CS Paper Radar

Budget-Aware Federated Dual-Side Channel Estimation for Hybrid mmWave Massive MIMO

Jiawei Chen, Ruining Fan, Mouli Chakraborty, Avishek Nag, Anshu Mukherjee

eess.SP ·submitted 2026-08-14 10:56 UTC · v1

Abstract

This work studies communication-constrained federated dual-side channel state information (CSI) estimation in hybrid millimeter-wave (mmWave) massive multiple input multiple output (MIMO) systems. Accurate CSI recovery is challenging because hybrid beamforming yields compressed and noisy observations, while repeated model exchange in federated learning (FL) makes communication efficiency strongly dependent on estimator size. Rather than developing a new federated optimization algorithm, we focus on estimator design under standard federated averaging (FedAvg) and study how to use a limited parameter budget effectively under repeated model exchange. Based on this perspective, we propose a budget-aware recalibrated refinement network (BARRNet), which combines a compact residual backbone with lightweight channel-wise recalibration for dual-side CSI refinement. Simulation results show that BARRNet achieves a better normalized mean squared error (NMSE)--communication tradeoff than the backbone-only control and heavier convolutional neural network (CNN) baselines. At 5 dB SNR, for the -13 dB DL NMSE target, it reduces the cumulative communication required by 28.9\% relative to the architecture-matched backbone-only control. These results indicate that communication-efficient federated CSI estimation depends not only on model compactness, but also on how limited model capacity is used under repeated model exchange.

Closest papers

Nearest neighbours by meaning across the whole index.

An Efficient SIM Beamforming Scheme Based on Physical-Empowered Projected Gradient

eess.SP ·2026-10-29 ·Yuzhi Yang, Hao Liu, Tianhao Guo, Jiancheng An, Lu Gan +2 more
similarity 0.66
Abstract · under review by ieee trans

Stacked Intelligent Metasurfaces (SIMs) have emerged as a promising technology for next-generation wireless systems. Especially in multi-input multi-output (MIMO) systems, it has the potential to realize complicated wave-domain transformations with low hardware costs and energy consumption. However, SIM-assisted MIMO systems face two major challenges in channel estimation and beamforming. As the SIM elements do not have the signal processing capability, channel estimation can only be conducted in an indirect manner, which makes it challenging. Moreover, the precoding optimization after channel estimation is non-convex and also difficult. Targeting these issues, we exploit the time-division duplex (TDD) channel reciprocity to calculate the gradient backpropagation in an over-the-air manner. Based on this structure, we propose a gradient-based optimization framework that optimizes beamforming without explicitly estimating the SIM--UE channel. The proposed method, namely the physical projected gradient descent (P2GD) method, optimizes the achievable sum rate while incorporating zero-forcing (ZF) constraints. Based on the method of incorporating the ZF restriction, we propose two variations of P2GD, namely user equipment (UE)-P2GD and base station (BS)-P2GD. We also provide a theoretical convergence analysis and projected gradient techniques to ensure physical feasibility. Simulation results show that the proposed approach can achieve suboptimal beamforming in the multi-user system within a small number of over-the-air iterations, using a per-direction signaling budget below the pilot cost of explicit SIM--UE channel estimation. The proposed method provides a low-overhead beamforming scheme for SIM systems without explicit SIM--UE channel estimation.

0.48

Two-Stage Refinement Sparse Channel Estimation for Reconfigurable Intelligent Metasurface Antenna (RIMSA) Massive MIMO

cs.IT ·2026-09-19 ·Yakun Ma, Hui-Ming Wang, Jiaping He, Qingli Yan
top venue similarity 0.65
Abstract

To meet the increasing demands for high data rates and large capacity, next generation wireless communication systems require transceivers equipped with a large number of antennas. Massive multiple-input multiple-output (MIMO) with metasurface antennas has emerged as a promising solution. In this paper, we investigate the channel estimation problem for the emerging reconfigurable intelligent metasurface antenna (RIMSA) array systems. Specifically, we develop a two-stage refinement (TSR) channel estimation method based on the compressed sensing (CS) principle. In the first stage, we exploit the antenna structure of RIMSA to receive pilots by setting identical phase response vectors across all RIMSAs. In this manner, the coherence of the measurement matrix under the CS framework is reduced and the channel estimation performance is improved. However, this special design introduces channel direction-of-arrival (DoA) estimation ambiguity and yields an ambiguous candidate DoA set. In the second stage, we optimize the phase responses of the metamaterial elements to resolve the ambiguity and accurately estimate the DoAs and channel coefficients. Overall, the estimation accuracy is improved in the first stage at the cost of ambiguity, and this ambiguity is eliminated in the second stage. We illustrate the performance advantages of the TSR method by presenting the numerical results and comparing it with the existing methods.

0.28

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

eess.SP ·2026-09-24 ·Atefeh Rezaei, Vahid Jamali, Falko Dressler
similarity 0.64
Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

0.16

Digital Twin-Assisted Fast Beam Alignment for mmWave MIMO Networks

cs.IT cs.LGcs.NI ·2026-10-31 ·Muhammad Kamran Saeed, Ashfaq Khokhar
hot direction similarity 0.64
Abstract

Millimeter-wave (mmWave) communication relies on directional beam sweeping for initial access, which incurs substantial latency and signaling overhead as antenna arrays grow large and deployments become denser. Machine-learning-based beam prediction can reduce this overhead, but its effectiveness depends on training data that accurately reflects the deployment environment, a requirement that is difficult to meet in practice. This paper presents a latency-aware beam management architecture that integrates digital-twin-assisted prediction, regionbased localization, weighted ensemble learning, and explainability-driven beam pruning into a unified framework. A digital twin (DT) generates site-specific ray-traced channel knowledge offline, enabling environment-aware beam prediction without exhaustive real-world measurements and supporting both initial access and beam tracking. The proposed ensemble learning scheme combines a base classifier and a specialist classifier through reliability-weighted fusion to improve prediction accuracy and robustness, while explainable artificial intelligence (XAI)-based attribution pruning reduces the beam codebook to a small subset of the most informative beams for beam allocation. To capture the distributional mismatch between the DT and real-world environments: the network was trained on imperfect digital-twin data but evaluated on real-world surrobase data. Results show that the proposed method achieves 96.80% top-1 and 98.36% top-3 beam prediction accuracy, while reducing over-the-air sounding overhead by nearly an order of magnitude relative to exhaustive sweeping, outperforming convolutional and deep neural network baselines from prior work.

0.34

XL MIMO Extreme Learning Machines: Wave-Domain Inference with Stacked Metasurfaces

eess.SP cs.ETcs.LG ·2026-10-26 ·Kyriakos Stylianopoulos, Mattia Fabiani, Davide Dardari, George C. Alexandropoulos
similarity 0.63
Abstract · Submitted for journal publication

The recently envisioned goal-oriented communications paradigm requires machine learning inference to be performed directly on wirelessly transferred data, by splitting neural network computations between the transmitter, the Receiver (RX), and the wireless channel. Such approaches aim to offload large portions of the computation onto the channel itself, which is often controlled by reconfigurable MetaSurfaces (MSs). Typical MS-parametrized systems, however, enable only limited computation offloading in the wave domain, usually corresponding to a single neural network layer, due to adverse channel fading effects and the almost linear operation of the channel and conventional MS models. In this paper, we demonstrate that an eXtremely Large (XL) Multiple-Input Multiple-Output (MIMO) system equipped with Stacked Intelligent MSs (SIM) at the RX side, together with a single antenna and its accompanying radio-frequency chain, may act as a two-layer neural network operating exclusively over the air. The first (uncontrollable) network layer corresponds to the transformations offered by wireless fading, while the second (controllable) layer is implemented via SIM operations. In particular, only the first, front-end MS layer needs to exhibit nonlinear response to serve as an activation function. Leveraging the Extreme Learning Machine (ELM) framework, the proposed XL MIMO system architecture is shown to be a universal approximator, and the optimal linear-SIM-based combining is derived in closed form, allowing for fast training even and partial signal observability. Numerical evaluations across diverse datasets showcase that the proposed XL-MIMO-ELM framework achieves classification accuracy comparable to idealized digital models, thereby, proving the viability of low complexity, wave-domain neural computations.

0.38

Mean Spatial Frequency Decoupling for Learning-Based Uplink-to-Downlink Covariance Conversion in FDD Massive MIMO

eess.SP cs.LG ·2026-09-30 ·Melih Can Zerin
benchmark similarity 0.62
Abstract

In frequency division duplexing (FDD) massive multiple-input multiple-output (MIMO) systems, the uplink (UL)-to-downlink (DL) channel covariance matrix (CCM) conversion problem is studied to relieve the heavy burden of DL training and feedback required for channel estimation. Learning- based methods perform well up to a certain array size, but for a fixed dataset size their accuracy deteriorates with the number of antennas, to the point where simple model-based methods outperform them. This paper identifies a key cause of this behavior and addresses it. The mean angle of arrival (AoA) induces a phase ramp along the lags of the CCM. Since the oscillation rate of this ramp grows with the number of antennas, a dataset of fixed size becomes increasingly sparse relative to the variation that must be captured. We propose estimating the slope of this ramp from the UL CCM separately and mapping it to the DL band in closed form, leaving the learner with a residual that is largely insensitive to the mean AoA, which substantially reduces the performance degradation with an increasing number of antennas. The proposed scheme, termed deramping, is a combination of pre- and post-processing steps that applies to learning-based conversion methods without altering their internal structure, as demonstrated on three structurally different learners. Simulation results show that deramping reduces the covariance estimation error of all three learners under uniform, Laplacian, and Gaussian angular power spectra,keeps the interpolation-based learners ahead of a model-based benchmark at large array sizes, and improves downlink channel estimation.

0.21

Practical Deep Learning-Based Block Demapping for mmWave MIMO Systems

cs.AR ·2026-11-08 ·Syed Asrar ul haq, Jesus O. Lacruz, Joerg Widmer, Sumit J. Darak
published similarity 0.62
Abstract · Submitted for publication to IEEE Transactions on Wireless Communications

Deep learning is expected to play a central role in 6G systems, by enabling data-driven physical layer designs that can adapt to practical wireless impairments. This is particularly important for millimetre-wave (mmWave) multiple-input multiple-output (MIMO) systems, which are strongly affected by residual channel distortions, interference, and hardware non-idealities that are difficult to capture with analytical models. In this paper, we propose a deep learning-based soft demapper that performs block-wise processing of received symbols instead of conventional symbol-wise detection. The demapper employs a one-dimensional convolutional neural network to learn temporal structure induced by practical propagation and hardware effects, while producing soft bit outputs compatible with soft-decision decoding stages. The proposed approach is trained and evaluated for a 4$\times$4 wideband mmWave MIMO system at 60~GHz, using an over-the-air dataset collected across multiple days and settings. Experimental results demonstrate consistent improvements over a conventional soft-decision demapper, including up to a 2.6$\times$ reduction in bit error rate for 16QAM and up to a 17.6$\times$ reduction for 64QAM under real over-the-air mmWave MIMO conditions. The proposed demapper is further implemented on a Zynq RFSoC platform using a reconfigurable convolution engine and fixed-point arithmetic, achieving an approximately 34.3$\times$ speedup compared to a processor-based implementation, and demonstrating that learning-based demapping can be deployed efficiently on resource-constrained edge hardware.

0.32

FACE: Flow-Guided Angular Channel Estimation Framework for mmWave MIMO Systems

cs.LG ·2026-11-16 ·Samitha Gunarathne, Eslam Eldeeb, Nurul Huda Mahmood, Matti Latva-aho
benchmark similarity 0.61
Abstract · 14 pages, 11 figures

Acquiring accurate channel state information (CSI) is essential for millimeter-wave (mmWave) multi-input multi-output (MIMO) systems. However, it remains challenging due to high-dimensional channels, limited pilot observations, and measurement noise. To address these challenges, we propose flow-guided angular channel estimation (FACE), a novel channel estimation framework based on flow matching, an emerging generative modeling paradigm that learns continuous transport dynamics between probability distributions. FACE exploits the inherent angular-domain sparsity of mmWave channels and incorporates the learned flow matching model as a generative channel prior. Numerical results show that FACE consistently achieves higher channel estimation accuracy than both conventional estimators and diffusion-based generative estimator across diverse channel and system configurations. Moreover, FACE maintains high estimation accuracy with fewer pilot observations and achieves an average achievable rate close to the perfect-CSI benchmark. Compared with diffusion-based estimation, FACE requires substantially fewer sampling steps while achieving superior or comparable estimation accuracy, reducing inference time and computational cost. Overall, the proposed framework demonstrates the potential of flow matching for accurate, pilot-efficient, and computationally efficient mmWave MIMO channel estimation.

0.33