shape the resulting domain interfaces.

0.15

Toward Agentic AI-Ready Workflows in Built Environment Organizations: Knowledge Structures and Interoperability Challenges

cs.AI ·2026-11-01 ·Ahmet Bahaddin Ersoz, Justin McHenry, Yevgeniya Kovalchuk, Edward Barrett, Mandana Sarey Khanie
published similarity 0.63
Abstract

The rise of agentic artificial intelligence (AI) in the built environment is shifting attention from isolated AI tools toward autonomous systems that reason, plan, and act across project and organizational workflows. The effectiveness of such systems depends not only on large language model capabilities, but also on the readiness of heterogeneous data environments across the Architecture, Engineering, and Construction (AEC) sector. These environments combine structured sources, such as CAD and BIM models, schedules, cost databases, and asset registers, with unstructured ones, including technical reports, design narratives, planning and policy documents, contracts, meeting minutes, and risk registers. This paper reviews how built environment data can be organized to support agentic AI-ready workflows, focusing on knowledge structures, interoperability, and access and integration mechanisms such as retrieval-augmented generation (RAG) and the Model Context Protocol (MCP). Drawing on existing literature, it examines approaches proposed to organize structured and unstructured data and considers how such data can be contextualized and made accessible to AI agents in a reliable manner. The paper synthesizes current perspectives, highlights challenges around fragmentation and interoperability, and identifies open questions for future research on AI-compatible information management in the built environment.

0.31

Hierarchical Multi-Agent Reasoning Systems for Knowledge-Grounded Material Substitution

cs.LG cond-mat.mtrl-scicond-mat.mes-hall ·2026-10-09 ·Tarjei Paule Hage, Subhadeep Pal, Wei Lu, Yu-Chuan Hsu, Gayla Lyon +2 more
similarity 0.62
Abstract

AI-assisted scientific discovery increasingly seeks to move beyond generating plausible ideas toward reproducible, constraint-aware workflows that can support practical engineering decisions. We present MARS, a hierarchical Multi-Agent Reasoning System for knowledge-grounded material substitution under scientific and manufacturing constraints. We apply MARS to replace per- and polyfluoroalkyl substances (PFAS), a demanding materials-design problem in which substitutes must satisfy functional performance, environmental, experimental, and processing requirements. MARS decomposes substitution into a closed-loop workflow comprising requirement analysis, grounded candidate generation, and manufacturability assessment with process design. The system integrates retrieval-augmented generation, knowledge-graph reasoning, a database of lab-available materials, persistent memory of intermediate results, and rejection-aware iterative feedback. In a PFAS-substitution case study, MARS generates structured material requirements, identifies an evidence-grounded substitute candidate, and develops a lab-scale manufacturing route. In a multi-seed ablation evaluation, MARS achieves the highest overall performance across all three subsystems, with gains that persist when the backbone model is held fixed. These results suggest that hierarchical decomposition, knowledge grounding, and manufacturability-aware refinement improve material-substitution reasoning beyond model capability alone.

0.23