CS Paper Radar

Receding-Horizon Pushing with Composable Object-Centric Policies

Zhiyi Yuan, Tianrun Hu, Anxing Xiao, Yuhong Deng, David Hsu, Hanbo Zhang

cs.RO ·submitted 2026-09-20 08:15 UTC · v2

Abstract

Non-prehensile manipulation is practical for relocating large, heavy, or geometrically ungraspable objects. Yet, long-horizon pushing of arbitrarily-shaped 3D objects couples three problems: 1) where to push the object so as to approach the target pose, 2) whether each push is stable and reachable, 3) whether subsequent actions remain feasible. We present an object-centric pushing policy within a feedback-guided hierarchical framework. At the low level, a learning-based policy predicts contact actions from a pose- and scale-normalized point cloud, conditioned on a near single-step subgoal. A stability score is applied to evaluate the predicted contacts by a quasi-static sliding-versus-tipping analysis. At the high level, BIT$^*$ first searches for an object path, and the next several subgoals are checked by contact prediction and robot motion planning for future feasibility. Failed motion plans, as feedback, change the local path costs and trigger re-planning. During execution, only the first feasible action is executed. In simulation, we evaluate 22 objects in six different scenes, upon which we also conduct comprehensive ablation studies. Results demonstrate that our method outperforms baselines with a clear margin and can reliably achieve long-horizon object pushing tasks under different situations. We also report quantitative real-robot experiments with a Franka arm and qualitative demonstrations with a mobile manipulator for large and heavy objects, with directly zero-shot sim-to-real transfer.

Closest papers

Nearest neighbours by meaning across the whole index.

GOTT: Object-centric Dexterous Manipulation with a Reusable Cross-Embodiment Primitive

cs.RO cs.AIcs.CV ·2026-10-02 ·Yulin Liu, Lai Wei, Yen-Jen Wang, Akash Sharma, Pieter Abbeel +2 more
code/data similarity 0.73
Abstract · Project page: https://dex-gott.github.io/

Foundation models and large-scale human data provide rich sources of manipulation intent, but translating this intent into multi-fingered robot behavior remains difficult. Dexterous hands still lack a reusable low-level primitive that reliably establishes contact across tasks and embodiments. We propose GOTT, a reach-acquire-move framework built around a single cross-embodiment contact-acquisition primitive. Given a robot-agnostic object trajectory and a reach specification, GOTT first brings the hand near a task-relevant contact region. The shared closed-loop primitive then establishes stable contact from this approximate initialization, and a pose-conditioned controller tracks the desired object motion. Reach specifications may come from future-aware planning, external models, or human demonstrations, while the primitive and tracking backend remain unchanged. Simulation and real-world experiments show that GOTT is able to establish robust contact across diverse objects, arm-hand platforms, and seen and unseen hand morphologies. It also consistently improves end-to-end task success over open-loop grasp execution.

0.45

From Prediction to Action: Learning Physical Context for Deformable Linear Object Manipulation

cs.RO ·2026-11-10 ·Chengxiao Dong, Alessio Caporali, Hongyu Lan, Gianluca Palli
similarity 0.72
Abstract · Submitted to ICRA 2027

A representation that accurately predicts a deformable object's response is not necessarily the one most useful for choosing manipulation actions. We study this distinction between predictive utility and decision utility in planar single-grasp shape control of Deformable Linear Objects (DLOs). As a common decision backbone, we introduce Geometry-Pointer-Flow (GPF), a geometry-grounded policy that separates grasp-location selection from grasp-conditioned motion generation. Its geometry-only variant reduces one-step executed shape error by 32.8% relative to a DLO-specific diffusion policy, while using 18.7 times fewer parameters and achieving approximately 193 times faster inference. On this backbone, we compare physical context represented by ground-truth parameters, estimated parameters, and learned interaction-history representations, for both forward prediction and executed control. For prediction, ground-truth physical parameters reduce next-shape error by 15.8% over geometry alone, and estimated parameters are slightly more predictive than interaction history. This ordering does not carry over to control: estimated parameters provide no detectable one-step control gain, whereas history-conditioned GPF reduces executed error by 9.9% relative to geometry-only GPF across 470 paired simulation trials. In closed loop, interaction history improves strict-threshold attainment in simulation and yields the strongest zero-shot performance on hardware. All policies are trained exclusively in simulation and transferred to the physical robot without real-world training or fine-tuning. These results show that physical context should be evaluated by the decisions it supports rather than by predictive accuracy alone. Code will be released upon acceptance.

0.12

Uni-PNP: Unified Prehensile and Non-prehensile Policy Learning for Generalizable Object Pose Reaching

cs.RO ·2026-10-15 ·Wenxuan Zhu, Yuze Wang, Jiangran Lyu, Jiayi Chen, Yixin Zheng +4 more
code/data similarity 0.72
Abstract

Object manipulation often requires combining non-prehensile actions with grasping. However, existing approaches typically develop these capabilities separately and integrate them by sequencing distinct primitives through prescribed intermediate objectives, limiting the coordination of contact motions and grasping. Their integration also remains sensitive to object and gripper geometry and depends on particular environmental supports, complicating real-world deployment. We present Uni-PNP, a unified policy that jointly learns prehensile and non-prehensile manipulation for object pose reaching across diverse objects and grippers. To achieve this, we first pretrain a geometry encoder to predict contact-induced object motion using a contact-dynamics dataset constructed from simulated interactions between diverse objects and grippers. We then train the policy in a two-stage reinforcement learning curriculum from graspable objects to ungraspable peers, encouraging the discovery of non-prehensile interactions and their integration with grasping. Experiments show 76.39% success on hundreds of seen objects with grippers, and 57.91% on unseen peers, outperforming the strongest pose-reaching baseline by 20.52 and 17.79 percentage points, respectively. We also analyze emergent behaviors, including nonprehensile and prehensile repositioning, grasp acquisition that requires grasping after tipping, and table-assisted reorientation while grasping, and transfer to the real-world scenario. Project page available at lgswdn.github.io/Uni-PNP.

0.23

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.71
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

CQDC-Warp: GPU-Accelerated Differentiable Quasi-Dynamic Simulation for Contact-Rich Manipulation

cs.RO ·2026-10-15 ·Yanchen Ding, Jiayi Chen, Jianfeng Xu, Wei Zhao, Li Yi +1 more
benchmark similarity 0.71
Abstract

Efficient synthesis of contact-rich manipulation trajectories is essential for downstream robot learning. Gradient-based planning offers a promising approach, but jointly optimizing motion and contact decisions remains challenging. Meanwhile, many existing planners run on CPUs with limited throughput. We present CQDC-Warp, a GPU-accelerated differentiable quasi-dynamic simulator for batched model predictive control (MPC). We use it to study contact-guided trajectory optimization, in which intended robot--object contacts are specified before planning and encouraged through soft costs, while the simulated dynamics determine contact geometry and frictional response without a prescribed contact-mode schedule. Across $17{,}408$ trials on the $17$-object Allegro in-hand rotation benchmark, our framework achieves $79.8\%$ success, compared with $73.7\%$ for CFree and $65.2\%$ for IMPACT, and reduces mean trajectory-generation time by factors of $27.0$ and $50.2$, respectively. On a single NVIDIA RTX 4090 with $2{,}048$ parallel worlds, forward and backward throughput reach $2.06\times10^5$ and $2.25\times10^5$ world-steps per second, respectively. Further experiments cover manipulation with LEAP and Shadow hands, environmental contact exploitation, bimanual manipulation, whole-body control, and real-world trajectory replay on a Sharpa hand.

0.12

Contact-Guided Exploration for Non-Prehensile Locomanipulation with Multi-Critic RL

cs.RO ·2026-08-28 ·Simone Tolomei, Mayank Mittal, Franco Angelini, Manolo Garabini, Paolo Salaris +1 more
top venue similarity 0.71
Abstract · project website: https://tolomeis.github.io/contact-guided-exp Accepted in IEEE Robotics and Automation Letter (RA-L) 8 pages, 9 figures

Non-prehensile manipulation offers versatile skills for moving and rearranging heavy or bulky objects, particularly when combined with a mobile manipulation platform. However, both model-based and model-free approaches struggle with the complex hybrid dynamics and the sparsity of the contact in these tasks. To address these challenges, we propose a contact-guided exploration strategy implemented within a Multi-Critic Reinforcement Learning (RL) framework. A dedicated exploration critic is trained with a dense contact-seeking reward that guides the end-effector toward meaningful contact points; its influence is progressively decayed to recover a task-optimal policy. We obtain candidate interaction points from a general-purpose grasping algorithm, enabling the exploration mechanism to generalise across various object geometries. We evaluate the approach on multiple tasks, including box pushing, chair transportation, and a dishwasher opening task. Finally, we validate the chair transportation policy through extensive experiments on a quadrupedal mobile manipulator, demonstrating deployable non-prehensile manipulation in the real world.

0.37

An Empirical Study of Reinforcement Learning for Keypoint Positioning of Deformable Linear Objects

cs.RO ·2026-11-05 ·Vinay Rodrigues, Sara Zeynalpour, Gokhan Solak, Sebastian Hjorth, Arash Ajoudani
similarity 0.70
Abstract

Deformable linear object (DLO) manipulation is challenging because high-dimensional configurations, nonlinear contact dynamics, and diverse material and geometric properties produce a broad range of object responses that are both difficult to model and data-intensive to learn. This work studies reinforcement learning for planar manipulation of a one-end-grasped DLO, focusing on training efficiency, observation design, robustness, and zero-shot sim-to-real transfer. We compare three Proximal Policy Optimization training stacks and find that the GPU-parallel MuJoCo Playground stack enables faster convergence and more consistent performance than CPU-based alternatives under the same wall-clock budget. Relative keypoint observations and an asymmetric actor-critic formulation further improve learning efficiency. Policies trained with observation noise, delay, domain randomization, and disturbances achieve simulation success rates of 96.4% for single-point tracking, 98.0% for disturbance recovery, and 88.8% for two-point tracking. Using markerless RGB-D keypoint estimation, the policies transfer without real-world fine-tuning, succeeding in 9/10, 10/10, and 8/10 physical trials, respectively.

0.09

MotionForge: A Data Generation Pipeline and Large-Scale Benchmark for Long-Horizon Manipulation of Dynamic Objects with Domain Shifts

cs.RO ·2026-09-22 ·Mohan Liu, Dengchen Mei, Haotian Xian, Ruyang Han, Jiayi Sun +5 more
benchmark similarity 0.70
Abstract · 9 pages

Recent advances in learning-based robot policies have demonstrated promising progress, yet they are predom- inantly evaluated in static or quasi-static environments. In dynamic manipulation, objects and scenes continuously evolve while the robot perceives, reasons, and acts. However, recent dynamic simulation benchmarks largely focus on short-horizon, reactive interactions with simple motion patterns and offer limited support for both systematic evaluation under domain shifts and model-agnostic real-time execution protocols. To bridge these gaps, we introduce MotionForge, the first large- scale simulation benchmark and data-generation pipeline tailored to jointly evaluate domain shifts and long-horizon interaction in dynamic manipulation. MotionForge comprises 40 dynamic interaction tasks spanning 11 distinct motion patterns, with dedicated support for 17 long-horizon tasks. Our benchmark introduces two key novelties: (1) a systematic evaluation protocol for assessing policy robustness under both single-factor (e.g., only backgrounds shift) and joint domain shifts (e.g., simultaneous shifts of objects, backgrounds, lighting, and speed); and (2) a decoupled, latency-aware execution protocol where the environ- ment continuously evolves independently of policy inference time. Extensive evaluations of representative general-purpose robot policies on our benchmark reveal substantial limitations under joint domain shifts. These findings expose a critical gap between current policy capabilities and the requirements of robust long- horizon manipulation of dynamic objects under domain shifts, establishing MotionForge as a comprehensive testbed for future research in embodied AI.

0.21