CS Paper Radar

MISTac: A Vision-Based Tactile Sensor for Minimally Invasive Surgery

Robin Koch, Annabella Mascot, Rayan Younis, Martin Wagner, Stefanie Speidel, Mark Cutkosky, Ingo Sieber, Roberto Calandra

cs.RO ·submitted 2026-08-14 15:52 UTC · v1
code/data

Abstract

Minimally invasive and robot-assisted surgery offer many advantages over traditional open surgery, but deprive surgeons of tactile feedback and the ability to palpate tissue with their fingers. To address this lack of tactile feedback, we introduce the MISTac, a high resolution vision-based tactile sensor specifically designed for palpation in MIS. The sensor has a replaceable sensor tip with a diameter of 8 mm which allows it to fit through the trocars used in minimally invasive surgery. Its modular 3D-printed case design allows the use of bulky off-the-shelf illumination and imaging hardware that can easily be exchanged and upgraded. The sensor has an optical resolution of 176.68 $μm$, a tactile resolution of 250 $μm$, and can resolve forces as little as 24.3 mN. An in vivo study with the sensor shows its usability in minimally invasive surgery. We trained a machine learning model with the tactile data collected in the trial on a tissue classification task achieving an aggregate accuracy of ~84% in a leave-one-out cross validation. Tactile sensors have the potential to one day aid surgeons during minimally invasive surgery with tasks such as tissue classification or intra-operative tumor localization; MISTac is a small step towards this vision. We open-source MISTac at https://github.com/lasr-lab/mistac

Comment
This work has been submitted to the IEEE for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Vision-Based Tactile Intelligence for Robotics: Sensing, Learning, and Embodied Manipulation

cs.RO ·2026-08-16 ·Peng Zhou, Jun Hu, Sihan Chen, Zeqing Zhang, Haofei Ma +10 more
similarity 0.68
Abstract

Tactile sensing is essential for robots in contact-rich tasks, yet many tactile sensors still provide sparse, low-dimensional signals that do not capture sufficient information for complex robotic perception and interaction. Vision-based tactile sensors (VBTSs) offer a powerful alternative by con-verting contact-induced deformation of a soft interface into im-ages. The image-based formulation gives VBTSs high-resolution, information-rich tactile observations that enable complex robotic tasks. This review surveys the full VBTS pipeline and treats sensing hardware, learning methods, simulation, and datasets as an integrated sensing-and-learning system. We 1) organize representative VBTSs into a hardware taxonomy structured by deformable elastomer design, sensor size and shape, and optical system design to guide future sensor development; 2) present a hierarchical view of learning-based tactile intelligence from low-level signal understanding to task-level policies and foundation models; and 3) examine simulation platforms and tactile datasets as a scaling layer, together with sim-to-real transfer and cross-sensor adaptation for training, benchmarking, and deployment. Finally, we identify open challenges and future directions for VBTSs in robotics. By providing a holistic view of how hardware, AI architectures, simulation, and datasets interact, this review aims to advance tactile intelligence for contact-rich robotic tasks.

0.40

Robust Slip Detection and Material Classification via Spatiotemporal Transformers on a Uniformly-Illuminated Visuo-Tactile Sensor

cs.RO ·2026-08-25 ·Ziyang Ma, Yuhao Sun, Zichen Ai, Xiangyang Ji, Bin Fang
publisheddataset similarity 0.65
Abstract · Accepted at IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2026. 8 pages, 10 figures

Tactile sensing is central to robotic manipulation, among which slip detection stands out as a quintessential and critical task. However, existing slip datasets are predominantly limited to binary classification, lacking fine-grained directional perception. To address this limitation, we propose a visuo-tactile sensor featuring customized uniform RGB illumination, alongside a unified perception framework. At the hardware level, the sensor achieves high-precision, sub-millimeter depth reconstruction. Based on this capability, we collect a multi-task visuo-tactile dataset encompassing 15 objects, synchronously generating depth information for each data sample. Algorithmically, we design a dual-head TimeSformer network to process dynamic spatiotemporal slip. On unseen objects, this network achieves robust accuracies of 95.5% and 91.5% for 3-class contact state prediction and fine-grained 8-class slip direction classification, respectively. Furthermore, static tactile-based object class recognition utilizing a ResNet-50 backbone yields an outstanding accuracy of 98.8% across 15 categories. The proposed hardware-software framework provides high-fidelity feedback and a powerful multi-modal perception baseline for complex robotic manipulation.

0.27

Hall Effect-Based Tactile Force Detection Sensor for Robot-Assisted Minimally Invasive Surgery

cs.RO ·2026-10-07 ·Charles DeLorey, Michael Brockdorff, Adam Metcalf, Benjamin Calmé, Pietro Valdastri +1 more
similarity 0.64
Abstract · 9 pages, 12 figures

Robotic minimally invasive surgery has revolutionized surgical practice. However, as the surgeons are mechanically separated from the surgical tools, loss of tactile feedback occurs. We present a compact force sensor with three, millimeter scale sensing elements (taxels) that can be affixed to the grasping face of a robotic surgical tool. The sensor features a miniaturized design using Hall effect sensors and magnets embedded in a deformable elastomer contact layer. Sensor calibration is achieved with a 6 degree of freedom (DoF) parallel robot. Each taxel can detect applied normal and shear forces with average RMSE of 2.133 kPa. The calibrated sensor was validated on phantom and ex vivo porcine tissue, demonstrating tactile sensing during retraction as well as slip. This work introduces a small-scale Hall effect based tactile sensor, enabling sensing for force-sensitive robotic surgical applications.

0.17

Scene Graph-Driven Haptic Feedback for Safety Enhancement in Robotic Ophthalmic Surgery via Physically Simulated iOCT

cs.RO cs.CV ·2026-09-07 ·Danial Arbabi, Korab Hoxha, Angelo Henriques, Mirza Imamovic, M. Ali Nasseri
published similarity 0.64
Abstract · 7 pages, 9 figures, 2 tables. Accepted at the 2026 IEEE RAS/EMBS 11th International Conference on Biomedical Robotics and Biomechatronicsnic…

Robotic ophthalmic surgery offers high precision but introduces a "sensory gap" by decoupling the surgeon from their instrument, resulting in a loss of tactile feedback. This paper presents a novel haptic feedback system for subretinal injection tasks leveraging Scene Graphs (SG). The system bridges the sensory gap by analyzing a physically simulated intraoperative Optical Coherence Tomography (iOCT) feed to construct a real-time surgical SG. The SG serves as a semantic abstraction layer for the surgical scene, which is then utilized by a deterministic, rule-based engine to generate state-dependent haptic feedback on a robotic input device. The system was evaluated in a user study (N=16) using an anthropomorphic head phantom and a custom-built surgical robot. Results demonstrate that the SG-driven haptic feedback improved surgical precision, reducing needle alignment error by 14% (p = 0.044) and improving System Usability Scale (SUS) scores by 8% (p = 0.015), while maintaining comparable task completion times. A needle trajectory analysis revealed the emergence of a safer "Align-then-Approach" strategy, in which our haptic negative reinforcement prompted users to fine-tune the tool's trajectory before approaching the retinal target. This work suggests that SGs can effectively serve as the direct computational foundation for real-time, safety-enhancing context-aware haptic feedback in robotic microsurgery.

0.40

OpenTac: An Open Ecosystem for Customizable, Scalable, and Transferable 3D Tactile Sensing

cs.RO eess.SPeess.SY ·2026-10-22 ·Ariel Slepyan, Geeta Chandra Raju Bethala, Jiafeng Gu, Anagha Rajendra Dangle, Yinzhe Zhou +10 more
code/data similarity 0.64
Abstract · 15 pages, 15 figures. Project website, open-source hardware and software, and demonstration videos: https://opentac.github.io

We present OpenTac, a novel sensor and a full-stack ecosystem for tactile skins that are highly customizable, scalable, and readily deployed in downstream robot control and learning applications. Our core contribution is twofold. First, we develop a scalable resistive tactile skin with a structured deformable overlay that converts tangential loading into spatially varying pressure. Differential responses across neighboring "taxels" support decoding of local shear vectors, and the common-mode response encodes normal force. Second, we provide a highly customizable sensor design tool that is able to automatically generate fabrication files for these tactile skins from 2D outlines and developable 3D surfaces, including from abstract descriptions such as text. We develop an ecosystem around the OpenTac sensor, including the CAD design tool, a sensor simulator, cross-sensor transfer, and fast/adaptive data acquisition. We demonstrate the broad applicability of the OpenTac-CAD sensor design tool by designing and fabricating more than 30 sensors across a variety of robot embodiments. We characterize the three-dimensional tactile fields produced by OpenTac with a commercial, high-precision force/torque sensor. We demonstrate the broad applicability of 3D tactile sensing across contact-rich feedback control and manipulation policy learning on four real-world robot embodiments. Additionally, adaptive acquisition enables kilohertz-rate partial readouts, and our readout circuitry enables high dynamic range (HDR) acquisition, measuring, for example, a 3.7 kg weight stack and a 20 g weight on the same sensor in the same frame. We provide all hardware, software, and result videos at opentac.github.io

0.21

TACTIC: Understanding Tactile Encoders and Conditioning for Contact-rich Robot Manipulation Policies

cs.RO ·2026-09-25 ·Seongjin Bien, Débora Oliveira Makowski, Carlo Kneissl, Reihaneh Mirjalili, Pankhuri Vanjani +4 more
similarity 0.64
Abstract

Tactile information is essential for contact-rich manipulation tasks in robotics. Vision-based tactile sensors make it particularly easy to design end-to-end manipulation policies with tactile sensing, as they enable the use of existing encoders from computer vision. However, this has led to a huge variety of architectures, training datasets, and evaluation protocols, making it difficult to determine which design choices best encode touch. In this work, we address this gap and present a comprehensive study of tactile encoders and fusion strategies across various contact-rich manipulation tasks in real-world experiments. To enable a controlled comparison, we train and evaluate all models under the same pipeline and experimental setup, comprising more than 2000 real-world rollouts. Our results go beyond other studies that only compare simulation performance, which does not necessarily translate to real-world settings, where large-scale evaluations are needed to obtain reliable statistics. Our key finding is that there is no universally optimal representation or fusion strategy for encoding visual-tactile. Instead, the best encoder backbone and fusion scheme depend strongly on the task.

0.21

DeTac: Dual-branch Decoupling of Texture and Force Signals in Vision-Based Tactile Sensors

cs.RO ·2026-10-12 ·Zhirui Zhang, Yunkai Tang, Jiahang Li, Fan Fei, Jinnuo Zhang +4 more
published similarity 0.62
Abstract · Accepted at the 10th Conference on Robot Learning (CoRL 2026). 17 pages, 11 figures

Vision-based tactile sensors enable fine-grained perception for dexterous robotic manipulation, but current marker-based designs tightly couple surface texture and contact force signals within a single observation. Existing data-driven decoupling methods rely on serial mask-based inpainting, which suffers from mask-sizing dilemmas caused by physical indentation effects, error retention, and lack of real paired data for supervision. To address these challenges, we propose DeTac, a novel dual-branch generative framework that concurrently extracts clean shading and marker images from a single mixed tactile image. DeTac leverages full-image synthesis to naturally bypass mask dependency and introduces a cross-branch synergistic optimization that enables mutual supervision, effectively preventing error retention. Furthermore, we construct a strictly aligned, real-world paired tactile dataset using custom hardware to provide high-quality supervision. Extensive experiments demonstrate that DeTac achieves state-of-the-art decoupling accuracy, significantly facilitating downstream surface reconstruction and force estimation tasks while exhibiting cross-sensor generalization.

0.32

SoTa: Soft Tactile Skins for Dexterous Manipulation

cs.RO cs.LG ·2026-10-01 ·Jingyun Yang, Baiyu Shi, Timothy Yu, Haitian Liu, Alberta Longhini +4 more
code/data similarity 0.61
Abstract · The first three authors contributed equally. Project website: https://sota-skin.github.io

A growing body of work suggests that tactile sensing gives robot policies contact information that complements vision in dexterous manipulation. However, visuo-tactile robot data remains scarce: dexterous demonstrations require teleoperating robots, which limits dataset scale. Human demonstrations are far cheaper to collect and offer a path to scale this data, but only if human and robot hands carry tactile sensors with corresponding signals. This requires sensors that conform to different hand geometries, cover the full hand, and share a common layout across embodiments. We present SoTa, a low-cost capacitive tactile skin that provides full-hand coverage on humans and robots while preserving a shared layout of 202 taxels across corresponding finger and palm regions. Our multilayer design with fabric electrodes enables in-house fabrication of thin, soft skins with customizable geometry for under $10 in materials per skin. The sensor retains over 97% of its initial response span after 10,000 loading-unloading cycles with traces retaining continuity through 1,280 tight-fist folding cycles. The shared taxel layout supports human-robot co-training with a common tactile encoder and no learned cross-sensor mapping. Across three contact-rich manipulation tasks, tactile observations improve in-distribution success over vision-only policies. With a fixed robot demonstration budget, adding human demonstrations more than doubles mean success across eight evaluation conditions, from 22.8% to 45.9%, improving success in all five out-of-distribution conditions. We plan to open-source the resources needed to fabricate and operate these skins.

0.20