CS Paper Radar

FlexWorm: Primitive-augmented Hybrid Contact-motion Planning for Suction-based Multi-segment Deformable Robots

Zili Tang, Tiecheng Guo, Qinyue Zhang, Meng Guo

cs.RO ·submitted 2026-08-17 17:37 UTC · v2
top venue

Abstract

Multi-segment suction-based soft robots are promising for inspection and maintenance in confined or fragile environments, but existing approaches still depend heavily on manually designed gaits and environment-specific motion scripts. This work presents a planning framework for serial multi-segment soft robots with deformable body segments and boundary suction pads. The formulation targets full 3D navigation on complex surfaces and explicitly handles discrete adhesion switching and continuous body deformation under geometric, collision, and quasi-static feasibility constraints, while remaining agnostic to the specific actuation realization used to produce segment deformation. Its core, block-wise IK hybrid search (IKHS), performs best-first search over feasible adhesion transitions while solving inverse kinematics only on induced free blocks. On top of IKHS, primitive-augmented hybrid search (PaHS) uses a learned observation--primitive embedding to retrieve short validated motion segments for fast local proposal, with fallback to standard IKHS branching when retrieval fails. In simulation, the framework consistently outperforms controlled baselines in planning success, transition quality, and efficiency across diverse terrains. PaHS matches IKHS in success rate while substantially reducing planning time. Repeated hardware experiments on a pneumatic multi-segment soft robot further demonstrate executability and online recovery under actuation and adhesion uncertainty.

Comment
13 pages, 18 figures, accepted for publication in IEEE Robotics and Automation Letters (RA-L), 2026. Supplementary video: https://youtu.be/OQR5Sx5Bwnc

Closest papers

Nearest neighbours by meaning across the whole index.

Optimize, Learn, Refine: Whole-Body Grasping and Pick-and-Throw with a Spiral Soft Robot

cs.RO ·2026-09-22 ·Marwah Basuhai, Tingcong Liu, Ibrahim Alsarraj, Yuhao Wang, Ke Wu
hot direction similarity 0.65
Abstract

Soft continuum robots can exploit distributed compliance for whole-body manipulation, but synthesizing behavior through changing contacts remains difficult. We address whole-body grasping and pick-and-throw from an initially ungrasped state through outcome-based actuation-space optimization. Grasping is quantified by tip angular sweep and body-object enclosure, while throwing further incorporates release-direction alignment and minimum release speed. These objectives allow grasping, acceleration, and release to emerge from compliant interaction without prescribing contact forces, contact locations, or body configurations. Because the resulting actuation-to-outcome mapping is nonsmooth, we utilize derivative-free CMA-ES within an optimize-learn-refine framework. CMA-ES generates solutions for sampled conditions, a task-conditioned predictor learns warm starts, and CMA-ES refines them for unseen conditions. In simulation, the method achieves 492/500 successful grasps (98.4%) and success rates of 98%, 97%, and 94% across three directional throwing trials. Learned initialization increases grasping success from 78.6% to 98.4% while reducing the median rollout count from 1184 to 816 in CMA-ES. Hardware experiments achieve a 100% grasping success rate across 50 executions and a 100% pick-and-throw success rate across 30 executions, with 10 repetitions per direction. Together, these simulation and hardware results demonstrate the effectiveness of the proposed framework across both simulated and physical whole-body manipulation tasks.

0.26

Riemannian Optimization-based Whole-body Obstacle Avoidance for Mobile Continuum Robots in Cluttered Environments

cs.RO ·2026-11-04 ·Duo Tang, Ping Deng, Sophie Armanini, Yajing Shen, Toshio Fukuda +2 more
similarity 0.63
Abstract

Inspired by the coordination of global motion and local shape adaptation in snakes, elephant trunks, and octopus arms, we propose a unified planning and control framework for mobile continuum robots in cluttered and confined environments. Existing approaches often address high-level path planning and local motion control separately, limiting coordinated base-arm motion, kinematic consistency, and collision avoidance. Our framework integrates long-horizon trajectory planning with real-time geometric refinement under kinematic and environmental constraints. The global layer combines A* search with minimum-jerk planning to generate smooth reference trajectories. The local layer uses a geometry-consistent inverse kinematics solver and Riemannian optimization to coordinate mobile-base motion and continuum deformation while avoiding obstacles. We evaluate the framework through simulated pipe-traversal tasks with multiple baseline planners and real-world experiments involving navigation among dense obstacles and manipulation in confined spaces. Results demonstrate improved motion consistency, feasibility, and adaptability, supporting coordinated whole-body motion of mobile continuum robots in constrained environments.

0.27

Manipulation Feasible Navigation Among Movable Obstacles with Discrete Contact Pushing

cs.RO ·2026-09-20 ·Shaohu Wang, Aiguo Song, Yulong Yuan, Zhongyu Sun, Tianyuan Miao +1 more
code/datahot direction similarity 0.61
Abstract

In environments with large movable obstacles, detour-only navigation can be inefficient or even infeasible, while obstacle interaction requires reasoning about navigation benefit, feasible placement, and executable manipulation. We present a hierarchical navigation among movable obstacles (NAMO) framework for mobile manipulators. At the high level, the planner identifies key blocking obstacles from reference paths and searches for relocation plans that jointly satisfy geometric, manipulation, and downstream navigation constraints. When direct relocation is hindered by other movable objects, a large language model (LLM) is selectively invoked to infer auxiliary manipulation dependencies, which are then verified by deterministic geometric planning. To execute the resulting relocation goals, we define discrete contact modes on the surfaces of box-shaped obstacles and select contact faces and regions online based on position and orientation errors, enabling straight, side, and corner pushing through contact switching. A recurrent reinforcement-learning policy coordinates the mobile base and manipulator to track tool center point (TCP) targets while preserving end-effector reachability during sustained pushing. Simulation and real-robot experiments demonstrate feasible navigation-manipulation in detour, single- and multi-obstacle relocation, and dependency-constrained scenarios, validating the framework for interactive navigation with large non-graspable obstacles. The open-source project is available at https://cloudytosunny.github.io/NAMO_DCPushing/.

0.37

Fast Motion Retargeting Pipeline for Scalable Humanoid Robot Learning

cs.RO ·2026-10-20 ·Daniel Marew, Sangjun Park, Nisal Perera, Donghyun Kim
code/data similarity 0.60
Abstract

While large-scale human motion capture datasets provide a rich source of demonstrations for humanoid robot learning, retargeting the diverse motions to different humanoid robots remains a nontrivial challenge. Existing kinodynamic trajectory optimization pipelines are computationally expensive and often require manual adjustments per motion. We present FRDV (Fast Retargeting with Dynamics Validation), a scalable framework consisting of rapid constrained kinematic retargeting and an additional dynamics validation pipeline. Its kinematic stage integrates a custom Sequential Quadratic Programming solver, Real-Time Iteration, and parallel chunk-based processing, achieving up to 9,156 frames per second, approximately up to 136 times faster than GMR and ProtoMotions, while robot-specific constraints are incorporated into the optimization to reduce common retargeting artifacts, such as ground penetration and self-collision. For motions requiring additional verification, a contact implicit iLQR controller is utilized to test the retargeted reference under full rigid body dynamics. This dynamics-based validation identifies dynamically infeasible motions and refines contact-related artifacts such as foot floating and foot skating. We evaluate retargeting quality by training motion tracking reinforcement learning policies using several state-of-the-art pipelines and comparing their tracking fidelity and success rates. Furthermore, sim-to-real transfer is demonstrated on a Unitree G1 humanoid. Videos and code are available at: https://daroslab.github.io/frdv/.

0.17

PneuGen: Task-Driven Agentic Co-Design of Soft Pneumatic Robots

cs.RO ·2026-11-09 ·Shaohong Zhong, Marco Pontin, Perla Maiolino
similarity 0.60
Abstract

Task-driven design of soft robots requires the consideration of factors such as geometry, morphology, material properties, and actuation, resulting in a large and complex design space that is challenging to explore. Computational optimisation methods leverage signals from simulation to iteratively improve designs to achieve task objectives. However, these methods typically demand high computational load for both optimisation and simulation. We present PneuGen, an agentic co-design framework for soft robots that leverages Large Language Model (LLM) agents to search over the soft robot design space efficiently. A designer agent proposes design programs from a parametric component library, and a separate critic agent analyses simulation diagnostics and recommends targeted revisions. Fitted module response models provide reusable physical priors relating geometry and pressure to deformation. Design programs are automatically validated and converted into finite-element simulations, enabling iterative evaluation. Across grasping tasks on primitive shapes and challenging objects, as well as shape-matching tasks that require multi-directional planar and 3D deformation, the proposed framework significantly outperforms prior computational optimisation baselines. Ablation experiments also highlight the utility of the critic agent and the module response model in facilitating efficient design. We additionally demonstrate the agent-generated soft robot designs in real-world shape-matching and grasping tasks.

0.12

SPROUT: The Open-Source Soft Growing Robot for Search and Rescue

cs.RO eess.SY ·2026-09-15 ·Antonio Alvarez Valdivia, Ciera McFarland, Robert Reeve, Ankush Dhawan, Chad Council +3 more
code/data similarity 0.60
Abstract

Soft robotic systems have long been theorized as ideal candidates for use in search and rescue operations; however, there have been significant barriers to entry in graduating soft robotic systems from the laboratory to the field. To address this gap in replicable, reliable soft robot systems, we present the designs for SPROUT, the Soft Pathfinding Robotic Observation Unit. The system has matured over years of interaction with professional urban search and rescue communities, with the goal of operating in dusty, wet, and isolated conditions. This manuscript contains supplementary material, including code, parts manifests, CAD assemblies, and build instructions to allow the broader robotics research community to build their own SPROUT systems. The modular hardware and ROS 2-based software stack support task-specific payloads and control functions, allowing SPROUT to be adapted for applications beyond search and rescue, including infrastructure inspection and archaeology. Here, we demonstrate SPROUT performing a variety of challenging inspection and traversal tasks in collapsed structure training sites used by first responders. The main project page is available online at https://sprout-mitll.github.io/sprout/.

0.32

GOTT: Object-centric Dexterous Manipulation with a Reusable Cross-Embodiment Primitive

cs.RO cs.AIcs.CV ·2026-10-02 ·Yulin Liu, Lai Wei, Yen-Jen Wang, Akash Sharma, Pieter Abbeel +2 more
code/data similarity 0.59
Abstract · Project page: https://dex-gott.github.io/

Foundation models and large-scale human data provide rich sources of manipulation intent, but translating this intent into multi-fingered robot behavior remains difficult. Dexterous hands still lack a reusable low-level primitive that reliably establishes contact across tasks and embodiments. We propose GOTT, a reach-acquire-move framework built around a single cross-embodiment contact-acquisition primitive. Given a robot-agnostic object trajectory and a reach specification, GOTT first brings the hand near a task-relevant contact region. The shared closed-loop primitive then establishes stable contact from this approximate initialization, and a pose-conditioned controller tracks the desired object motion. Reach specifications may come from future-aware planning, external models, or human demonstrations, while the primitive and tracking backend remain unchanged. Simulation and real-world experiments show that GOTT is able to establish robust contact across diverse objects, arm-hand platforms, and seen and unseen hand morphologies. It also consistently improves end-to-end task success over open-loop grasp execution.

0.45

Real-Time Whole-Body Safe Motion Generation for Multi-Segment Tendon-Driven Continuum Robots

cs.RO ·2026-09-22 ·Fangju Yang, Siyi Ma, Tonghao Guan, Tingcong Liu, Hang Yang +3 more
hot direction similarity 0.59
Abstract

Real-time motion generation for tendon-driven continuum robots requires accurate modeling of nonuniform bending and whole-body collision avoidance. This paper presents a unified actuation-space framework for planar multi-segment tendon-driven continuum robots. An energy-based variable-curvature model captures spatially varying tendon spacing and bending stiffness and provides analytical Jacobians for differential inverse kinematics and safety monitoring. A multipoint CBF-QP enforces backbone clearance under obstacle motion and actuation-velocity bounds, while its decision dimension depends only on the number of independently actuated segments. The model closely agrees with GVS references, with a maximum curvature error of $5.223 \times 10^{-2}\,\mathrm{m}^{-1}$. Over 100 MuJoCo trials, the proposed method achieves collision-free success rates of 96% and 100% in static and dynamic scenarios, respectively, compared with approximately 60% and 80% without CBF constraints. Hole-traversal tests further demonstrate safe motion in constrained environments. With 600 backbone monitoring points, the mean control-step time is 6.66 ms, demonstrating real-time whole-body safe motion generation.

0.29