CS Paper Radar

A unified power-grid representation for reuse across network structures and computational tasks

Yanhao Huang, Changqing Liu, Zichang Wang, Qianhong Wu

eess.SY ·submitted 2026-09-07 15:39 UTC · v1

Abstract

Data-driven power-system models are typically developed for specific grids and computational tasks, but their performance can deteriorate markedly or even fail when network structures or analytical objectives change. This paper develops a unified grid representation that separates physical-grid description from downstream computation. A self-supervised encoder represents each grid as a variable number of fixed-dimensional node, branch and global vectors under a common latent description. Although pretrained only on systems with at most 270 buses, the frozen encoder transfers without adaptation to a 70,000-bus network, more than 250 times larger in bus count, while preserving 0.7919 bus-correspondence accuracy. The same representation supports four independently trained downstream tasks: power-flow calculation, reactive-power adjustment, operating-condition generation and transient-stability assessment. On the previously unseen 70,000-bus grid, power-flow calculation achieves mean errors of 0.108$^{\circ}$ in phase angle and 3.8$\times$10\textsuperscript{-6} p.u. in voltage magnitude. Reactive-power adjustment achieved a 75\% PSASP-verified correction rate on the previously unseen 70,000-bus grid, while operating-condition generation delivered at least one PSASP-verified feasible state for 82.2\% of requests on previously unseen 400--1,000-bus grid families. For transient-stability assessment, the frozen encoder achieves accuracy within 0.8 percentage points of full encoder adaptation under matched training conditions. These results demonstrate that a unified power-grid representation can be learned once and reused unchanged across structurally different power systems and heterogeneous computational tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

Graph-Based Dynamic Activity Prediction for Real-Time Power System Applications

eess.SY ·2026-11-03 ·Stefanos Eleftheriadis, Mohammad Hashemnezhad, Savvas Panagi, Thibaut Vermeulen, Petros Aristidou
similarity 0.67
Abstract

Online dynamic security assessment and day-ahead planning require rapid identification of where disturbances will produce significant dynamic activity. Full time-domain simulations are computationally demanding, while existing machine-learning approaches predict system-level outcomes or require post-disturbance trajectories. This paper proposes a pair-aware Graph Isomorphism Network with Edge features (GINE) framework comprising two task-specific models for predicting bus-voltage and generator apparent-power activity from the operating point and contingency description. Physically aware KPI cuts convert simulated responses into ordinal activity targets for model training. Evaluations on Nordic 32 and the French transmission system with more than 6 000 buses show that pair-aware fusion and graph embeddings improve on a local baseline on Nordic 32, with GINE the lower-cost graph encoder, and that the framework remains effective at large scale. As a downstream application, the predicted activity maps guide Adaptive Model Simplification, reducing continuous and discrete model variables by 72% and 66%, achieving speedups of up to 3.16x, and preserving voltage trajectories when critical substations are retained. These results demonstrate scalable, pre-disturbance prediction of component-level dynamic activity.

0.29

Infrastructure-Native Computing with Electric Power Grids

cs.ET eess.SY ·2026-10-06 ·Yubo Song, Subham Sahoo, Freja Basse
similarity 0.67
Abstract

Computing is conventionally implemented by hardware engineered for information processing. Here we investigate infrastructure-native computing: the use of a physical system built for another primary function as a fixed computational operator. In time-domain simulations of an IEEE 14-bus electrical network, Kirchhoff's current law and Ohm's law relate voltage-reference perturbations applied at distributed controllable nodes interfaced by power electronics converters to current responses through a topology-dependent transformation. A trained digital encoder and decoder exploit this transformation for image classification, reaching 91.5% accuracy on MNIST and 82.25% on Fashion-MNIST. The modeled operator is represented by 933 surrogate parameters, compared with 12,340 task-trained parameters for an accuracy-matched fully connected core transformation. Current superposition further supports concurrent spatial sharing of the operator and sequential temporal reuse, with per-stream accuracies above 85% and 93%, respectively, in surrogate-model evaluations. Evaluations on CIFAR-10 and repeated 10-class tasks sampled from a Butterflies-and-Moths dataset show that the incremental utility of the physical operator depends on the representation supplied by upstream digital feature extraction. These results provide a simulation-based proof of concept for infrastructure-native computing with electrical networks and identify topology, accessible control channels, and input representation as determinants of its computational utility.

0.16

Towards Efficient Edge AI for Power Flow in Renewable-Rich Grids with Volt/VAR Control

eess.SY ·2026-11-11 ·Shahariya R. R. Puthanpurayil, Vlad A. Sanduleac, Remus Teodorescu
code/data similarity 0.66
Abstract

AI models of the power grid must capture how wind and solar plants support the voltage, adjusting their reactive power to the local voltage along a grid-code Q(V) characteristic. This research examines whether grid foundation models, fast neural network models for power-flow analysis, can represent this behaviour. We introduce the Q(V) bus, a new bus type for the open-source GridFM GraphKit, whose physics decoder evaluates the reactive injection from the plant characteristic at the predicted voltage in every correction step. Training data comprise 7882 hourly operating points of a modified IEEE 118-bus system, matched to Energinet DK1/DK2 measurements and solved with pandapower. Compared with a physics-informed baseline that represents the parks as negative load, the Q(V) bus lowers the voltage-magnitude RMSE 2.3-fold, reduces the power-balance mismatch at the parks from 25 to 0.66 MVA, and raises the F1 score for voltage-band violations from 0.40 to 0.76. An ablation over five configurations shows that the Q(V) bus type provides the accuracy and the physics loss provides the power balance. For edge monitoring, we distil the trained $2.0\times10^{7}$-parameter model into students of $6\times10^{5}$ and $1.3\times10^{6}$ parameters; a flat-start initialisation prevents their collapse into an incorrect low-voltage state in which the characteristic saturates. With output distillation, the 12-step student reaches 1.4 times the teacher's error and, for edge inference on an NVIDIA Jetson Orin Nano (15 W), solves an hourly scenario in 12.2 ms, within the 20 ms synchrophasor interval.

0.34

Physics-Informed but Not Physics-Consistent: Error Geometry and Subspace Projection for Neural AC Power Flow

cs.LG cs.AI ·2026-10-05 ·Changhun Kim, Timon Conrad, Redwanul Karim, Karan Pahlajani, Julian Oelhaf +5 more
code/data similarity 0.64
Abstract · ICASSP 2027 submitted; 3 figures, 3 tables. Code: https://github.com/Kimchangheon/neural-acpf-error-geometry

Recent neural power-flow solvers, including emerging foundation models, achieve accurate voltage predictions, yet such accuracy does not necessarily imply physically consistent solutions. Even small complex voltage errors can yield large AC power-balance residuals. We study this accuracy-consistency gap across PIGNN-GC, GridSFM, gridfm-graphkit, and LUMINA on realistic 2224-bus Great Britain network (GBnetwork) scenarios, with cross-grid evaluation of GridSFM over 31 systems. Using a singular value decomposition (SVD) basis fitted to training AC power-flow solutions, we find that neural prediction errors contain substantial components outside the dominant solution subspace. To address this mismatch, calibrated solution-subspace projection (CSP) suppresses off-subspace prediction components after train-only bias calibration, reducing Mean PB by 67.0%, 37.8%, 40.5%, and 68.9% for PIGNN-GC, GridSFM, gridfm-graphkit, and LUMINA, respectively, relative to calibrated predictions, while improving voltage-magnitude accuracy in all four models. These results identify output-error geometry as an important factor in physics-consistent neural AC power flow. Code: https://github.com/Kimchangheon/neural-acpf-error-geometry

0.34

Toward Out-of-Distribution Generalization in Neural AC Power Flow

cs.LG cs.AI ·2026-11-18 ·Ojas Sanghi, Anvita Bhagavathula, Alvaro Carbonero, Priya L. Donti
published similarity 0.64
Abstract · 11 pages, 5 figures. Accepted as an oral presentation at the NeurIPS 2026 Workshop on AI Foundations for Power Grids: From Models to Deploym…

Growing uncertainty in power system operations from renewables integration, extreme weather, and data center loads challenges the reliability of traditional power flow solvers at scale. Machine learning-based proxies are a potentially promising alternative, but the prohibitive cost of generating training data for large grids makes out-of-distribution generalization a key capability for deployment; currently, models trained on small grids lack that capability. In this work, we systematically evaluate how physics-informed losses, multi-grid training, and perturbation-based data augmentation improve the zero-shot transfer of three graph neural network-based power flow models from smaller systems to a larger, unseen 500-bus system. We find that (1) physics-informed losses improve transfer relative to purely supervised objectives; (2) multi-grid training on smaller systems matches the best single grid but does not close the gap to target-grid training; (3) perturbation-based augmentation on edge attributes improves transfer by up to 54.6%; and (4) random line/generator dropout does not consistently improve performance.

0.40

Benchmarking Graph Neural Networks for AC Power Flow: The Role of Inductive Biases and Physical Constraints

cs.LG cs.AI ·2026-10-28 ·Federico Clerici, Ferran Bohigas-Daranas, Hamid Latif-Martínez, Eduardo Prieto-Araujo, Oriol Gomis-Bellmunt +1 more
benchmark similarity 0.64
Abstract

Fast and accurate models for AC power flow (ACPF) are increasingly important as modern electrical grids require more frequent system analyses. Graph neural networks (GNNs) naturally exploit electrical grid topology, yet the effects of architectural design choices on predictive performance remain poorly understood given differences in graph representations and evaluation settings across studies. We present a unified benchmark of representative GNN architectures for ACPF prediction under a common experimental framework. All models use identical preprocessing and training procedures and comparable parameter budgets, isolating the impact of message-passing mechanisms and inductive biases. We also analyze errors by distance from the slack bus and systematically ablate key design components. We evaluate predictive accuracy and physical consistency on the IEEE 14-bus and IEEE 118-bus systems. Results indicate that anisotropic message-passing architectures offer the most favorable trade-off between predictive accuracy and physical consistency under the studied parameter and topology constraints. Explicit edge features encoding line impedances and global context aggregation are particularly important for representing electrical interactions and system-wide dependencies, especially for voltage-angle predictions on the topologically bottlenecked IEEE-118 grid. Under a budget with approximately fixed parameters, two or three message-passing layers generally provide the best balance between depth and representation width, while additional depth offers no consistent improvement. Ablations also show that standard residual and root connections are not necessarily beneficial in shallow models, and that aggregation operators involve trade-offs between statistical accuracy and physical consistency. These results provide practical guidelines for designing graph-based power system models.

0.17

Physics-Aware Distillation of a Grid Foundation Model for Real-Time Edge Inference

cs.LG ·2026-10-15 ·Vlad Alexandru Sănduleac, Shahariya Rasheed Rayamarakkarveettil Puthanpurayil, Noman Khan, Remus Teodorescu
benchmark similarity 0.63
Abstract

Grid foundation models (GridFMs) are graph transformers pretrained on a masked power-flow objective, and evaluate power flow orders of magnitude faster than an iterative solver. Their size, however, targets data-centre inference, whereas low-inertia operation increasingly asks for inference at the edge, next to the measurement, at batch size one and within a single synchrophasor (PMU) reporting frame. We distil a 20.1M-parameter, 12-layer GridFM teacher into a 0.62M-parameter, 6-layer student, a $32.5\times$ parameter reduction at half the message-passing depth, using an objective that combines the masked power-flow loss with output, physics-residual, latent-state and attention transfer. The physics-residual term, which matches the teacher's power-residual profile, has not previously been applied to typed power-grid graphs. We evaluate on a renewable variant of the IEEE 118-bus benchmark grid in which 26 of the conventional (synchronous) generators are replaced by inverter-based renewables with battery flexibility and standardised reactive-power limits (IEEE 1547), giving $97\,529$ physically valid (AC-OPF-feasible) operating scenarios, and we ablate all eight combinations of the transfer terms, reporting accuracy against ground truth and fidelity to the teacher separately. Distillation lowers student error on all four predicted quantities, by up to $48\%$ on active-power dispatch, and every distilled student is more accurate than its teacher on reactive-power dispatch. The gain is largely carried by the output matching term. The physics-residual term, in the layer-aggregated form used here, is consistently harmful, which we attribute to the spatial averaging it applies to a bus-level residual field. The resulting student is $32.5\times$ smaller in parameter count and has half the message-passing depth, making it a candidate for subsequent edge-device benchmarking.

0.40

Mycelium: A Generalizable Cross-Grid Multi-Task Model for Electrical Distribution Systems

cs.LG ·2026-09-27 ·Zhengyang Wei, Shourya Bose, Helgi Hilmarsson, Elena Carnio, Dhruv Suri
benchmark similarity 0.63
Abstract

Electrical distribution grid operations require inference across heterogeneous networks from sparse, noisy, and incomplete time series measurements. In this work, we identify challenges and explore solutions towards a unified model that can perform diverse tasks grounded in the physics of the electric grid and generalize to unseen distribution networks. We define a unified grid ontology that represents variable sized distribution networks as heterogeneous graphs while preserving native topology, asset types, and electrical relationships across networks. We develop a physics based data simulation pipeline that combines reference and procedurally generated distribution networks with network reconfigurations, fault scenarios, and configurable sensing conditions. We present Mycelium, a heterogeneous graph transformer with structure aware communication edges and electrical reference features that encode network position and nominal phase orientation, together with task specific temporal readouts which generate per task outputs. We train Mycelium on reference as well as synthetic grids, and study its generalization on benchmark networks completely excluded from training and validation. Mycelium is observed to outperform task specific neural baselines on most reported benchmark metrics. Architectural ablations and the aforementioned studies reveal Mycelium's capability to learn representations of the underlying physics which serves to enhance cross-task performance, thereby addressing a significant challenge in unified grid models.

0.26