CS Paper Radar

Contact Modes Are Strata: What Geometric Structure Buys in Discrete-Continuous Planning

Phone Thiha Kyaw, Jonathan Kelly

cs.RO ·submitted 2026-08-16 05:28 UTC · v2
published

Abstract

Contact-rich manipulation poses a discrete question and a continuous one at once, namely which contacts are active and how to move while they hold. The two are coupled by a change of dimension, since each contact that a robot maintains confines its motion to a lower-dimensional manifold. We make that coupling the explicit object of planning by observing that a contact mode is not merely analogous to a stratum of the configuration space; it is one. A plan is then a walk over strata whose within-stratum segments are geodesics. On two contact-rich manipulation tasks in simulation, pushing a T-shaped block around obstacles and reorienting a cube in a dexterous hand, our planner returns solutions within seconds with no mode, contact sequence, or stratum given in advance.

Comment
Spotlight paper at the IROS 2026 Workshop on Geometric-Aware Representations in Robotics, Pittsburgh, USA, October 1, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Manipulation Feasible Navigation Among Movable Obstacles with Discrete Contact Pushing

cs.RO ·2026-09-20 ·Shaohu Wang, Aiguo Song, Yulong Yuan, Zhongyu Sun, Tianyuan Miao +1 more
code/datahot direction similarity 0.65
Abstract

In environments with large movable obstacles, detour-only navigation can be inefficient or even infeasible, while obstacle interaction requires reasoning about navigation benefit, feasible placement, and executable manipulation. We present a hierarchical navigation among movable obstacles (NAMO) framework for mobile manipulators. At the high level, the planner identifies key blocking obstacles from reference paths and searches for relocation plans that jointly satisfy geometric, manipulation, and downstream navigation constraints. When direct relocation is hindered by other movable objects, a large language model (LLM) is selectively invoked to infer auxiliary manipulation dependencies, which are then verified by deterministic geometric planning. To execute the resulting relocation goals, we define discrete contact modes on the surfaces of box-shaped obstacles and select contact faces and regions online based on position and orientation errors, enabling straight, side, and corner pushing through contact switching. A recurrent reinforcement-learning policy coordinates the mobile base and manipulator to track tool center point (TCP) targets while preserving end-effector reachability during sustained pushing. Simulation and real-robot experiments demonstrate feasible navigation-manipulation in detour, single- and multi-obstacle relocation, and dependency-constrained scenarios, validating the framework for interactive navigation with large non-graspable obstacles. The open-source project is available at https://cloudytosunny.github.io/NAMO_DCPushing/.

0.37

Contact-Implicit Stein Projected ADMM for Discovery of Diverse Contact-Rich Manipulation Strategies

cs.RO ·2026-09-23 ·Hrishikesh Sathyanarayan, Christian Hughes, Ian Abraham
hot direction similarity 0.65
Abstract

Contact-implicit trajectory optimization formulates contact-rich manipulation as a single constrained program; however, that single program run collapses onto one local optimum out of many equally valid contact modes, grasps, or push directions. As a consequence, the resulting manipulation strategy is reluctant to change and sensitive to initialization. In order to promote robust manipulation, this paper investigates how contact-implicit solvers can discover diverse contact-rich strategies. Our approach derives a variation of Consensus Alternating Direction Method of Multipliers (ADMM) combined with Stein variational inference methods to output a set of distinct contact-rich solutions. We find that applying the Stein repulsive force to ADMM's split variable (rather than its primal form) allows for effective coverage over the set of feasible contact strategies without prematurely stalling the solver. We demonstrate the effectiveness of our approach on a variety of contact-rich manipulation tasks, including pushing, grasping, and multi-robot handover. Last, we find the proposed solver is simpler in form and capable of discovering unique contact modes when compared with existing solvers. Videos and code with examples are found in https://anon-website-submission.github.io/stein-admm-website/.

0.39

Contact-Rich Motion Planning via GPU-Parallel Mode Evaluation

cs.RO ·2026-09-18 ·Jiayun Li, Georgia Chalvatzaki
similarity 0.65
Abstract

Contact-rich motion planning (CRMP) is essential for robotic manipulation and locomotion, yet remains computationally challenging due to combinatorial contact decisions. Existing methods typically avoid broad evaluation of contact-mode sequences through search heuristics or optimization reformulations. We revisit broad evaluation in light of modern GPU hardware and introduce Contact-Mode Expansion with parallel Trajectory optimization (CoMET), which combines GPU-parallel trajectory evaluation with greedy contact-mode expansion. On planar pushing benchmarks, CoMET is competitive with optimization-based, sampling, and tree-search baselines in solution quality and planning time, matching the full-enumeration reference on nearly all instances with fewer evaluations and shorter planning times. Ablations suggest that much of the performance gain comes from the high-throughput trajectory evaluator. In bimanual nonprehensile manipulation, GPU-friendly local mode expansion achieves higher planning success than the tested adaptive tree search as the mode space grows. These results demonstrate that broad explicit mode evaluation provides a simple yet effective alternative for CRMP.

0.25

One Demonstration, Many Objects: Generalizing Manipulation via Local Contact Geometry

cs.RO ·2026-09-01 ·Satvik Sharma, Samrat Sahoo, Huang Huang, Fei-Fei Li, Jiajun Wu +2 more
highly cited similarity 0.64
Abstract

Dexterous manipulation with multi-fingered robot hands promises human-level dexterity, but collecting large-scale dexterous robot hand data remains difficult. Learning from human demonstrations has emerged as a scalable alternative to robot teleoperation, providing strong priors on object interaction and contact strategies. Recent sim-to-real RL methods incorporate such priors, but often (i) omit rewards that explicitly incentivize precise contact, yielding weak real-world performance, and/or (ii) generalize poorly to unseen object instances. We propose DemoMimic (Dexterous Motion Mimic), a policy that manipulates objects by focusing on their geometry local to the contact points. Its contact-centric rewards encourage precise contact and improve sim-to-real consistency, yielding a single real-world policy that transfers across objects of varying shape, scale, mass, and friction wherever local contact structure is preserved. Real-world ablations show that DemoMimic achieves 71% success across 16 objects, four tasks, and two robot-hand embodiments, with the smallest sim-to-real drop compared to baselines.

0.36

Grasping by interconnection: robust closing motions from coarse object templates

cs.RO ·2026-09-16 ·Julien Vanderheyden, Guillaume Drion, Fulvio Forni, Pierre Sacré
similarity 0.63
Abstract

Dexterous robot hands must often grasp objects whose shape, size, and pose are known only approximately. Grasp planners typically require accurate object models or correct errors with feedback, but how much inaccuracy a closing motion can tolerate on its own remains unclear. To address this question, we designed a motion planner based on four principles: a coarse template of the object, human grasp types, an object-centric interaction, and compliant, sliding contacts instead of prescribed contact points. This paper presents the planner, implemented through virtual model control, and its evaluation on a Shadow Dexterous Hand. Without feedback, the planned closing motions tolerated size errors of about 1cm and pose errors of several centimeters and tens of degrees, a wider range than a state-of-the-art data-driven planner in 25 of 27 tested conditions. They also grasped 82.5% of 80 everyday objects and succeeded within an autonomous pipeline. Robustness can thus be designed into the closing motion itself, rather than left only to feedback. This planner opens a path toward reliable manipulation in uncertain settings, which we will pursue by combining it with adaptive feedback control on the physical hand.

0.45

Receding-Horizon Pushing with Composable Object-Centric Policies

cs.RO ·2026-09-20 ·Zhiyi Yuan, Tianrun Hu, Anxing Xiao, Yuhong Deng, David Hsu +1 more
similarity 0.63
Abstract

Non-prehensile manipulation is practical for relocating large, heavy, or geometrically ungraspable objects. Yet, long-horizon pushing of arbitrarily-shaped 3D objects couples three problems: 1) where to push the object so as to approach the target pose, 2) whether each push is stable and reachable, 3) whether subsequent actions remain feasible. We present an object-centric pushing policy within a feedback-guided hierarchical framework. At the low level, a learning-based policy predicts contact actions from a pose- and scale-normalized point cloud, conditioned on a near single-step subgoal. A stability score is applied to evaluate the predicted contacts by a quasi-static sliding-versus-tipping analysis. At the high level, BIT$^*$ first searches for an object path, and the next several subgoals are checked by contact prediction and robot motion planning for future feasibility. Failed motion plans, as feedback, change the local path costs and trigger re-planning. During execution, only the first feasible action is executed. In simulation, we evaluate 22 objects in six different scenes, upon which we also conduct comprehensive ablation studies. Results demonstrate that our method outperforms baselines with a clear margin and can reliably achieve long-horizon object pushing tasks under different situations. We also report quantitative real-robot experiments with a Franka arm and qualitative demonstrations with a mobile manipulator for large and heavy objects, with directly zero-shot sim-to-real transfer.

0.26

CRISP: Contact-Rich Robotic Simulation Platform with Extensive Geometries and Contact Solvers

cs.RO ·2026-09-18 ·Somang Lee, Sunkyung Park, Jinhee Yun, Seoki An, Dongjun Lee
code/data similarity 0.63
Abstract · 12 pages, 8 figures. Project website: https://inrol.github.io/crisp/

We present CRISP (Contact-RIch Simulation Platform), a high-fidelity physics engine tailored for complex multi-contact simulations such as tight-tolerance robotic manipulation. Achieving high physical fidelity in robotic simulation requires both expressive modeling of geometry and contact interactions, as well as accurate numerical resolution via robust collision detection and contact solvers. However, existing simulators often either rely on limited support for geometric representations and simplified modeling of contact interactions, or employ numerical resolution methods whose accuracy or robustness is inherently constrained. Accordingly, we develop a new simulator that supports diverse geometric representations with accurate optimization-based collision detection, and combines contact modeling with robust augmented Lagrangian-based contact solvers. This integration enables efficient and consistent detection of contact information across complex geometries while accurately resolving multi-contact constraints without problematic relaxations, which is essential for simulating contact-intensive and sharp interactions. We validate the physical fidelity of our simulator against state-of-the-art platforms and further demonstrate its capabilities through complex robotic manipulation scenarios. CRISP is publicly available at https://github.com/INRoL/crisp.

0.67

CQDC-Warp: GPU-Accelerated Differentiable Quasi-Dynamic Simulation for Contact-Rich Manipulation

cs.RO ·2026-10-15 ·Yanchen Ding, Jiayi Chen, Jianfeng Xu, Wei Zhao, Li Yi +1 more
benchmark similarity 0.62
Abstract

Efficient synthesis of contact-rich manipulation trajectories is essential for downstream robot learning. Gradient-based planning offers a promising approach, but jointly optimizing motion and contact decisions remains challenging. Meanwhile, many existing planners run on CPUs with limited throughput. We present CQDC-Warp, a GPU-accelerated differentiable quasi-dynamic simulator for batched model predictive control (MPC). We use it to study contact-guided trajectory optimization, in which intended robot--object contacts are specified before planning and encouraged through soft costs, while the simulated dynamics determine contact geometry and frictional response without a prescribed contact-mode schedule. Across $17{,}408$ trials on the $17$-object Allegro in-hand rotation benchmark, our framework achieves $79.8\%$ success, compared with $73.7\%$ for CFree and $65.2\%$ for IMPACT, and reduces mean trajectory-generation time by factors of $27.0$ and $50.2$, respectively. On a single NVIDIA RTX 4090 with $2{,}048$ parallel worlds, forward and backward throughput reach $2.06\times10^5$ and $2.25\times10^5$ world-steps per second, respectively. Further experiments cover manipulation with LEAP and Shadow hands, environmental contact exploitation, bimanual manipulation, whole-body control, and real-world trajectory replay on a Sharpa hand.

0.12