CS Paper Radar

A Unified Mamba--MoE Surrogate for Closed-Loop Simulation and Measurement-Window Forecasting of Inverter Transients

Haoguang Wang, Huy Hoang Le, Akhila Kandivalasa, Christian Moya, Marcos Netto, Guang Lin

cs.LG eess.SY ·submitted 2026-08-15 05:35 UTC · v1

Abstract

This paper proposes a Mamba surrogate model with mixture-of-experts (MoE) routing to represent the transient dynamics of inverter-based resources. A Mamba surrogate model is a predictive machine learning model built on the Mamba architecture. MoE routing uses a router network to assign data-dependent weights to specialized subnetworks (experts). The resulting Mamba--MoE surrogate can perform two tasks: (i) closed-loop simulation and (ii) measurement-window forecasting of inverter transients. A single Mamba backbone with task conditioning and expert routing serves both tasks, replacing two separate specialists. Task-matched objectives fit each prediction form, and an adaptive conformal layer provides prediction intervals for both tasks. For the considered grid-following inverter, the unified surrogate model remains in the same low-error regime as a Mamba specialist pair while using 13% fewer parameters. The prediction intervals achieve 94--96% empirical mean marginal coverage across the two tasks. For transient dynamics---that is, beyond the vicinity of an equilibrium point---our surrogate model with MoE routing yields lower errors across all outputs in both tasks compared to a shared Mamba backbone without expert routing. A controller hardware-in-the-loop simulation validates our results and shows that adapting only the shared output head with limited measured data reduces held-out forecasting error.

Closest papers

Nearest neighbours by meaning across the whole index.

Learning-Based Augmentation and Adaptation for Grid Sim-to-Real Model Discrepancy

eess.SY ·2026-09-18 ·Sayak Mukherjee, Kyung-Bin Kwon, Ramij R. Hossain, Marcelo Elizondo
benchmark similarity 0.61
Abstract · 12 pages, 5 figures, 3 tables

Modern power systems can encounter increased discrepancy between the operators' simulation model and the actual true dynamics of the grid, driven by uncertainties caused by integration of new inverter-based resources (IBRs), large loads, unmodeled dynamics, parameter drifts, etc., to name a few. All of these impact the control room operations, where some critical oscillations may not be captured during the transient studies. To circumvent these issues, we propose a learning-augmented hybrid approach where the operator simulation model is supplemented with artificial intelligence (AI)-learned residual models using the phasor measurement unit (PMU)/ point-on-wave (PoW) based sensed trajectory data. The physics-based operator model provides interpretability and structural consistency, while the learned residual captures discrepancies caused by non-idealities. The learned model employs advanced neural architectures and consists of a backbone encoder and multi-head decoder layers for heterogeneous grid channels. Subsequently, we formulated a continual learning-motivated adaptation framework such that the baseline residual AI model can also be updated when the underlying real grid model changes in future conditions. Extensive numerical simulations are performed on the IEEE 68-bus benchmark model with a diverse set of disturbances, and different state-of-the-art predictive architectures involving recurrent learners, latent neural ODEs, and transformers are explored to demonstrate both residual learning and adaptation capabilities.

0.28

IMPACT: Inverter-Informed Multimodal Learning for Photovoltaic Generation Forecasting

cs.LG cs.AI ·2026-10-29 ·Anushka Katiyar, Cong Feng, Jing Wang, Tristan Liu, Simon Julien +1 more
similarity 0.59
Abstract

This work develops a physics-informed multimodal deep learning framework for 10- to 110-minute-ahead probabilistic photovoltaic power forecasting. The forecasting model is built on a four-branch architecture that separately encodes plant-level temporal history and inverter-level spatial cloud dynamics through a graph attention encoder with a learned adjacency, known-future solar geometry, and the current meteorological state, fused through gated cross-attention. The geometry branch adds two forward-looking physical signals, spatial cloud heterogeneity and inverter ramp-down activity, each empirically weighted toward the horizon where it is most predictive. The decoder anchors its prediction to a smart persistence baseline, learning a horizon-conditioned correction, and the resulting quantile forecasts are calibrated online through a kernel-weighted adaptive conformal calibration step. The proposed model outperforms all 14 baselines, achieving a forecast skill score (FSS) of 0.2950, 0.099 above the next-best model. A branch-composition ablation shows that every branch contributes positively and the model retains substantial skill in challenging overcast and variable sky conditions (FSS 0.198 and 0.255).

0.10

Expanding the Transient Stability Region of Attraction of Networked Grid-Interactive Inverters: A Probabilistic Active Learning Framework

eess.SY ·2026-08-23 ·Zhong Liu, Jialin Zheng, Junjie Qin, Xiaonan Lu
benchmark similarity 0.59
Abstract

The continuous integration of inverter-based resources makes transient stability analysis increasingly important for power system modernization, in light of the intricate dynamics arising from large-scale inverter deployment. However, analytical transient stability analysis methods consistently yield overly conservative stability boundary estimates, which constrain grid dispatch and operational flexibility. Although recent neural Lyapunov methods attempt to enlarge these stability boundaries to obtain less conservative estimates, they remain trapped within restricted domains due to the out-of-distribution problem. To break this bottleneck, this paper proposes a probabilistic active learning framework. Starting from a deterministic inner stability region certified by neural Lyapunov functions, the framework constructs a Gaussian process surrogate and deploys an uncertainty-guided frontier search. By intelligently coupling electromagnetic transient simulations with active boundary exploration, the algorithm systematically drives the estimated stability boundary outward. Comprehensive evaluations across multi-machine grid-forming benchmarks demonstrate that the proposed framework substantially reduces estimation conservatism. Across test systems ranging up to four interconnected grid-forming inverters, the methodology achieves up to a $20$-fold volumetric enlargement of the certified stability region over classical baselines, while requiring at most 220 time-domain simulation queries per system, far fewer than the 1,600 queries that exhaustive EMT evaluation demands even for the simplest single-inverter benchmark.

0.30

Enhanced Imitation Learning of Model Predictive Control through Importance Weighting

eess.SY ·2026-11-04 ·Pere Izquierdo Gómez, Miguel E. López Gajardo, Nenad Mijatovic, Tomislav Dragicevic
top venuehighly cited similarity 0.56
Abstract

The approximation of model predictive control (MPC) algorithms with neural network models has received significant attention in the power electronics research community, as a valuable tool to enable the real-time implementation of computationally expensive methods. Training machine learning models to imitate MPC algorithms typically follows a traditional supervised learning flow, with a static training data set generated through either uniform sampling or simulation. Training with uniformly distributed data allows models to maintain consistent performance throughout the entire operating space, but very small models may fail to achieve satisfactory results in the regions corresponding to expected operation. Conversely, simulation data can be used in training to obtain models that can accurately track certain trajectories but fail to achieve adequate performance in underrepresented regions. The present article proposes a method to combine the advantages of both methods, by training models on sampled data with importance weights obtained through the kernel density estimation of experimental data. This allows the training process to target specific regions of the operating space, and results in measurable performance improvements. The method is demonstrated through the imitation of a moving discretized control set MPC algorithm for a dual active bridge converter, and is validated through experimental results.

0.70

State Transport Routing for Short-horizon Adaptation in Multi-horizon Photovoltaic Forecasting

cs.LG cs.AI ·2026-09-29 ·Xu Yuqing, Zhou Liguo, Sun Ze, Yu Lei, Jiang Mingming
similarity 0.56
Abstract

Recent power measurements provide valuable information for photovoltaic(PV) power forecasting, but directly extrapolating short-term trends can introduce substantial errors over longer forecast horizons. To address this challenge, we propose state transport routing (STR), a lightweight adapter that refines the predictions of a frozen forecasting model. STR combines the original forecast with two complementary trajectories derived from the latest measured power level and its recent trend. A horizon-conditioned router adjusts their contributions over the first 120 min, while leaving subsequent predictions unchanged. Experiments on four public PV datasets show that STR consistently outperforms a parameter-matched residual adapter. On PVDAQ, the same approach improves five neural forecasting backbones, reducing all-horizon normalized mean absolute error by 0.0201-0.2364 percentage points, with paired 95% confidence intervals excluding zero. No reliable improvement is observed for LightGBM. These findings demonstrate the potential of structured state adaptation to improve short-term forecasting across different neural architectures without retraining the underlying models or altering their longer-horizon predictions.

0.09

ACE: Adaptive Calibration-Free Expert Skipping for MoE-based LLMs

cs.AI ·2026-09-04 ·Zukang Xu, Zhixiong Zhao, Xing Hu, Jiangyong Yu, Houji Wen +3 more
similarity 0.55
Abstract

Mixture-of-Experts (MoE) architectures provide an efficient paradigm for scaling large language models (LLMs), yet fixed top-k routing activates the same number of expert slots for every token, causing substantial redundant computation. Existing expert-skipping methods often rely on router confidence, calibration data, or additional training, and therefore cannot reliably estimate the actual contribution of routed experts. To this end, we propose ACE, a training-free, calibration-free, and checkpoint-preserving framework for token-adaptive expert skipping in MoE-based LLMs. ACE contains two complementary components: 1) Global Spectral Proxy (GSP), which estimates global transformation capacity from the coupled gate, up, and down projections together with RMSNorm scaling; and 2) Router-Conditioned Refinement (RCR), which constructs expert-specific direction prototypes from centered router weights and evaluates expert responses along routing-preferred directions. During inference, ACE combines both estimates with runtime router gates and skips an expert slot only when both views identify it as low-contribution, while always retaining the top-1 expert. All expert statistics are computed offline, leaving only table lookups and lightweight scalar operations online. Extensive experiments across three MoE-based LLMs and eight benchmarks demonstrate that ACE consistently outperforms existing static and dynamic baselines, with increasingly pronounced advantages under aggressive expert skipping. For instance, at a 50% skipping ratio on Qwen3.6-35B-A3B, ACE reduces WikiText-2 perplexity by 7.96% and improves average downstream accuracy by 4.15 percentage points over the strongest competing method.

0.40

PowerModels-ACOPF-AI: On-the-Fly Machine Learning Approach for Solving AC Optimal Power Flow Integrating Renewable Energy Sources

eess.SY ·2026-09-16 ·Bhuban Dhamala, Jose Tabarez, Anup Pandey
benchmark similarity 0.55
Abstract

The increasing complexity of modern power systems, driven by high renewable penetration, load variability, and operational uncertainty, demands fast and reliable solutions to the AC optimal power flow problem (AC-OPF). Traditional optimization methods, though accurate, often struggle with scalability and high computational burdens, making them impractical for real-time use in large networks. This paper introduces PowerModels-ACOPF-AI, a two-stage Bayesian Neural Network (BNN) surrogate designed to predict generator set points, bus voltages, and phase angles with uncertainty. The framework integrates a performance-sensitive on-the-fly learning mechanism that identifies regions of degraded prediction accuracy and dynamically retrains with additional AC-OPF solutions generated by PowerModels.jl. This self-adaptive loop ensures robust performance, enabling the model to maintain accuracy under novel or highly variable operating conditions. Validation on benchmark test systems of different sizes, namely the 30-bus, 200-bus, and 500-bus networks, demonstrates strong generalization capability, efficient handling of stochastic renewable injections, and the ability to provide rapid, uncertainty-aware predictions. Beyond predictive accuracy, the proposed approach offers practical value as both a real-time advisory tool for system operators and a fast initializer for conventional solvers, thus supporting resilient and efficient grid operation in future power systems.

0.16

Infrastructure-Native Computing with Electric Power Grids

cs.ET eess.SY ·2026-10-06 ·Yubo Song, Subham Sahoo, Freja Basse
similarity 0.54
Abstract

Computing is conventionally implemented by hardware engineered for information processing. Here we investigate infrastructure-native computing: the use of a physical system built for another primary function as a fixed computational operator. In time-domain simulations of an IEEE 14-bus electrical network, Kirchhoff's current law and Ohm's law relate voltage-reference perturbations applied at distributed controllable nodes interfaced by power electronics converters to current responses through a topology-dependent transformation. A trained digital encoder and decoder exploit this transformation for image classification, reaching 91.5% accuracy on MNIST and 82.25% on Fashion-MNIST. The modeled operator is represented by 933 surrogate parameters, compared with 12,340 task-trained parameters for an accuracy-matched fully connected core transformation. Current superposition further supports concurrent spatial sharing of the operator and sequential temporal reuse, with per-stream accuracies above 85% and 93%, respectively, in surrogate-model evaluations. Evaluations on CIFAR-10 and repeated 10-class tasks sampled from a Butterflies-and-Moths dataset show that the incremental utility of the physical operator depends on the representation supplied by upstream digital feature extraction. These results provide a simulation-based proof of concept for infrastructure-native computing with electrical networks and identify topology, accessible control channels, and input representation as determinants of its computational utility.

0.16