CS Paper Radar

Infrastructure-Native Computing with Electric Power Grids

Yubo Song, Subham Sahoo, Freja Basse

cs.ET eess.SY ·submitted 2026-10-06 14:10 UTC · v1

Abstract

Computing is conventionally implemented by hardware engineered for information processing. Here we investigate infrastructure-native computing: the use of a physical system built for another primary function as a fixed computational operator. In time-domain simulations of an IEEE 14-bus electrical network, Kirchhoff's current law and Ohm's law relate voltage-reference perturbations applied at distributed controllable nodes interfaced by power electronics converters to current responses through a topology-dependent transformation. A trained digital encoder and decoder exploit this transformation for image classification, reaching 91.5% accuracy on MNIST and 82.25% on Fashion-MNIST. The modeled operator is represented by 933 surrogate parameters, compared with 12,340 task-trained parameters for an accuracy-matched fully connected core transformation. Current superposition further supports concurrent spatial sharing of the operator and sequential temporal reuse, with per-stream accuracies above 85% and 93%, respectively, in surrogate-model evaluations. Evaluations on CIFAR-10 and repeated 10-class tasks sampled from a Butterflies-and-Moths dataset show that the incremental utility of the physical operator depends on the representation supplied by upstream digital feature extraction. These results provide a simulation-based proof of concept for infrastructure-native computing with electrical networks and identify topology, accessible control channels, and input representation as determinants of its computational utility.

Closest papers

Nearest neighbours by meaning across the whole index.

A unified power-grid representation for reuse across network structures and computational tasks

eess.SY ·2026-09-07 ·Yanhao Huang, Changqing Liu, Zichang Wang, Qianhong Wu
similarity 0.67
Abstract

Data-driven power-system models are typically developed for specific grids and computational tasks, but their performance can deteriorate markedly or even fail when network structures or analytical objectives change. This paper develops a unified grid representation that separates physical-grid description from downstream computation. A self-supervised encoder represents each grid as a variable number of fixed-dimensional node, branch and global vectors under a common latent description. Although pretrained only on systems with at most 270 buses, the frozen encoder transfers without adaptation to a 70,000-bus network, more than 250 times larger in bus count, while preserving 0.7919 bus-correspondence accuracy. The same representation supports four independently trained downstream tasks: power-flow calculation, reactive-power adjustment, operating-condition generation and transient-stability assessment. On the previously unseen 70,000-bus grid, power-flow calculation achieves mean errors of 0.108$^{\circ}$ in phase angle and 3.8$\times$10\textsuperscript{-6} p.u. in voltage magnitude. Reactive-power adjustment achieved a 75\% PSASP-verified correction rate on the previously unseen 70,000-bus grid, while operating-condition generation delivered at least one PSASP-verified feasible state for 82.2\% of requests on previously unseen 400--1,000-bus grid families. For transient-stability assessment, the frozen encoder achieves accuracy within 0.8 percentage points of full encoder adaptation under matched training conditions. These results demonstrate that a unified power-grid representation can be learned once and reused unchanged across structurally different power systems and heterogeneous computational tasks.

0.49

Mycelium: A Generalizable Cross-Grid Multi-Task Model for Electrical Distribution Systems

cs.LG ·2026-09-27 ·Zhengyang Wei, Shourya Bose, Helgi Hilmarsson, Elena Carnio, Dhruv Suri
benchmark similarity 0.63
Abstract

Electrical distribution grid operations require inference across heterogeneous networks from sparse, noisy, and incomplete time series measurements. In this work, we identify challenges and explore solutions towards a unified model that can perform diverse tasks grounded in the physics of the electric grid and generalize to unseen distribution networks. We define a unified grid ontology that represents variable sized distribution networks as heterogeneous graphs while preserving native topology, asset types, and electrical relationships across networks. We develop a physics based data simulation pipeline that combines reference and procedurally generated distribution networks with network reconfigurations, fault scenarios, and configurable sensing conditions. We present Mycelium, a heterogeneous graph transformer with structure aware communication edges and electrical reference features that encode network position and nominal phase orientation, together with task specific temporal readouts which generate per task outputs. We train Mycelium on reference as well as synthetic grids, and study its generalization on benchmark networks completely excluded from training and validation. Mycelium is observed to outperform task specific neural baselines on most reported benchmark metrics. Architectural ablations and the aforementioned studies reveal Mycelium's capability to learn representations of the underlying physics which serves to enhance cross-task performance, thereby addressing a significant challenge in unified grid models.

0.26

Learning-Based Augmentation and Adaptation for Grid Sim-to-Real Model Discrepancy

eess.SY ·2026-09-18 ·Sayak Mukherjee, Kyung-Bin Kwon, Ramij R. Hossain, Marcelo Elizondo
benchmark similarity 0.60
Abstract · 12 pages, 5 figures, 3 tables

Modern power systems can encounter increased discrepancy between the operators' simulation model and the actual true dynamics of the grid, driven by uncertainties caused by integration of new inverter-based resources (IBRs), large loads, unmodeled dynamics, parameter drifts, etc., to name a few. All of these impact the control room operations, where some critical oscillations may not be captured during the transient studies. To circumvent these issues, we propose a learning-augmented hybrid approach where the operator simulation model is supplemented with artificial intelligence (AI)-learned residual models using the phasor measurement unit (PMU)/ point-on-wave (PoW) based sensed trajectory data. The physics-based operator model provides interpretability and structural consistency, while the learned residual captures discrepancies caused by non-idealities. The learned model employs advanced neural architectures and consists of a backbone encoder and multi-head decoder layers for heterogeneous grid channels. Subsequently, we formulated a continual learning-motivated adaptation framework such that the baseline residual AI model can also be updated when the underlying real grid model changes in future conditions. Extensive numerical simulations are performed on the IEEE 68-bus benchmark model with a diverse set of disturbances, and different state-of-the-art predictive architectures involving recurrent learners, latent neural ODEs, and transformers are explored to demonstrate both residual learning and adaptation capabilities.

0.28

Physics-Aware Distillation of a Grid Foundation Model for Real-Time Edge Inference

cs.LG ·2026-10-15 ·Vlad Alexandru Sănduleac, Shahariya Rasheed Rayamarakkarveettil Puthanpurayil, Noman Khan, Remus Teodorescu
benchmark similarity 0.58
Abstract

Grid foundation models (GridFMs) are graph transformers pretrained on a masked power-flow objective, and evaluate power flow orders of magnitude faster than an iterative solver. Their size, however, targets data-centre inference, whereas low-inertia operation increasingly asks for inference at the edge, next to the measurement, at batch size one and within a single synchrophasor (PMU) reporting frame. We distil a 20.1M-parameter, 12-layer GridFM teacher into a 0.62M-parameter, 6-layer student, a $32.5\times$ parameter reduction at half the message-passing depth, using an objective that combines the masked power-flow loss with output, physics-residual, latent-state and attention transfer. The physics-residual term, which matches the teacher's power-residual profile, has not previously been applied to typed power-grid graphs. We evaluate on a renewable variant of the IEEE 118-bus benchmark grid in which 26 of the conventional (synchronous) generators are replaced by inverter-based renewables with battery flexibility and standardised reactive-power limits (IEEE 1547), giving $97\,529$ physically valid (AC-OPF-feasible) operating scenarios, and we ablate all eight combinations of the transfer terms, reporting accuracy against ground truth and fidelity to the teacher separately. Distillation lowers student error on all four predicted quantities, by up to $48\%$ on active-power dispatch, and every distilled student is more accurate than its teacher on reactive-power dispatch. The gain is largely carried by the output matching term. The physics-residual term, in the layer-aggregated form used here, is consistently harmful, which we attribute to the spatial averaging it applies to a bus-level residual field. The resulting student is $32.5\times$ smaller in parameter count and has half the message-passing depth, making it a candidate for subsequent edge-device benchmarking.

0.40

Extending Grid Foundation Models for Phasor-Domain Dynamic Simulation

eess.SY cs.LG ·2026-11-06 ·Boyang Zhao, Yifan Zhou, Alban Puech, Tilman Bockhacker, Hendrik Hamann
similarity 0.57
Abstract

Grid Foundation Models (GridFMs) are emerging as a powerful framework for learning and transferring knowledge across power grids and grid analysis tasks. This work extends GridFMs from steady-state analysis to dynamic simulation. We present DynGridFM, which uses component-wise tokenization and a structured latent operator to learn shared dynamic representations across heterogeneous grids and enable transfer to unseen systems. Pretrained on nine grids, DynGridFM is adapted to a held-out 48-machine grid, where fine-tuning on 64 trajectories achieves accuracy comparable to training from scratch on 128. On a single GPU, it achieves 924x to 1232x speedup over numerical simulators on one CPU core.

0.26

Toward Out-of-Distribution Generalization in Neural AC Power Flow

cs.LG cs.AI ·2026-11-18 ·Ojas Sanghi, Anvita Bhagavathula, Alvaro Carbonero, Priya L. Donti
published similarity 0.56
Abstract · 11 pages, 5 figures. Accepted as an oral presentation at the NeurIPS 2026 Workshop on AI Foundations for Power Grids: From Models to Deploym…

Growing uncertainty in power system operations from renewables integration, extreme weather, and data center loads challenges the reliability of traditional power flow solvers at scale. Machine learning-based proxies are a potentially promising alternative, but the prohibitive cost of generating training data for large grids makes out-of-distribution generalization a key capability for deployment; currently, models trained on small grids lack that capability. In this work, we systematically evaluate how physics-informed losses, multi-grid training, and perturbation-based data augmentation improve the zero-shot transfer of three graph neural network-based power flow models from smaller systems to a larger, unseen 500-bus system. We find that (1) physics-informed losses improve transfer relative to purely supervised objectives; (2) multi-grid training on smaller systems matches the best single grid but does not close the gap to target-grid training; (3) perturbation-based augmentation on edge attributes improves transfer by up to 54.6%; and (4) random line/generator dropout does not consistently improve performance.

0.40

The Grid's Own Language: A Common Information Model Layer for LLM Grid Assistants

eess.SY ·2026-11-15 ·Antonio Alcántara, Ioannis Karampinis, Spyros Chatzivasileiadis
positioncode/data similarity 0.56
Abstract

Assistants built on large language models (LLMs) are entering power system operation. Current designs delegate computations to validated solvers, but the agent still infers the type, role and state of each element from its name and tool-specific formats, and errors propagate to every study. The Common Information Model (CIM), the IEC standard in which operators already exchange network models, defines unambiguously what each element is and how it connects. We propose a CIM layer for LLM grid assistants and implement it in CONDUCTOR, an open-source assistant. Both the agent and its power-system studies read the layer. It labels the provenance of each fact (stated in the data, suggested only by a name, or inferred from topology), loads operators' CGMES models directly, and builds in $\leq$1\,s on the 9,241-bus PEGASE network. Deterministic checks compare every answer with solver results and the layer. On 37 tasks about the CIGRE medium-voltage and IEEE 30-bus networks, the agent gets right 97\,\% of the graded facts with the layer, such as a unit's energy source or a switch's normal state, against 55\,\% without it. We argue that a CIM layer should be a default component of grid assistants.

0.37

Robust Industrial Cyber Physical Classification Using Neuromorphic Temporal Embeddings and Hybrid SNN XGBoost Under Machine Unlearning Attacks

cs.LG cs.CRcs.NE ·2026-09-09 ·Ammar Kamoona, Sajad Koushkbaghi, Mahdi Jalili, Peter McTaggart, Xinghuo Yu
similarity 0.56
Abstract · 13 pages, first draft

The digitalisation of electrical distribution networks has increased the exposure of power-grid infrastructure to cyber attacks. Existing intrusion detection systems (IDSs), however, often rely on computationally expensive deep learning models that are difficult to deploy at the edge. Periodic retraining also exposes these systems to machine unlearning attacks, where selective data removal can degrade detection performance. We propose a hybrid Spiking Neural Network (SNN) and XGBoost architecture that combines efficient temporal encoding with a lightweight classifier and provides structural resilience to such attacks. The SNN is trained once on clean data and used as a fixed feature extractor, while only the XGBoost classifier is retrained during model updates. Evaluated on two real-world public power-system datasets, the proposed method achieves 99.9\% accuracy (F1-macro 0.999) on the Synchrophasor dataset and 95.0\% accuracy (F1-macro 0.943) on the MSU/ORNL dataset, outperforming standalone baselines. Under selective label-flipping attacks, the hybrid model loses only 0.9\% F1-macro at 10\% poisoning and delays target-class collapse from 60\% to 70\% poisoning compared with raw models. These results demonstrate that neuromorphic temporal encoding can provide both accurate cyber-attack detection and improved resilience to data poisoning in cyber-physical systems.

0.47