CS Paper Radar

MMUSV-Sim: A Maritime Simulation Platform for Multi-USV Cooperative Perception

Ziao Li, Jianxiong Ye, Biao Tang, Leping Zhang, Kun Zuo, Siyu Huang, Mengtang Li, Deyu Meng, Chenqiang Gao

cs.RO cs.CV ·submitted 2026-08-14 11:32 UTC · v2
benchmarkcode/data

Abstract

Perception from a single unmanned surface vehicle (USV) is limited by sensing range, field of view, and occlusions caused by islands, port infrastructure, and nearby vessels. Multi-USV cooperative perception can alleviate these limitations by integrating complementary observations from distributed viewpoints. However, progress is constrained by the high cost of coordinated sea trials, the scarcity of multi-USV datasets, and the lack of integrated maritime simulation and evaluation tools. We present MMUSV-Sim, a perception-oriented maritime simulation and data-generation platform built on Unreal Engine 5 and Project AirSim. It supports configurable maritime scenarios, synchronized multimodal acquisition across multiple USVs, and consistent 3D annotations in a shared world frame. Using MMUSV-Sim, we construct MarU2U-200m, a synchronized multi-USV RGB--LiDAR dataset with 341 sequences and 14,385 scene frames. We establish a cooperative bird's-eye-view (BEV) vessel detection benchmark with LiDAR and RGB--LiDAR inputs. Experimental results show that Early Fusion improves LiDAR detection AP@0.5 from 64.26 to 81.46 compared with the single-USV baseline. RGB features further improve intermediate fusion, increasing AP@0.5 by up to 4.55 percentage points. LiDAR and RGB transfer experiments also show the value of the generated data as a pretraining source for real maritime detection. The project are available at https://github.com/lizaowo/MMUSV-Sim

Closest papers

Nearest neighbours by meaning across the whole index.

Navigational Safety of Marine Surface Vehicles in Restricted Visibility: From Intelligent Vision to Vision-Centered Multi-Sensor Fusion

cs.CV ·2026-11-04 ·Ryan Wen Liu, Fengchuan Song, Tianxiang Wang, Guobei Peng, Youngrong Kim +5 more
code/data similarity 0.69
Abstract · 42 pages, 16 figures

Marine surface vehicles (MSVs) have attracted considerable attention for their commercial, scientific, and military applications. Owing to their favorable performance-to-cost ratio, shipboard cameras are widely used to detect and recognize potentially hazardous situations across diverse operational scenarios. However, visual perception is inevitably degraded by restricted conditions, including irregular motion of the imaging platform, adverse weather, and long imaging distances. To improve situational awareness and navigation capabilities, complementary sensors, such as the automatic identification system (AIS), radar, and light detection and ranging (LiDAR), etc., have become essential shipboard equipment. Multi-sensor fusion can provide richer perceptual information and help ensure navigational safety of MSVs in restricted visibility. This article reviews recent progress from intelligent vision to vision-centered multi-sensor fusion for newcomers and researchers in intelligent ship navigation and intelligent waterborne transportation system (IWTS). After introducing the generation of quality-degraded images in restricted visibility, we will review intelligent vision methods for four key issues, i.e., shipboard video stabilization, visual perception enhancement, object detection and tracking, and navigable area segmentation. We then examine vision-centered multi-sensor fusion methods, including infrared-visible image fusion, radar-vision fusion, LiDAR-vision fusion, AIS-vision fusion, and other multi-sensor fusion scenarios. Open-source datasets and safety-critical applications are also summarized and discussed. Finally, we highlight open challenges and future research directions. The collected maritime datasets are available at https://github.com/MAPGroup/Datasets and will be regularly updated.

0.36

SV2V-RSim: A Comprehensive Benchmark for Self-Selective V2V Cooperative Perception with Near-Realistic Data

cs.CV ·2026-09-26 ·Yulu Wu, Chao Wei, Jujun Cheng, Zhangkai Ni, Haowen Wang +4 more
benchmark similarity 0.66
Abstract

Vehicle-to-Vehicle (V2V) cooperative perception enhances autonomous driving by enabling vehicles to share information beyond their direct line of sight. However, existing V2V datasets are limited by a small number of participating agents, static collaborator selection strategies, and a significant domain gap between simulated and real-world environments. To overcome these challenges, we introduce SV2V-RSim, a large-scale, multi-modal, near-realistic simulation dataset engineered to elevate agent diversity and realism. Additionally, we present the Select Vehicles Adaptively (SVA) module, which optimizes collaborator selection to balance perception performance against communication bandwidth constraints. Our dataset is generated using the Unreal Engine 5-based simulator that integrates high-fidelity 3D assets, diverse environments, and intricate traffic scenarios. All vehicles within a specified range of the ego vehicle are equipped with sensor suites, enabling dynamic and adaptive collaborator selection. SV2V-RSim encompasses four maps, four weather conditions, six time periods from sunrise to night, 203K LiDAR frames, 402K RGB frames, and 788K annotated 3D bounding boxes across 17 object classes, supporting a range of cooperative perception tasks such as 3D object detection, segmentation, and depth estimation. Benchmarking on recent cooperative perception algorithms demonstrates that SVA achieves a superior performance-bandwidth trade-off, while sim-to-real experiments and No-Reference Image Quality Assessment validate the dataset's high realism and practical effectiveness. Our dataset and code will be publicly available.

0.27

PALIN: Pixel-Aligned LiDAR-NIR Multimodal 3D Object Detection with Benchmark

cs.CV ·2026-11-14 ·Yanan Zhang, Amit Vishnia, Chengbo Ai, Eleni Christofa, Runan Cheng +4 more
benchmark similarity 0.65
Abstract · 17 pages, including references and appendices

3D object detection is critical for intelligent transportation systems. LiDAR has been widely adopted for accurate geometric measurements; however, purely geometric representations remain ambiguous under sparse observations and occlusions, while cross-sensor multimodal fusion suffers from calibration and synchronization errors. To overcome these challenges, we leverage an Ouster LiDAR to construct PALIN (Pixel-Aligned LiDAR-NIR), a large-scale intrinsically pixel-aligned multimodal dataset jointly capturing geometry and NIR intensity, comprising approximately 8,000 annotated frames from static urban intersections and diverse mobile suburban scenes. Building upon this dataset, we propose CMambaFusion, a novel fusion framework consisting of a four-directional Cross-Mamba module for bidirectional cross-modal interaction and a Gated Concat-Mamba module for joint feature refinement. Extensive experiments demonstrate that PALIN enables effective multimodal learning, and CMambaFusion achieves superior accuracy-efficiency trade-offs over both LiDAR-only and representative fusion baselines.

0.18

FastBEVFusion: Simple Multi-Modal Fusion for 3D Object Detection at 50 FPS

cs.CV cs.RO ·2026-10-27 ·Tom Sanitz, Emre Gülsoylu, Simone Frintrop, Christian Wilms
published similarity 0.65
Abstract · Accepted at Iberian Robotics Conference (ROBOT2026)

Reliable real-time 3D object detection based on LiDAR and camera data is critical for safety in autonomous driving, where systems must accurately perceive their surroundings with minimal latency. Many state-of-the-art systems achieve high-quality detection results but fail to meet real-time constraints, limiting their practical use. To address this challenge, we propose FastBEVFusion, a simple, fast, and robust fusion system for 3D object detection. Based on modality-specific features, FastBEVFusion projects these features into semi-aligned modality-specific BEV spaces, without relying on a computationally intensive and potentially error-prone depth estimation. Given these BEV spaces, we propose a light-weight, soft, and dynamic fusion module based on cross-attention, which adapts dynamically to the scene context and enables feature fusion across the entire BEV spaces. Experiments on the complex nuScenes dataset show that FastBEVFusion outperforms state-of-the-art real-time systems, and achieves over 50 FPS without deployment libraries. Additionally, our system shows strong robustness to calibration errors, making FastBEVFusion a powerful 3D object detection system for real-world applications.

0.28

IndoorBEV: A Lightweight Real-Time LiDAR BEV Perception System for Indoor Mobile Robots

cs.RO ·2026-09-30 ·Haichuan Li
code/data similarity 0.65
Abstract

Efficient indoor LiDAR perception is challenging because mobile robots must understand cluttered three-dimensional environments under strict latency and memory constraints. Existing point-based and voxel-based methods often incur substantial computational overhead, whereas conventional bird's-eye-view (BEV) representations improve efficiency at the cost of discarding vertical geometric information. We present IndoorBEV, a lightweight LiDAR perception framework that mitigates this tradeoff through a height-aware BEV representation and geometry-conditioned feature fusion. IndoorBEV summarizes the vertical point distribution in each BEV cell using statistical height features and multi-frequency height encoding, allowing informative three-dimensional cues to be processed efficiently by two-dimensional convolutions. A lightweight encoder then integrates complementary geometric features with multi-scale local representations and compact global scene context. Decoupled dense prediction heads jointly produce semantic BEV maps and oriented object bounding boxes. IndoorBEV contains only 0.6M parameters and requires 2.3 MB of model storage. On an NVIDIA AGX Orin, it uses 21.52 MB of GPU memory per inference and achieves a mean latency of 169.6 ms under a 200 ms perception deadline, with a deadline miss ratio of 1.8\%. Evaluations on simulated scenes, real-world robot scans, and an open-source indoor point-cloud dataset demonstrate a favorable tradeoff among perception accuracy, latency, and memory consumption. These results indicate that explicitly encoding vertical geometry within a compact BEV representation provides an effective approach to resource-efficient indoor LiDAR perception.

0.24

Seeing above the waves: A modular sensing framework for data acquisition at sea

cs.RO ·2026-08-11 ·Jonathan E. Schmidt, Julius Wirbel, P. Nicholas Hansen, Morgan Louédec, Christian L. H. Westerdahl +2 more
published similarity 0.65
Abstract · Submitted and accepted to the IFAC WC 2026 as an invited session paper for track 7.2 Transportation and Vehicle Systems - Marine Systems

Advancing autonomy for surface vessels requires systematic evaluation of their sensing and perception subsystems. Yet, maritime environments impose unique challenges: sensor installation is constrained by vessel layout, environmental conditions such as fog or sea clutter are difficult to reproduce, and long-duration missions complicate data collection. This work addresses the question: How can we design a modular and reproducible sensor platform for maritime autonomy? We present a comprehensive design blueprint that incorporates diverse modalities - RADAR, LiDAR, IMU, GNSS, AIS, RGB and LWIR cameras, and weather sensors - to enhance environmental awareness and vessel proprioception. Supported by a dedicated ROS2-based software framework for data management, our modular platform enables long-term data collection, hardware-in-the-loop testing, and integration with existing sensors and algorithms. By unifying hardware design and data capture methodology, the platform enhances reproducibility and comparability across vessels and research projects. The proposed framework bridges engineering implementation and research methodology, providing the foundation for standardized, verifiable datasets essential to advancing situational awareness and autonomous maritime navigation.

0.19

MM-BEV: Enhancing Timeliness by Computing Where and When it Matters

cs.RO cs.CVcs.DCeess.SY ·2026-08-15 ·Liangkai Liu, Kang G. Shin
similarity 0.64
Abstract · 12 pages, 20 figures

Multimodal bird's-eye-view (BEV) perception combines LiDAR depth accuracy with dense camera semantics, but its high computational cost and imperfect sensing conditions make real-time deployment challenging. Existing methods largely compress individual detectors and overlook three opportunities: structured sparsity within camera and LiDAR inputs, timing misalignment between modalities, and the fact that many detected objects do not affect the planner's immediate action. We present MM-BEV, a real-time multimodal BEV system guided by a simple principle: compute where and when it matters. MM-BEV divides perception into mandatory work for safety-critical objects within braking distance of the ego vehicle and with short time-to-collision (TTC), and optional work for less urgent regions. It prioritizes mandatory work and reduces or sheds optional work under tight compute budgets. MM-BEV integrates four mechanisms: (1) a criticality-ranked temporal ROI selector based on motion-extrapolated detections from prior frames; (2) sparse, ROI-aware feature extraction using shared-shape camera crops at context-adaptive resolution and ROI-aware LiDAR voxelization; (3) a latency-aware coordinator that adapts LiDAR sweeps, image resolution, and keyframes according to scene dynamics and TTC; and (4) an asynchronous scheduler that decouples sensing from inference and skips stale frames. On nuScenes, MM-BEV reduces inference latency by 1.96x and end-to-end latency by 2.93x, with no loss in geometry-critical recall and only a 0.2 percentage-point drop in safety-critical recall. On a Clearpath Husky A300 equipped with an Ouster-128 LiDAR, BEV cameras, and a Jetson AGX Orin, MM-BEV further reduces mean latency by 2.11x, demonstrating its potential for real-world autonomous systems.

0.40

Air-Ground Collaborative Vision-and-Language Navigation via Shared Bird's-Eye Maps

cs.RO cs.AI ·2026-09-03 ·Shuning Zhang, Liang Li, Yunheng Wang, Tao Wang, Yihang Kang +1 more
code/datahighly cited similarity 0.64
Abstract · 8 pages, 5 figures

Air-ground collaborative Vision-and-Language Navigation (VLN) pairs an unmanned aerial vehicle (UAV) with a global bird's-eye view and an unmanned ground vehicle (UGV) with a local first-person view, yet the setting remains largely unexplored: existing training-free methods solve single-agent tasks but offer no collaboration mechanism, and a recent CARLA-Air evaluation found no stable cooperative behavior across five state-of-the-art VLA models; naive semantic communication or bidirectional coupling even degrades performance. We establish AGC-VLN (Air-Ground Collaborative VLN), the first training-free baseline for air-ground collaborative VLN. The key insight is that training-free methods decompose navigation into VLM-based semantic reasoning and deterministic geometric execution, exposing a collaboration interface: the UAV's global view, over which it renders the UGV's reported pose and the VLM-anchored target as CAR/GOAL markers with distance labels, yielding a shared bird's-eye map. From this map, the UGV acquires global spatial context its first-person view cannot provide, plans a road-following path with a frozen VLM, and executes it under closed-loop control; in parallel, the UAV runs 3D-SPF, a spatial-search upgrade of SPF that localizes the target in the downward view and flies toward it. On 100 closed-loop episodes in CARLA-Air's Town10HD scene, AGC-VLN reaches a 77.0% joint success rate, a collaboration gain of +27.0% over the weaker individual agent (the UAV, 50.0%), and exceeds the strongest published single-agent baseline (Travel UAV, 53.0%) by 24.0 points, stemming from the complementarity of the UAV's global view and the UGV's road-following execution. Project page: https://github.com/ZSN2024/AGC-VLN.

0.59